AXEM Technology S-8800 Manuale utente
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
1/27
S-8800, M-2900
User guide
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
2/27
Table des matières
1Historique .......................................................................................Erreur ! Signet non défini.
2S-8600 view.............................................................................................................................5
1-1: Front View............................................................................................................................5
1-2: Back View ............................................................................................................................5
1-3: Side View .............................................................................................................................5
3Reader Configurations .............................................................................................................6
3.1 Initial Use..........................................................................................................................6
3.1.1 Step 1: Powering the Reader .....................................................................................6
3.1.2 Step 2: Connecting Antenna(s) to Reader.................................................................. 6
3.1.3 Step 3: Connecting Data Line to Reader....................................................................7
3.1.4 Step 4: Operating Reader via Demo ..........................................................................8
3.2 Setting RF Parameter ..................................................................................................... 10
3.2.1 Setting RF Output Power ......................................................................................... 10
3.2.2 Setting RF Spectrum ............................................................................................... 11
3.2.3 Antenna Connection Detector .................................................................................. 11
3.2.4Measure RF Port Return Loss ................................................................................. 12
3.3 ISO-18000-6C tag inventory ........................................................................................... 12
3.3.1 Real Time Mode & Buffer Mode............................................................................... 12
3.3.2 Fast Switching Antenna to Inventory Tags ............................................................... 15
3.4 Accessing ISO-18000-6C Tag ........................................................................................ 16
3.4.1 Read tags ................................................................................................................ 16
3.4.2 Write Tags ...............................................................................................................17
3.4.3 Lock Tags ................................................................................................................ 17
3.4.4 Kill Tags...................................................................................................................18
3.4.5 Tag Selection........................................................................................................... 18
3.4.6 Error Display Might Be Returned ............................................................................. 19
3.5 Accessing & Inventorying ISO-18000-6B Tag ................................................................. 20
3.5.1 ISO-18000-6B Tag Inventory ................................................................................... 20
3.5.2 Accessing to ISO-18000-6B Tag.............................................................................. 21
3.6Other Settings.................................................................................................................22
3.6.1 Set DRM Status....................................................................................................... 22
3.6.2 Operating Temperature Monitoring .......................................................................... 23
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
3/27
3.6.3 Set GPIO Level........................................................................................................ 23
3.6.4 Setting Buzzer Status .............................................................................................. 25
3.6.5 Charging The Serial Communication Baud Rate...................................................... 26
4Develop your own RFID Application....................................................................................... 27
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
4/27
1Background
Description
Date
Version
Author
Auditor
First parution
17/05/2019
V1.0
CLO
YDA, ACA
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
5/27
2S-8600 view
1-1: Front View
1-2: Back View
1-3: Side View
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
6/27
3Reader Configurations
3.1 Initial Use
3.1.1 Step 1: Powering the Reader
Plug the power cable in, with the indicator light on and sound of a short beep, reader is ready. As
illustrated below:
3.1.2 Step 2: Connecting Antenna(s) to Reader
Connect the antenna(s) with the antenna port as illustrated below:
Access up to 4 antennas, as illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
7/27
3.1.3
Step 3: Connecting Data Line to Reader
Method NO.1: You can connect the reader to your PC via RS-232 serial port, as illustrated below:
Next, please switch the DIP to the position as illustrated below:
Method NO.2: You can also connect the reader to your PC via TCP/IP, as illustrated below:
Next, please switch the DIP to the position as illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
8/27
DIP Switch：
①：EN, ON Status, EN is low level.
②：GPIO1, ON Status, GPIO1 is low level.
③④：TCP/IP, ON Status is TCP/IP communication.
⑤⑥：Blank.
⑦⑧：RS232, ON Status is RS232 communication.
3.1.4
Step 4: Operating Reader via Demo
Put the UHFDemo.exe, reader.dll, customControl.dll into the same folder, and double-click
UHFDemo.exe to run the software.
1. Open the software and it will shows as below:
2. Please select RS232 as Connection if the reader is connected via RS -232 port. Choose the
corresponding Serial Port and Baudrate(default baudrate is 115200). As illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
9/27
3. Click Connect, if it succeeds, the Operation History will display as below:
If the reader is connected via TCP/IP, please follow those steps:
•Ensure that an Ethernet Card has been installed in the PC.
•Ensure that PC and reader in the same network segment.
1. Default settings when connected via TCP/IP as follows:
•IP addresses: 192.168.0.178
•Net mask: 255.255.255.0
•Port No.: 4001
For more TCP / IP configuration details, please defer to the document supplied:\ tcpip configuration
\ IPORT-1UM.PDF
2. Click Connect, if it is connected successfully, the Operation history will display as below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
10/27
Text communication with the reader:
Click on Get in Firmware Version or in Reader Identifier, the following screen displays:
Now the reader has been connected to PC successfully.
3.2 Setting RF Parameter
After connecting the reader with PC, we need to set some basic RF parameters: RF Output Power
& RF Spectrum. Please select RF Setup as illustrated below:
3.2.1
Setting RF Output Power
RF Output Power is the strength of RF output signal from antenna port whose unit is dBm.
The output power range is 0 - 33dBm. When this setting completes, it will be saved in the reader
automatically even if the power is cut off. Our default output power is 30dBm (1W).
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali AXEM Technology Sistema RFID
AXEM Technology
AXEM Technology Atid AT188N Manuale utente
AXEM Technology
AXEM Technology AX'Up wire Manuale utente
AXEM Technology
AXEM Technology D-10 Series Manuale utente
AXEM Technology
AXEM Technology S-8600 Manuale utente
AXEM Technology
AXEM Technology Eagle Manuale utente
AXEM Technology
AXEM Technology Atid AT188N Manuale utente
AXEM Technology
AXEM Technology UniSled Manuale utente
