Axicon PV-1000 Manuale utente

THE BARCODE EXPERTS

Church Road, Weston on the Green, Oxfordshire, OX25 3QP, UK

Tel: +44 (0)1869 351155 | Email: [email protected]

Web: www.axicon.com

operating manual

Axicon PV-1000

portable display unit

Industry

Partner

Page 2 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Page 3 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Contents

Important Information 4

Introduction 5

Getting started 6

Calibration 7

Using the PV-1000 8

Conguration set-up 11

ISO/IEC or ANSI grades 13

Menu screen formats 14

Frequently asked questions 15

Technical specications 17

Software licence agreement 18

Axicon warranty 20

Declaration of ISO/IEC 21

Declaration of CE 23

Page 4 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Important information

The Axicon PV-1000 portable display unit is designed to operate in conjunction with

any of the Axicon 6000, 6500 or 7000 series veriers. Please note that the Axicon

PV-1000 cannot be used in conjunction with any of the Axicon S range veriers.

An Axicon verier is a high-precision quality control measuring device and should be

handled with care.

Only use accessories supplied or approved by Axicon. Use of non-approved

accessories will invalidate the warranty.

If the verier read-head is dropped (or subjected to similar misuse) the accuracy of

the results may be aected. The unit should be returned to Axicon immediately for

servicing.

Axicon recommends that for optimum accuracy all verier read-heads should be

returned every year to Axicon or an approved reseller to be factory recalibrated.

Any attempt to dismantle the equipment or any Axicon verier read-head will

immediately invalidate the warranty. This equipment contains no user-serviceable

parts.

Page 5 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Introduction

What is in the case.

The PV-1000 ISO/ANSI portable display unit.

Documentation wallet containing the operating manual.

A set of four AA-sized alkaline batteries (supplied in UK only).

Page 6 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Getting started

Open the battery housing cover to check if the four AA-sized batteries have been

tted. Observe the correct polarity when inserting the batteries. Ensure their

output is at least 2500 mAh.

Plug in an Axicon 6000, 6500 or 7000 series verier to the USB port on the base of

the PV-1000.

Switch on the verier by pressing the on/o switch.

A light will come on but nothing will be displayed on the screen for about 15

seconds. This is the power-up and initialisation phase.

The PV-1000 will show an initialising message before showing the message:

Axicon Verier

Ready to Scan !

If the PV-1000 is left for some time the screen will go blank to conserve battery

power, but can quickly be restarted by pressing the on/o button again. The time-

out period before this happens can be adjusted to suit the requirements of the user

– see page 12.

Please note that a warning message will be shown if a particular verier read-head

has not previously been calibrated on the PV-1000 (Each read-head has its own

serial number, and it must be calibrated before use).

Page 7 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

The calibration card is supplied with the PV-1000 and is kept in the wallet.

With the Ready to Scan message showing on the screen,

Press the Menu/select key.

And the screen will show ► Information

Press the Scroll down button until the screen displays

► Calibrate

Press the Menu/Select Button

There will be a ♦ Set RMin message with a 5below. Look at your calibration card to

nd the value for RMin.

Press Menu/Select and you can adjust the gure shown (if necessary) by using the

Scroll up and Scroll down buttons. When the numbers match, press Menu/Select to

conrm the setting. Press the Scroll down button again and the screen will display

♦Set RMax message with a 85 below.

Look at your calibration card to nd the value for RMax. Press Menu/Select and

you can change the value by using the Scroll up and Scroll down buttons until it

matches the value shown on the calibration card. Press Menu/Select to conrm the

setting. Press the Scroll down button and the message will be displayed ♦Calibrate

press the Menu/Select button.

The message will be displayed

Calibrate

Cal. Scan (0/3)

Pick up the verier read-head, place it over the barcode on the calibration card in

such a way that all four corners of the read-head are touching the card and then

press the trigger on the read-head. The message will change to read Cal. Scan

(1/3). Press the trigger two more times and the display will rst read Cal. Scan

(2/3) and then Calibration Successful !

Press the Clear/Back button twice to see the message

Axicon Verier Ready to scan

Calibration

Page 8 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Place the verier read-head over the barcode so that it is at against the barcode

and then press the trigger on the read-head.

The initial screen will show the decoded number followed by the overall print

quality grade and a detail of the scan number in the format:

5012345678900

4.0/06/660 Scan 1/3

Using the Scroll down button you can look at further information regarding the

quality of the barcode, the symbology, magnication, bar gain (ink spread) etc.

Using the Scroll up button reviews the data.

Use the Clear/Back button to get ready to scan the next barcode.

Multi-scan averaging

The PV-1000 allows you to take up to 10 scans of a barcode at dierent points

throughout the height of the barcode which will be averaged automatically to grade

the barcode. This is the process dened by ISO/IEC 15416. To do this simply use the

Menu/Select button and you will see the message ►Information

Use the Scroll Down button until you see the message ►Setup

Press the Menu/Select button and you will see:

♦Average No 3

Press the Menu/Select button and then use the Scroll up and Scroll down buttons

until you reach the desired number.

Press the Menu/Select button to store this scan number.

Press the Clear/Back button twice to return to the main menu.

When multiple scans of a barcode have been taken then the Previous Scan button

allows you to review all of the previous scans for that barcode.

Using the PV-1000

Page 9 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Print / Save Facilities

Verication reports can be printed by the PV-1000, or saved to memory for

subsequent uploading or printing. Automatic saving facilities are also included

as an option, and the les are saved in two formats. The rst is a text-le, and

the second is the Axicon .scn format. This second format can be viewed using the

Axicon PC verier software.

Direct Printing

Attach a suitable printer to the printer

port on the verier using the optional

Axicon printer lead. Verify the barcode.

Press the Print button – the screen will

show ♦Print. Press the Menu/Select

button – The screen will display the

message Printing and shortly afterwards

the message Done. Press the Clear/Back

button to return to the main screen.

Please note that this is a unidirectional

signal transfer – if the printer is not

connected properly or not switched on

then the PV-1000 is not aware of this.

Manual saving of verication reports

Verify the barcode.

Press the Print button – the screen will show ♦Print

Press the Scroll down button and the screen will show ♦Save

Press the Menu/Select button – The screen will display the message Successful!

Press the Clear/Back button to return to the main screen.

Page 10 of 24

Axicon Auto ID Limited | PV-1000 operating manual | January 2022

www.axicon.com

Automatic saving of verication reports

From the main screen press the Menu/Select button and you will see the message

►Information

Use the Scroll Down button until ► Setup is displayed.

Press Menu/Select

Press the Scroll Down button until the screen displays the message

►Autosave is displayed with an OFF message

Press the Menu/Select button.

Use the Scroll up and Scroll Down buttons until the desired On or O is displayed.

Press Menu/Select

Press Clear/Back twice to move back to the main screen.

To print saved scans

Unplug the verier read-head from the PV-1000, and plug in a USB memory device.

From the main screen press the Menu/Select button and you will see the message

►Information

Press Menu/Select and the screen will display ♦Show Code

Press Scroll down until the message ♦Transfer is displayed.

Press Menu/Select

The message ♦Transferring will be displayed followed by the message ♦Transfer

Successful.

The text le printout will be in a directory named Scans on the memory device. This

le can then be opened in any suitable program such as Microsoft Word or Windows

Notepad for subsequent printing.

This Scans le also contains the detailed verication reports (the .scn les) that

have been saved. These les may be uploaded to a PC and viewed using the Axicon

PC verier software. Data from these les may also be merged into a quality

management document using the Axicon Scan File Data Extractor plugin.

Using the PV-1000

Indice

Altri manuali Axicon Lettore di codici a barre

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon 6000-W Manuale utente

Axicon

Axicon 6000 series Manuale utente

Axicon

Axicon 12000 Manuale dell'operatore

Axicon

Axicon 12500 2D VERIFIER Manuale utente

Axicon

Axicon 12600 Manuale dell'operatore

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon 6525-S Manuale utente

Axicon

Axicon 6025-S Manuale dell'operatore

Axicon

Axicon 12000 Manuale utente

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon PV-1072 Manuale utente

Axicon

Axicon 15000 series Manuale utente

Axicon

Axicon 6015 Manuale dell'operatore

Axicon

Axicon 6000 series Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente