Bastl Knit Rider Manuale utente
Knit Rider Exander
The Knit Rider exander adds clock OUT and reset INOUT
connections to the Knit Rider seuencer. It doesn't work
without Knit Rider Eurorack module.
instruction
Clock Out outputs a pulse each time a step on the
Knit Rider changes (1 step = 4 substeps). It also has
anindicatior LED.
The Reset socket acts as an output or input, depending
on whether the Knit Rider is master or slave. In master
mode, the reset outputs a pulse each time you press
the start stop button. In slave mode, it acts as an input.
When it detects a pulse, the sequencer goes to its first
step (it will play the first step with the first incoming
clock pulse).
additional feature of this expander is a 3-way passive
multiple with clock inverter. The lower 3 connectors
aresimple passive multiples.
The uppermost connector outputs an inverted version
of the signal in the passive multiple. The inversion is
done with a 2.5V threshold (0V or lower becomes 5V
and 5V and higher becomes 0V).
www.bastl-instruments.com
RESET
CLK OUT
KNIT RIDER
EXPANDER
INV OUT
PASSIVE
MULTIPLE
P C B knitt rider
Take it Carefull
connectin the exander
Follow the diagram to connect the ribbon cable to
the Knit Rider. Please make sure the polarity of the
cable is not reversed!
features
expanding the connectivity of the Knit Rider
Eurorack module
clock output with indicatior LED
reset socket can be either output or input,
depending on the master/ slave settings on the Knit
Rider
3 way passive multiple with clock signal inverter
technical details
2HP
powered from the Knit Rider module
with the expander connected the final current
draw of the Knit Rider is: +12: <40mA
bu this than?
r wife will be...
+12
IN
IN
IN
IN
IN
IN
IN
uni2
uni
-12
GND
red
BASTL-INSTRUMENTS.com
designed and produced in czech republic
+12
IN
IN
IN
IN
IN
IN
IN
uni2
uni
-12
GND
red
BASTL-INSTRUMENTS.com
designed and produced in czech republic
P C B expanderv knitt rider
C
A
B
E
L
S
Indice
Altri manuali Bastl Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
