AutoTest Workshop Pro Manuale utente

User Manual

Version 1.05

AUTO

Test

Workshop Pro

AutoTest Workshop Pro User Manual Page 2

N17561

DECLARATION OF CONFORMITY

We, Auto Test Products Pty Ltd. declare under our sole responsibility that the product Workshop Pro is in conformity with the provisions of the following

Council Directive: 1999/5/EC.

A copy of the Declaration of Conformity is available from http://www.autotest.net.au

Copyright in the drawings, information and data recorded in this document (the information) is the property of AutoTest Products. This document and

the information are solely for the use of the authorised recipient and this document may not be used, copied, or reproduced in whole or part for any

purpose other than thatfor which it was supplied by AutoTest Products. AutoTest Products makes no representation, undertakes no duty, and accepts

no responsibility to any third party who may use or rely upon this document or the information.

Under no circumstances shall AutoTest Products be responsible for any loss of data or income or any special, incidental, consequential or direct

damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind,

either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation

to the accuracy, reliability or contents of this document. AutoTest Products reserves the right to revise this document or withdraw it at any time without

prior notice.

 
 
AutoTest Workshop Pro User Manual Page 1 
 
Table of Contents 
 
AutoTest Workshop Pro 
 
PREFACE..................................................................................................................................................................... 2 
FOR YOUR SAFETY....................................................................................................................................................2 
WARRANTY .................................................................................................................................................................3 
1 AUTHORISED SERVICE AGENTS..........................................................................................................................4 
UNPACKING AND FIRST TIME USE..........................................................................................................................5 
1 Activating your Workshop Pro...................................................................................................................................5 
OPERATION...............................................................................................................................................................12 
1 Test Conditions & Test Area...................................................................................................................................12 
2 Set-up in Vehicle.....................................................................................................................................................12 
3 Running a test.........................................................................................................................................................12 
4 Reviewing a test......................................................................................................................................................13 
5 Printing a test ..........................................................................................................................................................14 
6 Saving the test to read with NetBrake™.................................................................................................................14 
DATABASE ................................................................................................................................................................16 
1 Viewing Test, Deleting Test or More Test Information............................................................................................16 
SETTINGS ..................................................................................................................................................................17 
1 Activation.................................................................................................................................................................17 
2 Calibration...............................................................................................................................................................18 
3 Bluetooth.................................................................................................................................................................19 
4 Check for Updates ..................................................................................................................................................20 
RETURN OF WORKSHOP PRO................................................................................................................................21 
1 Packaging ...............................................................................................................................................................21 
2 Shipping ..................................................................................................................................................................21 
3 Documentation........................................................................................................................................................21 
MAINTENANCE AND TROUBLESHOOTING...........................................................................................................21 
 
 
 

AutoTest Workshop Pro User Manual Page 2

1. Preface

Thank you for purchasing AutoTest products. Please read this manual completely

before installing and operating the product so as to ensure correct operation of the

product. Make certain that this manual can be accessed whenever necessary.

2. For Your Safety

Read these simple guidelines. Not following them may be dangerous. Read the

complete user guide. Further detailed information is given in this manual.

SWITCH ON SAFELY

Do not switch the device on when wireless device use is prohibited or when

it may cause interference or danger.

SWITCH OFF WHEN REFUELING

Do not use the device at a refuelling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY

Use only in the positions as explained in the product documentation.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user's guide for detailed safety

instructions. Do not connect incompatible products.

RISK OF DAMAGE TO EYES

Wear safety goggles when operating near vehicle battery as Battery acid,

fumes, oil and dust particles might cause damage to the eyes.

AutoTest Workshop Pro User Manual Page 3

3. WARRANTY

AutoTest Products Pty Ltd or any Authorised AutoTest Service Centre warrants this

product against defects in material and workmanship for a period of 12 months from

the original date of purchase. This warranty applies only to products and components

supplied by AutoTest Products which can be identified by the trade name or logo

affixed to them or by other documents. AutoTest Products does not warrant any

products not supplied by AutoTest Products.

Note: The use of proper paper is very important to the operation of the printer. Use of

non-standard paper will jam the printer and/or wear the print head. Use of non-

standard paper will void the warranty.

During the warranty period, AutoTest Products or any Authorised Service Centre will

repair (or at its option replace) any defective component(s) without charge for parts

or labour, provided the product is freight prepaid to an authorised AutoTest Service

Centre. Transit insurance and return freight will be at the owner’s expense.

In order to obtain calibration, warranty or non-warranty service, ship the product,

freight and insurance prepaid to your nearest AutoTest Service Centre. Attach to the

product your name, address, contact phone numbers, description of the problem and

if a warranty claim, proof of purchase (dated sales receipt or invoice).

AutoTest Products or any Authorised AutoTest Service Centre reserves the right to

refuse warranty repair if accident, abuse, misuse or misapplication has damaged the

product. In transit or as a result of service or modification by other than an Authorised

Service Centre, nor are any other warranties expressed or implied, including any

regarding merchantability or fitness for any other particular purpose.

AutoTest Products or any Authorised Service Centre is not responsible for incidental

or consequential damages resulting from the breach of any express or implied

warranty, including damage to property and, to the extent permitted by law, damages

for personal injury.

