Axicon 6025-S Manuale dell'operatore

- 1 -

AXICON

LINEAR BARCODE VERIFIERS

Models: 6025-S, 6525-S, 7025-S

DOCUMENTATION BOOKLET

www.axicon.com

- 2 -

This page is intentionally blank.

- 3 -

CONTENTS

Page

AXICON VERIFIER CERTIFICATION 5

START UP GUIDE

Introduction 6

Important Information 7

What’s in the transit case 7

Software Installation for Windows (all versions) 8

Hardware installation for Windows 9

Holding the Verifier 13

User Calibration 14

The “Continuous scan” mode 16

Getting started with the Axicon verifier 17

Configuring the Axicon Verifier 21

AXICON SOFTWARE LICENCE AGREEMENT 26

AXICON WARRANTY AND SERVICE CONTRACT 24

Warranty on all Products 29

Service Contract 30

VERIFIER SERVICING & FACTORY RECALIBRATION (VCAS)

Why CCD based verifiers require factory recalibration 31

Axicon Factory Recalibration Service (VCAS) 33

Other faults or damage 34

Equipment Rental Scheme 34

VCAS RECORD 36

- 4 -

This page is intentionally blank

- 5 -

Conformance Certification

We Axicon Auto ID Ltd

of Church Road, Weston on the Green, Oxfordshire, OX25 3QP, UK

Declare under our sole responsibility that the product has been designed and

manufactured at our address in the U.K. to perform verification of barcode quality in

accordance with the following standards:

ANSI X3. 182 ISO/IEC 15416 ISO/IEC 15420 ISO/IEC 16388

ISO/IEC 16390 ISO/IEC 15417 ISO/IEC 24724

We further declare that the verifier has been designed and manufactured to ensure

conformance to Primary Reference Test Symbols available from N.I.S.T. and

Traceable Reflectance Standards available from N.P.L. in accordance with ISO/IEC

15426-1.

Tolerances: Decodability: ±8%

Rmin: ±3%

Rmax: ±5%

Defect: ±8%

Modulation: ±12%

We also certify that this equipment conforms to the following standards:-

Barcoding: ISO/IEC 15426-1 VERIFIER CONFORMANCE STANDARD

European Safety EN 60950

Electromagnetic Compatibility EN 55022 & EN 55024

We also certify that the standards EN 60825 is not applicable to the product.

This equipment meets the requirements of the directives 2004/108/EC (Electromagnetic

Compatibility), 2006/95/EC (Low Voltage), based on our own relevant test reports.

Axicon Auto ID Ltd also certifies that this equipment, when used in conjunction with the

latest verifier software has all of the features required to meet the 21CFR Part 11 standard.

We also certify that this verifier uses solid-state technology (no moving parts) and LEDs for

the illumination of the barcode. It does not use a laser and consequently there are none of

the usual health and safety risks associated with the use of lasers.

Church Road, Weston on the Green, Oxfordshire, OX25 3

P, UK

Tel: +44

(

)

1869 351155 / Fax: +44

(

)

1869 351205 / [email protected]

INTRODUCTION

Thank you for purchasing an Axicon Verifier. This short guide will enable

you to get started with your Axicon Verifier quickly and easily.

There is also an on-screen help facility available to users embedded

within the software.

Axicon has developed a number of “Feature Sheets” to describe how to

implement particular features of the Axicon Verification system and these

are available to download from our website www.axicon.com

The Axicon Verifier is designed to work with any PC running a version of

Microsoft Windows currently supported by Microsoft (also some earlier

versions may also be supported but cannot be guaranteed – see notes).

- 7 -

IMPORTANT INFORMATION

1. Your Axicon verifier is a piece of high precision quality control

equipment and should be handled with due care.

2. Please retain the plastic transit case. It will protect the equipment in

transit.

3. Only use power and data cables supplied by Axicon. Use of non-

approved accessories will invalidate the warranty.

4. If the verifier is dropped (or subjected to similar misuse) the accuracy

of the results may be affected. The unit should be returned to Axicon

immediately for servicing.

5. Axicon recommends that the verifier is factory recalibrated annually.

The unit should be returned to Axicon or to your approved Axicon

reseller for this check to be performed.

6. As the owner of an Axicon Verifier you are entitled to free software

updates for life. The latest copy of the software is always posted on

our website (www.axicon.com)

7. Subject to the terms of the license you are permitted to make

additional copies of the Axicon Verifier software.

WHAT’S IN THE TRANSIT CASE?

Please ensure that the following items are present upon receipt.

One of the following verifiers and the relevant cables:

• Axicon 6000 Series – CCD verifier with USB cable attached.

• Axicon 6500 Series – CCD verifier with USB cable attached.

• Axicon 7000 Series – CCD verifier with USB cable attached.

• Software CD.

• Wallet containing Documentation Booklet (includes Start Up Guide)

and Calibration Sheet

- 8 -

SOFTWARE INSTALLATION –

- WINDOWS (ALL CURRENT VERSIONS)

1. Insert the CD into the CD drive

2. The Install Program should now start automatically. (If not, open the

CD using Windows Explorer and double-click the Autorun Program.)

3. Click “Install Axicon Verifier”

4. Follow the on-screen installation instructions for the next four

windows (Select a language, Welcome, Software License Agreement

and choose destination location) until you get to the “Select

Components to install” window.

5. At the “Select Components to Install” screen ensure that the boxes

relating to “Drivers” and “Main Program” are both ticked. (If it is

intended that this verifier should be used as part of an Online

verification system then the “Online Verifier” software should also

be installed at this stage by ticking the appropriate box, otherwise it

should be left unticked).

6. If you have purchased password-protected features you should click

the check box next to the relevant item and then click “Next”.

7. Click “Next” again to pass the “Select folder in start menu” window

8. If you have selected any password-protected features you will be

prompted to enter your serial number and passwords now. The

description appears in bold for the features you have chosen to

install and the passwords are at the front of this booklet.

If you have more than one verifier with password protected features

you should enter the serial number and passwords for the first unit,

then click “Enter Another” to enter the serial number and passwords

for the additional verifiers.

Click on “Next”

9. The software will now be installed.

10. Leave the software CD in the PC in order to install the USB drivers.

- 9 -

HARDWARE INSTALLATION FOR WINDOWS

LOADING USB DRIVERS

1. Plug the verifier into any available USB2 or USB3 port directly on the

computer. (Please note that the Axicon “S” range verifiers will not

work with a USB1 port).

2. For Windows 7 and Windows 8 installations the drivers should be

installed automatically.

After installation is completed you will find the “Axicon Verifier”

directory in “Start Menu/Programs” and a shortcut to the program on

your desktop.

• Double clicking the Axicon Verifier shortcut icon will now start the

software.

• Two windows will open: the Command window and the Summary

window.

• The LED array of your CCD should now be lit and the text in the

bottom right hand corner of the Command window should read “Ready

to scan”. If not, refer to the troubleshooting section of the manual on

the CD.

- 10 -

INSTALLATION FOR EARLIER VERSIONS OF WINDOWS AND

WHEN MANUAL INSTALLATION OF DRIVERS IS REQUIRED.

LOADING USB DRIVERS.

Note: When using much older (and Microsoft-Unsupported) versions of

Windows you may need to install the older version of the USB drivers.

These are available from Axicon on request.

Manual installation/Updating of the USB drivers (if required)

This section provides some guidance to users of the Axicon Verifiers who

need to update the USB drivers.

Firstly install the Axicon Verifier software (version 2.0.25.1 or later – note

that it is always possible to download the latest software from our

website).

As part of the software installation, the USB driver files will have been

copied to the folder that was chosen for the installation.

Connect the verifier and wait for the Hardware Wizard to start, or

initiate the Hardware Wizard from the Device Manager.

The following screen will appear for computers running Windows XP.

Select the option 'No' on this screen and then click the Next button.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Axicon Lettore di codici a barre

Axicon

Axicon 6525-S Manuale utente

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon 12000 Manuale utente

Axicon

Axicon 6000 series Manuale utente

Axicon

Axicon 6015 Manuale dell'operatore

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon 6000-W Manuale utente

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon 6000 series Manuale utente

Axicon

Axicon 12000 Manuale dell'operatore

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon PV-1000 Manuale utente

Axicon

Axicon 12500 2D VERIFIER Manuale utente

Axicon

Axicon 12600 Manuale dell'operatore

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente