Balluff BNI006A Manuale utente

AOI_BNI006A_50_31_040

Add-On Instruction

User Guide

December 2, 2013

Balluff Inc.

8125 Holton Drive

Florence, KY 41042

1-800-543-8390

www.balluff.com

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 2 of 26

Table of Contents

1.0 Scope.....................................................................................................................................................3

2.0 Products................................................................................................................................................3

3.0 Instructions...........................................................................................................................................4

4.0 User-Defined Data Type (UDT)...........................................................................................................11

5.0 Software Validation.............................................................................................................................17

6.0 Troubleshooting Tips .........................................................................................................................22

7.0 Definitions...........................................................................................................................................24

8.0 Related Documents ............................................................................................................................26

9.0 References ..........................................................................................................................................26

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 3 of 26

1.0 Scope

1.1 This User Guide describes the installation, use and maintenance of the Add On Instruction (AOI)

software module for the BNI EIP-502-105-Z015. This software module is designed for use with

RSLogix5000.

2.0 Products

2.1 This guide was developed for use with the software module AOI_BNI004A_40_27_041.L5X. This

software module is available for download at the web site www.Balluff.com/AOI.

2.2 This software module was developed for use with the Balluff EtherNet/IP Connectivity block BNI EIP-

508-105-Z015 (hardware version 5.0, firmware version 3.1).

2.3 For the development of this software module and hardware configuration, the following system

components were used and validated:

2.3.1 RSLogix5000, version 18.01 (or later)

2.3.2 Rockwell 1756-L63 controller

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 4 of 26

3.0 Instructions

3.1 This section describes the process for installing and using the AOI module. This is a three step

process that must be followed sequentially: hardware configuration; import AOI module along with all

associated UDTs; and create new ladder logic with AOI modules.

3.2 Hardware Configuration

3.2.1 Balluff EtherNet/IP IO-Link Master Features

Link Ports

Pin 2 – Free

Configurable

Pin 4 –Manually

Configured

•IO-Link

•Input/Output

Embedded

Ethernet

Switch

New

Display

Dual Aux

Power

Ports

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 5 of 26

3.2.2 Configuring the BNI EIP-508-105-Z015 in RSLogix5000

3.2.2.1

Establish 1756-ENxx communication module in I/O Configuration

3.2.2.2

Right click 1756-ENxx and choose New Module:

3.2.2.3

Choose ETHERNET MODULE – Generic Ethernet Module:

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 6 of 26

3.2.2.4

Establish properties of BNI EIP-508-105-Z015:

Comm. Format: Data – SINT

Input Size: 392 bytes Assembly Instance: 100

Output Size: 262 bytes Assembly Instance: 101

Configuration Size: 194 bytes Assembly Instance: 102

5.2.2.5

Depending on the application and network design, verify whether a Unicast connection is

required:

When checked the PLC will establish a Unicast

connection rather than a Multicast connection

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 7 of 26

3.3 Import AOI

3.3.1 Right click on the Add-On Instructions element of the Controller Organizer to view a menu that

includes “Import Add-On Instruction…” as shown below:

Locate your folder containing the downloaded Balluff AOI modules, highlight

AOI_BNI006A_50_31_040.L5X and click Import…

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 8 of 26

3.3.2 If the operation is successful, all UDTs associated with the AOI module will be imported into the

project along with the AOI. This can be verified by checking the User-Defined element under

Data Types in the Controller Organizer.

3.4 Create logic using RSLogix5000

3.4.1 Once an AOI has been imported, it can be used in the same manner as other ladder

instructions. A new Element Group tab will be displayed in RSLogix5000’s Language Element

toolbar. This is shown here with the hover window information displayed:

Add-On Instruction

User-Defined Data Types

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 9 of 26

3.4.2 The AOI module can now be added to a rung of ladder:

3.4.3 All parameters must be defined with tags of valid data type as defined by the AOI module. The

user should create each Tag Name relevant to the user’s project.

Parameter Name Description Data Type Tag Name

(User specific)

AOI_BNI006A_50_31_040 Unique Control Tag for

AOI Module AOI_BNI006A_50_31_040 Master_Control_Tag

BNI_EIP_508_Raw_Input Data 392 byte array of raw

data from Hardware

Module Defined Tags SINT[392] Module_Name.I.Data

BNI_EIP_508_Raw_Output Data 262 byte array of raw

data from Hardware

Module Defined Tags SINT[262] Module_Name.I.Data

BNI_EIP_508_Raw_Config_Data 194 byte array of raw

datafrom Hardware

Module Defined Tags SINT[194] Module_Name.I.Data

BNI_EIP_508_Port_1_Data All I/O Data Associated

with IO-Link Port 1 IO_Link_Port_Data Port1_Data

BNI_EIP_508_Port_2_Data All I/O Data Associated

with IO-Link Port 2 IO_Link_Port_Data Port2_Data

BNI_EIP_508_Port_3_Data All I/O Data Associated

with IO-Link Port 3 IO_Link_Port_Data Port3_Data

BNI_EIP_508_Port_4_Data All I/O Data Associated

with IO-Link Port 4 IO_Link_Port_Data Port4_Data

BNI_EIP_508_Port_5_Data All I/O Data Associated

with IO-Link Port 5 IO_Link_Port_Data Port5_Data

(800) 543-8390 FAX (859) 727-8506 www.balluff.com

AOI_BNI006A_50_31_040 User Guide Page 10 of 26

BNI_EIP_508_Port_6_Data All I/O Data Associated

with IO-Link Port 6 IO_Link_Port_Data Port6_Data

BNI_EIP_508_Port_7_Data All I/O Data Associated

with IO-Link Port 7 IO_Link_Port_Data Port7_Data

BNI_EIP_508_Port_8_Data All I/O Data Associated

with IO-Link Port 8 IO_Link_Port_Data Port8_Data

Mapped_BNI_EIP_508_Data All Unique data

associated with BNI

EIP-508 module UDT_BNI006A_50_31_040

Mapped_Master_Data

Note that in this example, Module_Name has been defined in the I/O Configuration Tree as

Balluff_IO_Link_Master.

Indice

Altri manuali Balluff Unità di controllo

Balluff

Balluff BNI PNT-502-102-Z015 Manuale utente

Balluff

Balluff BNI PBS-202-000-Z001 Supplemento

Balluff

Balluff BNI IOL-252-000-Z013 Manuale utente

Balluff

Balluff BNI ECT-508-105-Z015 Manuale utente

Balluff

Balluff BNI PBS-507-001-Z011 Manuale utente

Balluff

Balluff BNI EIP-104-105-Z015 Manuale utente

Balluff

Balluff BNI ECT-507-005-Z040 Manuale utente

Balluff

Balluff BNI EIP-50 105-Z015 Series Manuale di istruzioni

Balluff

Balluff Micropulse BTL5 Series Manuale utente

Balluff

Balluff BNI EIP-306-100-Z010 Manuale utente

Balluff

Balluff MICROPULSE BTM-AR2-001 Manuale utente

Balluff

Balluff BIS V-6111 series Manuale elenco delle parti

Balluff

Balluff BNI EIP-502-105-R015 Manuale utente

Balluff

Balluff BNI EIP-502-105-Z015 Manuale utente

Balluff

Balluff BNI PNT-508-105-Z031-002 Manuale utente

Balluff

Balluff BNI EIP-508-005-E002 Manuale utente

Balluff

Balluff BNI IOL-302-S02-Z012-C11 Manuale utente

Balluff

Balluff BNI EIP-508-105-Z067 Manuale utente

Balluff

Balluff BNI PNT-508-005-E002 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente