AVer CAM540 Manuale utente



CAM540 Conference Camera

Quick Installation Guide

Package Contents

Camera Remote controller

AAA Batteries

Power Adapter

Power plug* USB Cable

/

L-Mount Bracket Screws for mount Quick Guide Warranty card USB type-A to

type-C adapter



 



*The power plug will vary depending on the standard power outlet of the country where it is sold.

Overview

(1) (2) (4)(3) (5)

(6) (7)



(1) IR sensor (3) RS232 port (5) Reset button (7) Screw hole for mounting

(2) Power port (4) USB port (6) Kensington Lock

P/N: 300AU300-???



Installation

1. Connect the camera to power outlet.

Power cord

2. Connect the camera to the computer.

[Note] If you like to use the type-C connector on

newer PC, connect provided adapter to type-A

end of the cable, then connect type-C side of the

adapter to PC.

3. Install the cable first and secure the

cable.

[Note] Make sure the cable is well connect to

the connector on the camera before secure the

cable

USB cable

Wall Mount Installation

1 2

58mm(2.28”)

97.5mm(3.84”)

4 - Ø5.5mm(Ø0.22”)

3 4



Wall Mount Installation Continue

Celling Mount/ Switch Box Installation

Switch Box



Remote Controller

Camera select

Camera Directional

control

Line In**

SmartFraming

Zoom In/Out

Preset

Call/Answer*

Brightness -

Enter**

Mute/Un-mute**

VolumeUp/Down**

PresetHotkey

PresetPosition

Handup*

Brightness+

Making a Video Call

A computer is required to use this device.

Step 1: Open your video collaboration application such as SkypeTM, Skype for Business, Google

HangoutsTM, ZOOMTM, WebExTM, Adobe ConnectTM,WebRTC, TrueConf, V-Cube, U-meeting,

Ringcentral, BlueJeans, Fuze.

Step 2: Set the CAM540 as your primary camera device in your application (Please consult your

application setup guide for details).

Step 3: Ready to make a video call.

[Note] CAM540 is a Plug-n-Play Conference Camera. The system requires no special drivers. For

advanced setting and firmware update, please download AVer PTZApp.

AAA Batteries (required)

*Function requires AVer PTZApp

**Not support for CAM540

1: If you only have one camera

and don’t need to do any setting,

the default is camera 1.

If you press camera 2 or 3 on

the remote control, you will find

your remote can’t control your

camera. In this case, please

press camera 1 on your remoter

again.



Install AVer PTZApp

Please go to http://www.aver.com/download-center to download the AVer PTZApp. After downloading,

double-click on the file and follow the on-screen instructions to complete the installation.

After installing the AVer PTZApp, double-click on the AVer PTZApp icon to run the application.

Use AVer PTZApp

1. Run your video application.

2. During your video call, you can use the AVer PTZApp to pan, tilt and zoom the camera in/out and

enable/disable the backlight feature, set up camera Home or Sleep mode preset points. For more

details, please refer to the user manual.

3. Smart Framing: The Smart Framing function can auto detects face of people to find the best view

for all meeting participants. Press on the remote for 1 second can switch the Smart framing

function between auto and manual; a message (as figure shown) will display on the screen to

indicate in auto or manual status.

Also, user can change Smart Framing function status

in AVer PTZApp. In AVer PTZApp, select “Settings” >

“Smart Framing” > “Auto/Manual”.

[Note] While in conferencing meeting, participants

must face the camera for face detection (smart

framing). When Smart Framing is detecting, the

screen will display word “Framing” on the left upper

corner.

4. Flip: If the CAM540is installed in the upside down

position, please enable the "Flip" function in the AVer

PTZApp , and the screen will display normally.



5. Hotkey Control: Enable hotkey control to use keyboard control camera’s movement and backlight.

The default is off.

  

When hotkey control is enabled, a hotkey tip will display when mouse is moved to the PTZ control

button in PTZ mode.



If the hotkey function is enabled after installed PTZApp, PTZApp auto launch next time PC reboot.

Therefore, the customer can use all the hotkey commands since PTZApp is auto running in

system tray.



More Help

For FAQs, technical support, software and user manual download, please visit:

http://www.averusa.com

Contact Information

AVer Information Inc.

668 Mission Ct

Fremont, CA 94539

www.averusa.com

Toll-free: 1(877)528-7824

Local: 1(408)263-3828

support.usa@aver.com

Federal Communication Commission Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

Altri manuali per CAM540

Indice

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente

Digitus

Digitus DN-16085-1 Manuale utente