AutoTest Workshop Pro User Manual Page 4

3.1 AUTHORISED SERVICE AGENTS

AUSTRALIA

Burson Auto Parts (Head Office)

61 Gower Street, Preston VIC 3072

PH: 1300 287 766

NEW ZEALAND

Brake & Transmission NZ

21-27 Omega St., Albany, Auckland

PH: (+ 64) 9414 3205

MALAYSIA

Tritech Sdh Bhd

38, Jalan Pandan Indah, Kaw. Industri Ampang Tambahan,

Ampang, 68000 Ampang Jaya,Selangor

PH: (+603) 4291 0988

UNITED KINGDOM

Tecalemit Garage Equip. Co. Ltd

Unit 2,Eagle Road, Langage Bus Pk., Plympton, Plymoth, Devon, PL7 5JY

PH: (+017) 5221 9150

UNITED STATES OF AMERICA

Commercial Vehicle Consultants Inc.

144 Overlook Ave, Staten Island, NEW YORK, 10304.

PH: (+171) 8980 3651

The full list of Authorised Service Centres can be found here:

http://www.autotest.net.au/distributors/

Alternatively, you can contact the AutoTest Service Department by Phone: (+61 3)

88403016

AutoTest Workshop Pro User Manual Page 5

4. UNPACKING AND FIRST TIME USE

Congratulations on your choice of an AutoTest Workshop Pro. Please take the time

to read this User’s Manual before using the AutoTest Workshop Pro in the field.

Incorrect or inappropriate use of this instrument may void the warranty. Retain the

packing materials for future shipping and transport of the unit. Please complete the

warranty registration card and post it to AutoTest Products Pty Ltd, alternatively visit

our website www.autotest.net.au and complete your warranty registration on line.

Your warranty registration ensures that you are kept up to date on any software or

hardware changes to your AutoTest Workshop Pro. The packing box of your

Workshop Pro should contain the following:

1. AutoTest Workshop Pro tablet

2. USB-A to Micro-USB Battery Charger / Data Cable

3. USB-A Female to Micro-USB adapter cable

4. AU Power Plug Adapter

5. 2 Pole Power Socket to USB adapter Plug

6. NetBrake software suite

4.1 Activating your Workshop Pro

When you power the device it will automatically open the application. At this point your

software will not have been activated. You will need to follow the subsequent steps in

order to activate it.

Note: The license that will be applied by the end of this process expires every 6

months and will require reactivation upon expiration.

Step 1. Switch on Workshop Pro tablet by holding down the On/Off button (top)

Step 2. Wait for the tablet to complete its booting phase

AutoTest Workshop Pro User Manual Page 6

Step 3. The app should begin without interaction and prompt “Looking for GPS time”

(Figure 1)

Figure 1

NOTE: if instead you see a prompt to Enable Location you need to enable Location

settings for the app by selecting the “Location Settings” (Figure 2)button and enable

the slider in the top right of the Location screen (Figure 3).

Figure 2

Figure 3

When prompted to improve location accuracy you should agree if you intend to connect

your tablet to Wi-Fi or provide it with a Sim card. Once you have agreed/disagreed hit

the return button ( ) in the tablet navigation bar located on the edge of the screen.

Figure 4

AutoTest Workshop Pro User Manual Page 7

Step 4. At this point, the tablet will require either a Wi-Fi connection or a GPS signal. If

you have already connected the Workshop Pro to Wi-Fi then you can wait; otherwise

you need to connect to the Wi-Fi or take the tablet outside (under the sky) for it to

acquire a GPS signal (this can take up to 10 minutes). This process needs to be

repeated every time the Workshop Pro application is started. Don’t close the

app if you want to avoid having to do this.

Step 5. If this isn’t the first time you’re activating the device then proceed to the

next Step. The software will be prompt you for automatic activation. Select “Yes” and

your license will become active. (this will activate the complimentary 6 month license

you are supplied with at purchase)

ONLY PROCEED FROM HERE IF YOU ARE RE-ACTIVATING YOUR DEVICE AND

THIS ISN’T THE FIRST TIME IT IS BEING ACTIVATED

BEFORE YOU PROCEED:

You will require the following to activate your Workshop Pro.

•Workshop Pro Tablet

•Computer

•Telephone + Email Address

•USB cable for Workshop Pro

AutoTest Workshop Pro User Manual Page 8

Step 6. Once the prompt disappears and you are on the main application window select

“SETTINGS” (Figure 5) where the “Activation” button will read “Brake meter is not

activated, requires reactivation”

Figure 5

Figure 6

Step 7. Hit the Activation button (Figure 6) and you will be prompted with a banner

directing you to contact AutoTest along with an ID number. At this point you must

contact AutoTest or your local supplier and provide them with your details (including

the ID number on screen).

Figure 7: ID number

ONLY PROCEED FROM HERE AFTER ACQUIRING A LICENSE TOKEN FROM

YOUR LOCAL DISTRIBUTOR.

Step 8. Find your License file and make sure it’s saved somewhere on your computer.

Step 9. Plug your tablet into your computer with the supplied USB cable.

Indice

Altri manuali AutoTest Apparecchiature di prova

AutoTest

AutoTest AUTOSTOP Micro Plus Manuale utente

AutoTest

AutoTest BST-380 Manuale utente

AutoTest

AutoTest WorkshopPro 10 Manuale utente

AutoTest

AutoTest autostop maxi Manuale utente

AutoTest

AutoTest Euro Trailer Socket Tester Manuale utente

AutoTest

AutoTest AutoStop Mini Plus Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente