Avalue Technology AID-240SBW Manuale utente

Part No: E2017A4B0A1R

Avalue Intelligent Display & System

AID-240SBW

Fanless Medical Panel PC with 5th Gen Intel®

Core i7 Processor and 24"Full HD IPS Multi

Touch LCD

User Manual

2nd Ed- 23 March 2016

AID-240SBW Quick Reference Guide

Instructions for the User

The document combines text and illustrations, providing a comprehensive overview of

the system. The information is presented as a sequential steps of actions, allowing

the user to learn directly how to use the device.

The text provides explanations and instructs the user step-by-step in the practical use

of the product, with short, clear instructions in an easy-to-follow sequence.

Definitions

Warning! A WARNING statement provides important information about a potentially

hazardous situation which, if not avoided, could result in death or serious

injury.

Caution! A CAUTION statement provides important information about a potentially

hazardous situation which, if not avoided, may result in minor or

moderate injury to the user or patient or in damage to the equipment or

other property.

Note! A NOTE provides additional information intended to avoid inconveniences

during operation.

Safety Instructions

1. Strictly follow these Instructions for Use, please read these safety instructions

carefully.

2. Remind to keep this User's Manual for later reference, and any use of the product

requires full understanding and strict observation of all portions of these instructions.

Observe all WARNINGS and CAUTIONS as rendered throughout this manual and on

labels on the equipment.

3. Repair of the device may also only be carried out by trained service personnel.

Avalue recommends that a service contract be obtained with Avalue Service and that

all repairs also be carried out by them. Otherwise the correct functioning of the device

may be compromised.

AID-240SBW Quick Reference Guide

Warning! Because of the danger of electric shock, never remove the cover of a

device while it is in operation or connected to a power outlet.

4. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the

user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

5. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning and keep this equipment away from

humidity.

Caution! To avoid short-circuiting and otherwise damaging the device, do not allow

fluids to come in contact with the device. If fluids are accidentally spilled

on the equipment, remove the affected unit from service as soon as

possible and contact the service personnel to verify that patient safety is

not compromised.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it

fall may cause damage. For plug-in equipment, the power outlet socket must be

located near the equipment and must be easily accessible.

Caution! To prevent overheating, do not cover the openings and place the device in

direct sunlight or near radiant heaters.

AID-240SBW Quick Reference Guide

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet. Position the power cord so that people cannot step on

it. Do not place anything over the power cord. If the equipment is not used for a long

time, disconnect it from the power source to avoid damage by transient over voltage.

Caution! Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20°C (-4°F) or above 60°C (140°F).

this may damage the equipment.

8. If your computer is losing dramatic time or the BIOS configuration reset to

default, the battery has no power.

Caution! Do not replace battery yourself. Please contact a qualified technician or

your retail. The computer is provided with a battery-powered real-time

clock circuit. There is a danger of explosion if battery is incorrectly

replaced. Replace only with same or equivalent type recommended by

the manufacture. Discard used batteries according to the manufacturer’s instructions

9. Improper installation of VESA mounting can result in serious personal injury! VESA

mount installation should be operated by professional technician, please contact the

service technician or your retail if you need this service.

10. Environmental protection: follow national requirements to dispose of unit.

11. Maintenance: to properly maintain and clean the surfaces, use only the approved

products or clean with a dry applicator.

12. Make sure the user not to contact SIP/SOPs and the patient at the same time.

13. When networking with electrical devices, the operator is responsible for ensuring

that the resulting system meets the requirements set forth by the following standards:

–EN 60601-1 (IEC 60601-1)

Medical electrical equipment

Part 1: General requirements for safety

–EN 60601-1-1 (IEC 60601-1-1)

Medical electrical equipment

Part 1-1: General requirements for safety

AID-240SBW Quick Reference Guide

Collateral standard: Safety requirements for Medical electrical systems

–EN 60601-1-2 (IEC 60601-1-2)

Medical electrical equipment

Part 1-2: General requirements for safety

Collateral standard: Electromagnetic compatibility; Requirements and tests

14. Accessory equipment connected to the analog and digital interfaces must be in

compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950

for data processing equipment, IEC 60065 for video equipment, IEC 61010-1 for

laboratory equipment, and IEC 60601-1 for medical equipment.) Furthermore, all

configurations shall comply with the system standard IEC 60601-1-1. Everybody who

connects additional equipment to the signal input part or signal output part configures

a medical system, and is therefore, responsible that the system complies with the

requirements of the system standard IEC 60601-1-1. The unit is for exclusive

interconnection with IEC 60601-1 certified equipment in the patient environment and

IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult

the technical services department or your local representative.

Caution! Use suitable mounting apparatus to avoid risk of injury.

15. Use a power cord that matches the voltage of the power outlet, which has been

approved and complies with the safety standard of your particular country.

Note! Environmental protection Follow national requirements to dispose of unit.

Warning! Do not modify this equipment without authorization of the manufacturer.

AID-240SBW Quick Reference Guide

Warning! To avoid risk of electric shock, this equipment must only be connected to a

supply main with protective earth.

Caution! This adapter EDAC EM11013C is a forming part of the medical device.

