AVPro Edge AC-CXWP-HDMO-BKT Manuale utente
AC-CXWP-HDMO-BKT
Single Gang, HDMI Wall plate
AC-CXWP-HDMO-BKT
Page 1
AC-CXWP-HDMO-BKT
Page 2
Introduction
This basic HDBaseT wall plate transmitter/receiver kit is a cost effective HDMI extension
product from AVPro Edge’s ConferX line of products. Able to handle 4k at 10.2 Gbps, this
single gang wall plate transmitter fits in any standard mud ring and works with standard
category cable to deliver a stable signal long distances. This extender kit is able to send a
4k signal 40 Meters and a 1080p signal 70 meters using CAT6a with HDBaseT technology.
This is the ideal video extension solution for single office settings, home theaters,
conference rooms, huddle spaces and any other place you need to deliver an HDMI single
over a long distance. Perfect for any basic HDMI extension job and able to handle
resolutions from PC’s, Apple products, Tablets, Bluray Players or any other HDMI source
outputting 4K at 30hz.
1) UHD over Category Cable: The length of manufactured HDMI cable is unchangeable after it is made and
they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized
factory environment due to its extremely high frequencies and high density. This does not allow installers
or users to remake or make cables on a DIY basis. CAT-6A cables are available widely and can be reworked
easily by the installer or end-user
NOTE: High Quality CAT6a Shielded or higher required for maximum performance.
2) DISTANCE: By using AC-CXWP-HDMO-KIT, the transmission distance for HD 1080P is 70 meters & 4K is
up to 40 meters.
3) AUTO SENSING: This wall plate is designed to be a "Set it & forget it" piece of hardware. When the user
plugs in their device (BYOD), the wall plate automatically senses the signal and makes it active.
4) POWER: No local power required when you use the AC-EX70-UHD-BR. Power is provided by ultra-
stable PoE technology. Optionally you can power it locally for use with any HDBaseT Receiver.
5) SINGLE GANG: Save space and make a squeaky clean installation with the single gang configuration.
This wall plate fits in more places than ever!
Key benefits of using AC-CXWP-HDMO-BKT:
What's in the box
•AC-CXWP-HDMO-T (Transmitter)
•AC-EX70-UHD-BR (Receiver)
•3.5mm stereo plug to female DB9 for RS-232 to PC
•12V 2APower Supply
•2 Mounting Screws
•Decora Wall Plate Cover (White)
AC-CXWP-HDMO-BKT
Page 3
AC-CXWP-HDMO-BKT
Page 4
Applications:
This unit is designed to work flawlessly with all PC, VESA and traditional
resolutions up to and including 4K 60Hz 4:2:0 8-bit & HDR 4:2:2 12 BIT. VGA supports
DCI 2K, 1080P, 1920x1200x60. In addition to its compact and robust design, it
transmits the digital signal up to 70 meters (230’) giving you ultimate flexibility,
especially in large rooms like libraries or auditorium style rooms/classrooms. For a
complete solution pair new wall plate transmitter (AC-CXWP-HDMO-T) with
the AC-EX70-UHD-BR HDBaseT Receiver to power the wall plate transmitter from
afar using PoE, thus eliminating the need for a power supply unit near the wall plate.
Optional 5V
Local Power
(MINI USB)
HDBaseT IN
(RJ45) &
Status Lights
Power Light
Link Light
Active Light
HDMI Input
AC-CXWP-HDMO-BKT
Page 5
Single Gang wall plate transmitter and No Compromises
■
Features
•HDMI 2.0 Input
•4K 30 4:4:4, 4K60 4:2:0 HDMI Support
•HDR 4:2:2 12 Bit Support
•HDCP 2.2 & Earlier Supported
•70M (230ft) on 1080P, Up to 40m (131ft) on 4K (Cat6a)
•No Local Power Necessary (Powered by AC-EX70-UHD-BR)
•Single Gang, Low heat, Straight in rear RJ45 receptacle design.
