JAI GO-5100MP-USB Manuale utente
User Manual
GO-5100MP-USB
5.1M CMOS Digital Progressive Scan
Polarized Camera
Document Version: 1.0
GO-5100MP-USB_Ver.1.0_Nov.2018
Thank you for purchasing this product.
Be sure to read this manual before use.
This manual includes important safety precautions and instructions on how to operate the unit. Be sure to read
this manual to ensure proper operation.
The contents of this manual are subject to change without notice for the purpose of improvement.
© 2018 JAI
Contents
Notice/Warranty/Certifications............... 3
Usage Precautions.................................. 5
Features ................................................ 6
Parts Identifications............................... 7
Preparation ........................................... 11
Preparation Process............................. 11
Step 1:Installing the Software(first time
only）................................................. 11
Step 2:Connecting Devices................... 12
Step 3:Verifying Camera Operation...... 14
Step 4:Verifying the Connection between
the Camera and PC............................. 14
Step 5:Changing the Camera Settings.. 17
Step 6:Adjusting the Image Quality..... 18
Step 7:Saving the Settings .................. 20
Main Functions ...................................... 22
Basic Function Matrix .......................... 22
GPIO(Digital Input/Output Settings).... 22
Camera Output Formats ...................... 23
Camera Image Output Modes ............... 24
Binning Function .................................. 26
12-bit Output ....................................... 29
ROI(Regional Scanning Function).......... 29
Image Acquisition Controls.................... 30
Exposure Mode...................................... 32
Trigger Control ..................................... 33
—2—
GO-5100MP-USB
Gain Control ......................................... 38
Line Status ........................................... 38
Blemish Compensation........................... 39
Shading Correction ............................... 40
Sequencer Function............................... 42
Delayed Readout.................................... 44
CounterAndTimerControl Function ......... 44
Chunk Data Function ............................. 46
VideoProcessBypassMode ..................... 46
Setting List ............................................. 47
Feature Properties ................................. 47
Miscellaneous.......................................... 59
Troubleshooting ..................................... 59
Specifications......................................... 60
Frame Rate Reference............................. 62
Spectral Response................................... 62
Dimensions............................................. 63
Comparison of the Decibel Display and
Multiplier Display ................................... 64
User’s Record ......................................... 65
Index........................................................ 66
Notice
The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan and may only
be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of its product and
assumes no responsibility for any errors which may appear or for damages resulting from the use of the
information contained herein. JAI Ltd., Japan reserves the right to make changes without notice.
Company and product names mentioned in this manual are trademarks or registered trademarks of their
respective owners.
Warranty
For information about the warranty, please contact your factory representative.
Certifications
CE compliance
As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC (Electromagnetic
compatibility), JAI Ltd., Japan declares that GO-5100MP-USB complies with the following provisions applying to
its standards.
EN 61000-6-3 (Generic emission standard part 1)
EN 61000-6-2 (Generic immunity standard part 1)
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications to this unit not expressly approved by the party responsible for FCC compliance could
void the user’s authority to operate the equipment.
KC
GO-5100MP-USB
— 3 —
GO-5100MP-USBに変更必要
—4—
GO-5100MP-USB
Supplement
The following statement is related to the regulation on “ Measures for the Administration
of the control of Pollution by Electronic Information Products “ , known as “ China RoHS “.
The table shows contained Hazardous Substances in this camera.
mark shows that the environment-friendly use period of contained Hazardous
Substances is 15 years.
Usage Precautions
—5—
Notes on cable configurations
The presence of lighting equipment and television receivers nearby may result in
video noise. In such cases, change the cable configurations or placement.
Notes on attaching the lens
Avoiding dust particles
When attaching the lens to the camera, stray dust and other particles may adhere
to the sensor surface and rear surface of the lens. Be careful of the following
when attaching the lens.
• Work in a clean environment.
• Do not remove the caps from the camera and lens until immediately before
you attach the lens.
• To prevent dust from adhering to surfaces, point the camera and lens
downward and do not allow the lens surface to come into contact with your
hands or other objects.
•Always use a blower brush to remove any dust that adheres.
Never use your hands or cloth, blow with your mouth, or use other methods to
remove dust.
Phenomena specific to CMOS image sensors
The following phenomena are known to occur on cameras equipped with CMOS
image sensors. These do not indicate malfunctions.
• Aliasing
When shooting straight lines, stripes, and similar patterns, vertical aliasing
(zigzag distortion) may appear on the monitor.
• Blooming
When strong light enters the camera, some pixels on the CMOS image sensor
may receive much more light than they are designed to hold, causing the
accumulated signal charge to overflow into surrounding pixels.This
“blooming” phenomenon can be seen in the image, but does not affect the
operation of the camera.
