Basler DaA2500-60mc-SD820-DB8 Manuale utente

QUICK INSTALL GUIDE

BASLER EMBEDDED VISION KIT

daA2500-60mc-SD820-DB8

Basler AG

An der Strusbek 60–62

22926 Ahrensburg

Germany

All material in this publication is subject to change without notice and is

TABLE OF CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Target Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

General Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DELIVERED PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

HARDWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview of the Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing the Embedded Vision Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

ACQUIRING YOUR FIRST IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

NEXT STEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Developer Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TABLE OF CONTENTS

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Processing Board Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Mezzanine Board Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Block Diagram of the Mezzanine Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DISCLAIMER AND LICENSING INFORMATION . . . . . . . . . . . . . . . . . . . . . 19

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Software Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

INTRODUCTION

About this Document

This document provides information about how to install the daA2500-

60mc-SD820-DB8 Embedded Vision Kit. It also provides step-by-step

instructions that help you acquire your first images with the included Basler

dart BCON for MIPI camera.

Target Audience

The daA2500-60mc-SD820-DB8 Embedded Vision Kit is aimed at

experienced hardware and software engineers proficient in electronics,

software development, and embedded system design.

This document is written for a target audience that has intermediate to

advanced technical skills in the areas mentioned above.

The document assumes that users have experience in the following areas:

System on Chip (SoC) or System on Module (SoM) architectures

Embedded Linux operating systems

SAFETY INSTRUCTIONS

General Safety Notices

DANGER

Electric Shock Hazard: Unapproved power supplies may cause electric

shock. Serious injury or death may occur.

Only use the power supply delivered with the Embedded Vision Kit. Do not

use other power supplies.

WARNING

Fire Hazard: Unapproved power supplies may cause fire and burns.

Only use the power supply delivered with the Embedded Vision Kit. Do not

use other power supplies.

NOTICE

Damage Hazard: Electrostatic discharge (ESD) can damage the

components of the Embedded Vision Kit.

Use anti-static clothes and materials, e.g., conductive shoes, anti-static

gloves, and ESD protection wrist straps to decrease the risk of

electrostatic discharge.

Control the humidity in your environment. Low humidity can cause ESD

problems.

NOTICE

SAFETY INSTRUCTIONS

Radio Interference Hazard: This is a Class A product. In residential

environments, this product may cause radio interference, in which case the

user may be required to take adequate measures.

Observe the following items:

Do not modify the hardware components in any way. Do not remove

parts from the board or solder in new parts.

Do not allow, e.g., liquid, flammable, or metallic material to get in

contact with the boards.

Read the documentation carefully before using the Embedded Vision

Kit.

For safety instructions related to the operation of the Basler dart BCON

for MIPI camera, refer to the Basler Product Documentation available at

docs.baslerweb.com.

SAFETY INSTRUCTIONS

Environmental Requirements

This Embedded Vision Kit is intended for indoor use at normal room

temperature only.

If you operate the Embedded Vision Kit at elevated temperatures or at high

load, Basler recommends providing additional cooling, e.g., by installing a

fan.

For specific environmental requirements of the components, refer to the

Basler Product Documentation available at docs.baslerweb.com.

DELIVERED PARTS

The daA2500-60mc-SD820-DB8 Embedded Vision Kit contains the

following components:

Basler dart daA2500-60mc camera module, S-mount

Evetar lens N118B05518W ƒ/1.8, f5.5 mm, 1/1.8"

Developer Board 8 processing board

Basler dart BCON for MIPI mezzanine board, pre-mounted on the

processing board

Flexible flat cable, 0.2 m

USB 2.0 cable (A / Micro B), 1.8 m

HDMI 2.0 cable (A / A), 1.5 m

GigE cable Cat 5e, 2.0 m

Power supply, 18 W, 12 V @ 1.5 A

International power cable plugs (see page 17 for details)

Mounting kit (including camera mounting plate, spacer bolts, screws,

and nuts)

Basler dart Getting Started Guide

This Quick Install Guide

HARDWARE INSTALLATION

Overview of the Components

RQC180203 VER1.0

GND

SDA

SCL

GND

IO-

1V8

SCL

POWER RESET

CAM_PWR

POWER RESET

CAM_PWR

Processing

board

USB 2.0

port

Power LED

(CAM PWR)

Reset button

Basler

dart BCON for

MIPI

camera with

S-mount lens

Power LED

(LED1)

USB 3.0

ports

Power supply

port

GigE

port

Spacer

bolt

Mounting

plate

FFC

connectors

Flexible

flat cable

microSD

card slot

HDMI

port

Mezzanine

board

Power button

Fig. 1: daA2500-60mc-SD820-DB8 – Installed Hardware Components

Indice

Altri manuali Basler Sistema di visione artificiale

Basler

Basler A102K Manuale utente

Manuali Sistema di visione artificiale popolari di altre marche

Festo

Festo SBOC-M-R1B-H Manuale utente

Banner

Banner VE200G1B Manuale utente

SVS-Vistek

SVS-Vistek CoaxPress EoSens Creation 1.1CXP2 Manuale utente

Sony

Sony Vision Exchange PEQ-C100 Manuale utente

Datalogic

Datalogic MX-U81 Istruzioni per l'installazione

Cognex

Cognex In-Sight D900 Series Manuale utente

Spektrum

Spektrum SPMVR2520 Manuale utente

Huaray

Huaray Movidius Series Manuale utente

Daheng Imaging

Daheng Imaging MERCURY2 USB3 Manuale utente

SVS-Vistek

SVS-Vistek exo174 U3 Series Manuale utente

Teledyne

Teledyne e2v Eliixa+ Series Manuale utente

Photron

Photron FASTCAM Mini CX Series Manuale utente

National Instruments

National Instruments Vision CVS-1455 Manuale utente

Omron

Omron FH-L550 Manuale utente

iGen

iGen NV20/20 Manuale utente

JAI

JAI GO-5100MP-USB Manuale utente

Ark Vision Systems

Ark Vision Systems AVS-Monitor 7 FHD Manuale utente

Cognex

Cognex In-Sight 9902L Manuale utente

Basler daA2500-60mc-SD820-DB8 Manuale utente

Manuali Sistema di visione artificiale popolari di altre marche