Bat-caddy X4 Manuale utente
X4 Pro
X4R
ATTENTION: Please follow all assembly instructions. READ the
instructions carefully to understand the operating procedures BEFORE
you operate your caddy.
User Manual
X4 Series
X4 Classic
X4 Sport
2
TABLE OF CONTENTS
Packing List.........…………………...............................…............................……3
Parts Glossary........................................................................................………..4
Assembly Instructions.....................……………….......................................5, 6
Operating Instructions...................................................................…….......7, 8
Remote Control Operation (X4R)..............................................................9
Additional Instructions
Braking System, Tracking, USB..........................................................................10
Electronic Systems / Battery .....................................................…….….11, 12
Testing Your Caddy......……………….................................................……12, 13
General Maintenance........................................................................…...…14
Trouble Shooting Guide.................................................................................14
Technical Specications X4 Classic & X4 Sport. .................................15
X4 Pro & X4R.................................................16
Technical Support & Contact Info................................................................17
3
PACKING LIST
X4 Classic, X4 Sport
• Caddy Frame with front wheel
• 2 Rear Wheels (Left & Right)
• 1 Battery Pack (Battery, Bag, Leads)
• 1 Charger
• 1 Tool Kit
• Operational Instructions
• User Manual, Warranty, Terms & Conditions
X4R, X4 Pro
• 1 Caddy Frame with front wheel
• 1 Anti-Tip Wheel & Pin
• 2 Rear Wheels
• 1 Battery Pack, SLA or LI (Battery, Bag, Leads)
• 1 Charger
• 1 Tool Kit
• 1 Remote Control (X4R Only) (2 AAA Batteries included)
• Operational Instructions
• User Manual, Warranty, Terms & Conditions
Standard Accessories (X4Pro & X4R)
• 1 Scorecard Holder
• 1 Cup Holder
• 1 Umbrella Holder
Additional accessories available for purchase at www.batcaddy.com
NOTE:
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT
Bat-Caddy X4R
FCC ID: QSQ-REMOTE
IC ID: 10716A-Remote
4
1. Manual Rheostat Speed Control
2. Upper Bag Support
3. Bag Support Strap
4. Battery
5. Rear wheel
6. Rear Wheel Spring Clip Release & Lock
7. Dual Motors (within housing tube)
8. Lower Bag Support & Strap
9. Front Wheel
10. Upper Frame Locking
Knob
11. Power Button & Control
12. USB Port
13. Battery Connection Plug
14. Front Wheel
Tracking Adjustment
15. Charger
16. Remote (X4R only)
17. Anti-tip wheel & Pin (X4 Pro, X4R)
PARTS GLOSSARY
X4 Series
2
1
3
4
69
8
11
7
5
10
13
14
15
5
16
17
12
5
ASSEMBLY INSTRUCTIONS
X4 Series
1. Unpack all items carefully and check inventory. Place frame structure (one piece)
on soft clean ground to protect the frame from being scratched.
2. Attach rear wheels to axles by pushing the wheel locking button (Pic-1) on the
outside of the wheel and inserting the axle extension in to the wheel. Make sure
to keep the spring clip (PIC-2) on the outside of the wheel depressed during
this process, in order to enable the wheel to be inserted fully onto the axle
sprocket. If you have inserted the wheel correctly onto the wheel when you
release the spring clip it will lock onto a groove on the end of the axle. If not locked
properly, the wheel will not be connected to the axle and will not be propelled! Test
the lock by trying to pull the wheel out.
Pic-3
Pic-2
Pic-1
3. The X4 Classic & X4 Sport caddies have a specic right (R) and a left (L)
wheel (Pic-3), as seen from behind in driving direction. Please make sure
that the wheels are assembled on the correct side, otherwise the clutches
will not engage. To disassemble the wheels, proceed in reverse order.
Note: The X4 Pro & X4R rear wheels are interchangeable. They t on either side.
4. Erect Frame by unfolding and connecting the main frame tubes together
at the two frame locks. On the lower frame lock screw (Pic-2) make sure
the middle frame piece sets securely against the lower frame so the screw
line up with the threaded insert. One the upper locking screw (Pic-3) you
have a range of adjustment to the height depending on your preference.
5. Proceed in reverse for folding the caddy.
Pic-2 Pic-3
Left, Right Markers
6
ASSEMBLY INSTRUCTIONS (Continued)
7. For X4R and X4 Pro insert anti-tip wheel into holding bar on
motor housing and secure with pin.
6. Place the battery pack on the battery
tray. Insert the 3-prong battery plug
into the caddy outlet so the notch
aligns properly and attach T-connector
onto the battery.
(SLA Battery lead is attached to battery)
Then attach Velcro strap. Tightly fasten the Velcro strap
underneath the battery tray and around the battery. It is
recommended that you DO NOT fasten the screw on the plug
to the outlet, so in case of tip-over, the cable can unplug from
the socket.
8. Attach optional accessories, such as Scorecard/Beverage/Umbrella holder, below the
handle. Instructions provided separately.
X4R Only
8. Unpack remote control and install batteries with plus and minus
poles as indicated in the diagram in the battery compartment of
the unit.
Note: BEFORE CONNECTING make sure that caddy power is OFF, the Rheostat
Speed Control is in OFF position and the remote control is stored securely!
Pin
7
1. Press and hold ON/OFF power button for about 2-5 seconds to turn caddy on or off
(LED will light up)
2. The rheostat speed dial on the right side of the handle lets you choose your preferred
speed seamlessly. Dial forward to increase speed. Dial backwards to reduce speed.
Suggestion: When rst starting out, set your normal walking speed. Mark that position on
your rheostat with a marker as a reference point.
3. To set the Digital Cruise Control: Select the ideal speed to match your pace with the
rheostat speed dial. Then keep that speed by stopping the cart with a press of the power
button. This will stop the cart, but keep the speed already set on the speed dial. Once
you are ready to go press the power button again, and the caddy will automatically travel
at the same speed it was last set. Once you are moving again you can adjust the speed
with the Rheostat speed dial.
4. The caddy is equipped with a “Soft start” ability which ensures smooth acceleration up to
your selected speed.
5. The caddy is equipped with a 10, 20, 30 M/Y Advance Distance Timer: From a stationary
position Press the “Timer” button once, the caddy will advance 10 m/y and stop, press
twice for 20 m/y and 3 times for 30 m/y. You can stop the caddy during your distance
timer by pushing the stop button on either your handle or remote.
6. The green and red LED battery indicator on the control shows the battery charge at
any time. If green, the battery is measuring over 12V and is ne. When it turns red it is
measuring under 12V and needs to be charged soon.
Dual function - Power button / Stop-Go feature
Advanced Distance Timer
Battery indicator & power light
Green - battery full
Red - battery almost depleted
OPERATING INSTRUCTIONS
X4 Sport / X4 Pro / X4R
Manual Handle Control Functions
Rheostat speed dial
8
OPERATING INSTRUCTIONS (continued)
X4 Classic
1. The X4 Classic has a different face plate.
2. Power button has single feature power up cart or shut it off.
3. To set the Digital Cruise Control: Select the ideal speed to match your pace with the
rheostat speed dial. Then keep that speed by stopping the cart with a press of the green
button w/triangle. This will stop the cart, but keep the speed already set on the speed dial.
Once you are ready to go press the power button again, and the caddy will automatically
travel at the same speed it was last set. Once you are moving again you can adjust the
speed with the Rheostat speed dial.
4. With this model you set the speed by pressing the green arrow button just below the
power button
Power button On/Off
Stop/start button for digital cruise control
Battery indicator & power light
Green - battery full
Red - battery almost depleted
9
FUNCTIONS:
1. STOP: The red button in the middle of the directional arrows should be used to
stop the caddy abruptly or as emergency brake.
2. TIMER: 10, 20, 30 yards/meters: press once -10 yds., twice -20 yds.;
three times - 30 yds.
3. BACKWARD ARROW: Pressing the back arrow will set the caddy in backward mo-
tion. Increase backward speed by pushing multiple times. Press also to decrease
forward speed/slowing the caddy.
4. FORWARD ARROW: Pushing the forward arrow will set the caddy in forward
motion. Pushing multiple times will increase the speed. Push arrow to slow down. If
you need to stop press the stop button.
5. LEFT ARROW: Left turns. When the arrows are released the caddy stops turning
and continues straight at the original speed prior to turning.
6. RIGHT ARROW: Right turns. Same as left arrow function.
7. ON/OFF Switch: Located on the right side of the device. Turns
remote control on or off; recommended to prevent
accidental engagement of caddy.
8. ANTENNA: Internal
9. LED: Lights up when a button is being v
pushed indicating a signal is being sent
10. BATTERIES: 2 x 1.5V AAA
Remote Control Operation (X4R Only)
9
7
6
5
4
3
2
1
Remote Control Resynchronization
Step 1 - Make sure power is totally off for at least ve (5) seconds.
Step 2 - Hole down the stop button on the remote
Step 3 - Power up cart. Continue to hold down the stop button on the remote.
Step 4 - Continue to hold down the stop button until lights on the LED blink.
Step 5 - Cart is now in “sync” test each function to assure all are functioning.
You’re ready to go!
10
Additional Functions
Braking System: The caddy drive train is designed to keep the wheels engaged with the
motor/gearbox, thus acting as a brake that will maintain the caddy’s speed while going
downhill.
Tracking Adjustment*: Tracking behavior of all electric caddies is strongly dependent
on equal weight distribution on the caddy and slope/topography of the golf course. Test
your caddy’s tracking by operating it on a level surface without the bag. If changes are
necessary, you can adjust the tracking of your caddy by loosening the front wheel axle and
the Adjustment bar on the right side of the from wheel and shifting the axle accordingly. After
such adjustment fasten screws in-reverse order but do not over tighten.
*Tracking - there is a video on the website that shows
how to adjust tracking
AXLE
ADJUSTMENT BAR
USB port is available for charging GPS and/or cell phones. It is located
in the end cap of the upper frame above the handle control.
Pic-2
Altri manuali per X4
3
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Bat-caddy Carrello da golf
Bat-caddy
Bat-caddy X4 Manuale utente
Bat-caddy
Bat-caddy X4 Manuale utente
Bat-caddy
Bat-caddy X3 Series Manuale utente
Bat-caddy
Bat-caddy X8 Series Manuale utente
Bat-caddy
Bat-caddy X3 Series Manuale utente
Bat-caddy
Bat-caddy X4R Manuale utente
Bat-caddy
Bat-caddy X3 Series Manuale utente
Bat-caddy
Bat-caddy X8 Series Manuale utente