• Fixed pattern noise
When shooting dark objects in high-temperature conditions, fixed pattern noise
may occur throughout the entire video monitor screen.
• Defective pixels
Defective pixels (white and black pixels) of the CMOS image sensor are
minimized at the factory according to shipping standards. However, as this
phenomenon can be affected by the ambient temperature, camera settings
(e.g., high sensitivity and long exposure), and other factors, be sure to operate
within the camera’s specified operating environment.
Notes on exportation
When exporting this product, please follow the export regulations of your country
or region.
GO-5100MP-USB
Features
Connection example:
— 6 —
The GO-5100MP-USB is a machine vision polarization camera incorporating a
monochrome CMOS image sensor with a 2/3-inch global shutter and a four-directional
polarization square pixel array that offers 5.1 effective megapixels (2464 × 2056). The
unit is compact and lightweight in design and is equipped with a USB 3.0 interface.
Feature overview
•Compliance with USB3 Vision and GenICam standards
•2/3-inch global shutter and a four-directional polarization square pixel array that
offers 5.1 effective megapixels CMOS sensor
• Lens mount: C-mount (flange back: 17.526 mm)
•Pixel size : 3.45 um × 3.45 um
•Effective pixels 2464(H) × 2056(V)
• Up to 74 fps at full resolution
•Various Video Output modes
Raw Image, Four polarizer, Four functions, Color on average image and
Color on gray image.
•Internal test signal for settings configuration
•eBUS SDK for JAI that supports Windows 7, 8, 10
Camera
AC adapter
External Trigger
GO-5100MP-USB
Image sensor with four-directional polarization
Polarizers are provided for individual pixels to capture polarization.
The numbers in the figure on the left indicate the
polarizer angles.
Four polarizer angles are available: 0º, 45º, 90º,
and 135º. Various polarization processing is
performed on the four pixels enclosed in the red
frame as a block.
Also, various functions considered necessary for machine vision are
provided.
The unit is equipped with pre-processing circuits for shading correction and
blemish correction in addition to external trigger, exposure setting, and
image level control.
Parts Identification
①Lens mount（C-mount）
Mount a C-mount lens, microscope adapter, etc. here.
❖Before mounting a lens, be sure to refer to “Step 2:Connecting Devices” and confirm
the precautions for attaching a lens and the supported lens types.
②USB 3.0 connector
Use a USB 3.0 compatible cable to connect this to a USB port on the computer.
— 7 —
③POWER/TRIG LED
Indicates the power and trigger input status.
LED status and camera status
LED Light Status
POWER/
TRIG LED
（Lit amber）
Camera initializing.
（Lit green）
Camera in operation.
（Blinking green）
During operation in trigger mode, trigger signals are
being input.
❖The blinking interval is not related to the actual input interval of
the external trigger.
GO-5100MP-USB
④DC IN/TRIG connector（6-pin round）
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
HR10A-7R-6PB（73）（Hirose Electric or equivalent）
— 8 —
GO-5100MP-USB
Pin No. Input/Output Signal Description
1Power In DC In DC 12 V ～ 24 V ± 10％
2In Opto In 1 GPIO 5
3Out Opto In 1 GPIO 1
4Out Opto In 2 + GPIO 2
5Opto Common
6GND
Recommended external input circuit diagram (reference example)
Recommended external output circuit diagram (reference example)
Standard circuit diagram example
Characteristics of the recommended circuits for Opto OUT
— 9 —
GO-5100MP-USB
⑤Camera locking screw holes（M3, 3mm depth）
Use these holes when attaching an MP-43 tripod adapter plate (optional) or
mounting the camera directly to a wall or other structural system.
— 10 —
GO-5100MP-USB
⑥Camera locking screw holes（M2, 3mm depth）
Use these holes when mounting the camera directly to a wall or other structural
system.
Indice
Altri manuali JAI Sistema di visione artificiale
JAI
JAI BM-500 GE Manuale utente
JAI
JAI GO-5000M-PGE-1 Manuale utente
JAI
JAI GO-5000M-PGE-UV Manuale utente
JAI
JAI GO-5000M-PMCL-UV Manuale utente
JAI
JAI GO-5000M-PGE Manuale utente
JAI
JAI GO-5000M-PGE-UV Manuale utente
JAI
JAI GO-5000M-USB-UV Manuale utente
JAI
JAI SW-4010Q-MCL-M52 Manuale utente
JAI
JAI GO-2400M-PGE Manuale utente
JAI
JAI GO-5000M-USB-UV Manuale utente
