Important notice
Copyright products are not explicitly indicated in this manual. The absence of the
trademarks (™ or ®) and copyright © symbols does not imply that a product is not
protected.
AutarcTech does not take responsibility for any inaccuracy, nor does it give any guarantee
nor excepts any liability whatsoever for consequential damages resulting from the use of
this manual or it’s associated product.
AutarcTech also o"ers no guarantee from the improper usage or installation of the
hardware or software.
© Copyright 2019 AutarcTech, D-91522 Ansbach, Technologiepark 1, +49 981 9878
The JOULIE must not be used without the express permission of the manufacturer in
safety-critical areas, e.g. hospitals.
The JOULIE must not be used in open or unprotected rooms. It has neither a contact
protection nor a protection against the penetration of water or other foreign objects
(protection class IP00).
The JOULIE is intended for use with lithium cells only, but it should operate with any cell
from 1.8 - 4.5V.
It is essential that the appliance is used as intended. The manufacturer assumes no
liability for damage resulting from improper use.
No modifications, either mechanical or electrical, are permitted without the manufacturer's
approval. Only the parts specified by the manufacturer may be used for conversions and
accessories. In the case of infringements, the manufacturer 's conformity and warranty are
void. The risk is then borne by the user alone.
The RJ45 (UP/DOWN) wires are galvanically isolated to the BMS.
When connecting external systems, be aware that there may be high voltages
depending on the connections. Please avoid connecting multiple Serial-to-USB
converters to multiple JOULIE boards on the same external system, e.g. a PC.
The GND level is the plus level of the predecessor board! Only within the same
JOULIE you can use GND as reference potential.
If you have questions regarding the BMS which have not been answered by this manual,
please contact AutarcTech before you connect the BMS with the battery:
AutarcTech GmbH, Technologiepark 1, 91522 Ansbach, Ph.: +49 981 9878 7374,