•Rugged, long-life chassis
•Plug & Play auto input sensing
•Designed for the conference/classroom room so your customer
can focus on their meetings, not their video system.
•Single UTP/STP LAN cable (CAT-6A/7) for all signals
•ESD protection circuitry (Inputs / Outputs) till 7KV.
•Single Gang Construction (Fits Decora Type USA single gang
boxes and mud rings)
•Compatible with HDBaseT displays, projectors, AVR's
•Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS,
Dolby TrueHD, DTS HD-Master Audio, Atmos.
•Can Cascade for ultra-long distance
AC-CXWP-HDMO-BKT
Page 6
■
Powering the AC-CXWP-HDMO-T
There are 2 ways to power the unit:
1. Use a HDBaseT Receiver that provides up stream power. This kit comes with the
AC-EX70-UHD-BR.
2. If you will be using the unit directly into a NON PoE Provider (AVR, Projector,
Display, or other HDBaseT receiver), you can power it using a 5V MINI USB Type
power supply. We recommend the AC-PSU-5V-MINI-USB
*NOTE: In these diagrams, arrows indicate the flow of POWER, not other signals.
Tx
OPTION 1: PoE From Receiver (AC-EX100-UHD-R3)
OPTION 2: Local power to work with other HDBaseT devices
HDBaseT Compatible Projector
CAT6/7 for
Audio & Video
Signals
Rx
AC-CXWP-HDMO-BKT
Page 7
■
Mounting Options
The AC-CXWP-HDMO-T has seemingly limitless mounting options. While it
comes with the metal bracket to affix it to any Single or multi-gang Decora
wall plate. The unique design with "Straight In" CAT RJ45 receptacle allows
for unique mounting positions and low heat allows for side by side
configurations. The 3 primary mounting concepts are here, with photos on
the next page.
1. In a single-gang wall plate configuration
2. In a side-by-side configuration (dual-gang, quad gang, etc...)
3. Without the metal bracket, Velcro can easily be used for under table
mounts, difficult positions etc..
*See the following page for mounting options!
To mount to a Decora wall
plate you must install the
metal bracket (Pictured Left)
To install the bracket:
1. Slide the metal bracket
into place.
2. Use the 4 provided
screws to fix the top and
bottom into place
After Bracket is installed it should look like these photos:
Bracket
Mounting
Holes
AC-CXWP-HDMO-BKT
Page 8
Desk: This compact design allows you to mount under tables,
desks, student labs or anywhere you want.
■
Sample Mounting Options
Multiple units: Due to the low heat design & straight in RJ45
receptacle, you can position up to 4 units together in a single wall box
or mud ring. Allowing you to manage multiple display zones in a large
hall, or you can route the signals to a matrix for even more control.
AC-CXWP-HDMO-BKT
Page 9
■
Sample Mounting Options
Podium: Mount in a podium or desk for convenient content sharing
from the instructor/presenter.
AC-CXWP-HDMO-BKT
Page 10
Notice
AVProEdge reserves all the right to make changes in the hardware,
packaging and any accompanying documentation without prior written notice.
Warning
To reduce the risk of fire, electric shock or product damage:
Basic 6. Clean this device with
a dry cloth only.
1. Do not expose this device to
rain, moisture, dripping or
splashing and ensure that no
objects filled with liquids are
placed on or near the devices.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. T
o prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this device
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.
AC-CXWP-HDMO-T
Page 12
Indice
Altri manuali AVPro Edge Trasmettitore
AVPro Edge
AVPro Edge AC-EX100TT-UHD-T Manuale utente
AVPro Edge
AVPro Edge AC-CXWP-USBC-T Manuale utente
AVPro Edge
AVPro Edge AC-EX40-444-KIT Manuale utente
AVPro Edge
AVPro Edge ConferX AC-CXWP-HDMO-T Manuale utente
AVPro Edge
AVPro Edge AC-AEX-KIT Manuale utente
AVPro Edge
AVPro Edge AC-CXWP-VGA-T Manuale utente
AVPro Edge
AVPro Edge AC-CXWP-HDMO-T Manuale utente
