Audioplex OA-602 Manuale utente
INSTALLATION MANUAL
TECHNOLOGY
OA-502 / OA-602
1) When mounting speakers, use the mounting bracket as a template for marking and drilling three holes.
2) Assemble mounting screws, spring washers, flat washers and nuts to attach mounting brackets to mounting
surface. Note that - screws, washers and nuts provided are for mounting the cabinet from both sides of the
mounting location. For any other type of mounting, please consult your local hardware store for appropriate
mounting screws.
3) Follow the hook-up directions included with your amplifier (or receiver). Strip 1/2" (12mm) of insulation from
each of the two conductors of the wire to expose the bare metal and twist each into a single strand. Connect
insulated speaker wire to the speaker using the black wire with the white stripe as "+" lead which should be
connected to the RED terminal and connect the plain black wire as "-" lead to the BLACK terminal.
4) Adjust position of the speaker to obtain the desired sound dispersion.
AUDIOPLEX TECHNOLOGY
404 GWH PO BOX 440
MELVIN VILLAGE, NH 03850 USA
PARTS INCLUDED
Insulated Wire
Mounting Bracket
Bracket Knob
Mounting Screw
Flat Washer
Screw nut
Speaker
(2)
(2)
(4)
(4)
(4)
(4)
(2)
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Audioplex Altoparlanti