Explanation of Graphical Symbols

IEC 60878 and ISO 3864-B.3.6 : Warning: dangerous voltage

ISO 7000-0434 : Caution, consult ACCOMPANYING

DOCUMENTS.

ISO 7000-1641 : Follow operating instructions or Consult

instructions for use.

IEC 60417-5031 : Direct current.

Disposing of your old product

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste

electrical and electronic products carrying the mark (left) must be disposed of

separately from normal household waste. This includes monitors and electrical

accessories, such as signal cables or power cords. When you

need to dispose of your display products, please follow the

guidance of your local authority, or ask the shop where you

purchased the product, or if applicable, follow any agreements

made between yourself. The mark on electrical and electronic

products only applies to the

AID-240SBW Quick Reference Guide

Federal Communication Commission Interference Statement

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT

TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from the one the receiver is

connected to.

Consult the dealer or an experienced radio/TV technician for help.

Notice:

(1) A Unshielded-type power cord is required in order to meet FCC emission limits and

also to prevent interference to the nearby radio and television reception. It is

essential that only the supplied power cord by used.

(2) Use only shielded cables to connect I/O devices to this equipment.

(3) Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

AID-240SBW Quick Reference Guide

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

For product available in the USA/Canada market, only channel 1~11 can

be operated. Selection of other channels is not possible. The antenna(s)

used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter. Shielded interface

cables must be used in order to comply with emission limits.

Additional Information and Assistance

Contact your distributor, sales representative for technical support if you need

additional assistance. Please have the following information ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software,

etc.)

A complete description of the problem

The exact wording of any error messages

This equipment is a source of electromagnetic waves. Before use please, make

sure that there are not EMI sensitive devices in its surrounding which may malfunction

therefore.

Environmental protection

Follow national requirements to dispose of unit.

Manufacturer

Avalue Technology Inc.

7F, No.228, Lian Cheng Road, Zhonghe District, New Taipei City, 235, Taiwan

TEL: +886-2-8226-2345

FAX: +886-2-8226-2777

Web: www.avalue.com.tw

AID-240SBW Quick Reference Guide

CONTENT

1. AID-240SBW Multi Touch Panel PC Features........................................10

1.1Specifications..................................................................................11

1.2 Front view........................................................................................13

1.3 Rear & Bottom view........................................................................14

2. Setting Up AID-240SBW Multi Touch Panel PCs...................................15

2.1 VESA Mounting...............................................................................16

2.2 Cabling.............................................................................................18

3. Using AID-240SBW Multi Touch Panel PCs...........................................22

3.1. Turn ON/OFF the System ..............................................................23

3.1.1 Turn ON the System .............................................................23

3.1.2 Turn OFF the System............................................................23

3.2 Using LCD Display and Touch Screen..........................................24

3.2.1 Adjust System Volume .........................................................24

3.2.2 Adjust LCD Display Brightness...........................................24

3.2.3 Using Touch Screen .............................................................24

4. AID-240BSW Disassembly Figure ..........................................................25

4.1 Disassembly Figure........................................................................26

AID-240SBW Quick Reference Guide

1. AID-240SBW Multi Touch Panel PC Features

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

In this chapter, you will get to know all features of our AID-240SBW

Multi Touch Panel PC.

1.1 Specifications

1.2 Front view

1.3 Rear & Bottom view

Indice

Altri manuali Avalue Technology Pannello touch

Avalue Technology

Avalue Technology APC-18W5 Manuale utente

Avalue Technology

Avalue Technology LPC-08A1 Manuale utente

Avalue Technology

Avalue Technology SID-21WR1 Manuale utente

Avalue Technology

Avalue Technology SPC-1507 Manuale utente

Avalue Technology

Avalue Technology APC-2138-B1 Manuale utente

Avalue Technology

Avalue Technology ARC-10W33 Manuale utente

Avalue Technology

Avalue Technology SID-21W03 Manuale utente

Avalue Technology

Avalue Technology LPC-1909 Series Manuale utente

Avalue Technology

Avalue Technology ARC-1535 Manuale utente

Avalue Technology

Avalue Technology ARC-1209 Manuale utente

Avalue Technology

Avalue Technology WG-1201 Manuale utente

Avalue Technology

Avalue Technology SID-10W04 Manuale utente

Avalue Technology

Avalue Technology APC-1733 Manuale utente

Avalue Technology

Avalue Technology ARC-1532-C2 Manuale utente

Avalue Technology

Avalue Technology FPC 17 W Series Manuale utente

Avalue Technology

Avalue Technology LPC-1231 Manuale utente

Avalue Technology

Avalue Technology MPC-OPC12 Manuale utente

Avalue Technology

Avalue Technology VNS-15W01 Manuale utente

Avalue Technology

Avalue Technology ARC-1232 Manuale utente

Avalue Technology

Avalue Technology SID-15V-Z37-A1R Manuale utente

Avalue Technology

Avalue Technology HID-2334 Manuale utente

Avalue Technology

Avalue Technology MPC-21W7 Manuale utente

Avalue Technology

Avalue Technology LPC 10 SERIES Manuale utente

Avalue Technology

Avalue Technology RITY122 Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente