BCM BC35Q Manuale utente

ATX

BC35Q

Intel® 65nm

Core™ 2 Quad/ Core™ 2 Duo/

Pentium® Dual-Core/ Celeron 440

w/ 1333/1066/800MHz FSB

User’s Manual

Edition 1.04 – Jan, 2009

FCC Statement

THIS DEVICE SUPPORTS PART 15 FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE

THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS

"A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS

EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT

INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL

INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE

INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

BCM Advanced Research reserves the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve design and/or

performance. BCM Advanced Research assumes no responsibility or liability for the use of the described

product(s), conveys no license or title under any patent, copyright, or masks work rights to these products,

and makes no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this manual are for

illustration purposes only. BCM Advanced Research makes no representation or warranty that such

application will be suitable for the specified use without further testing or modification.

Life Support Policy

BCM Advanced Research PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF BCM Advanced

Research.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with

instructions for use provided in the labeling, can be reasonably expected to result in significant injury to

the user.

2. A critical component is any component of a life support device or system whose failure to perform can

be reasonably expected to cause the failure of the life support device or system, or to affect its safety

or effectiveness.

A Message to the Customer

BCM Customer Services

Each and every BCM product is built to the most exacting specifications to ensure reliable performance in

the harsh and demanding conditions typical of industrial environments. Whether your new BCM device is

destined for the laboratory or the factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name BCM has come to be known.

Your satisfaction is our primary concern. Here is a guide to BCM customer services. To ensure you get the

full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into technical difficulties,

we are here to help. For the most frequently asked questions, you can easily find answers in your product

documentation. These answers are normally a lot more detailed than the ones we can give over the phone.

So please consult the user’s manual first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.bcmcom.com.

If you still cannot find the answer, gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the

support you need to get the most from your BCM products. In fact, most problems reported are minor and

are able to be easily solved over the phone.

In addition, free technical support is available from BCM engineers every business day. We are always

ready to give advice on application requirements or specific information on the installation and operation of

any of our products. Please do not hesitate to call or e-mail us.

BCM Advanced Research

7 Marconi,

Irvine, California, 92618

USA

Tel : +1-949-470-1888

Fax : +1-949-470-0971

http://www.bcmcom.com

E-mail: [email protected]

Product Warranty

BCM warrants to you, the original purchaser, that each of its products will be free from defects in materials

and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than

repair personnel authorized by BCM, or which have been subject to misuse, abuse, accident or improper

installation. BCM assumes no liability under the terms of this warranty as a consequence of such events.

Because of BCM high quality-control standards and rigorous testing, most of our customers never need to

use our repair service. If any of BCM products is defective, it will be repaired or replaced at no charge

during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of

replacement materials, service time, and freight. Please consult your dealer for more details. If you think

you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type and speed, BCM

products model name, hardware & BIOS revision number, other hardware and software used, etc.)

Note anything abnormal and list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any helpful

information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization) number from

your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card and a

photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for warranty service.

Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

Manual Objectives

This manual describes in detail the BCM BC35Q Main board.

We strongly recommend that you study this manual carefully before attempting to interface with BC35Q or

change the standard configurations. Whilst all the necessary information is available in this manual we

would recommend that unless you are confident, you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that make booting

impossible. If this should happen, clear the CMOS settings, (see the description of the Jumper Settings for

details).

If you have any suggestions or find any errors concerning this manual and want to inform us of these,

please contact our Customer Service department with the relevant details.

Safety Precautions

Warning!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while

the power is on. Sensitive electronic components can be damaged by

sudden power surges. Only experienced electronics personnel should

open the PC chassis.

Caution!

Always ground yourself to remove any static charge before touching

the mainboard. Modern electronic devices are very sensitive to static

electric charges. As a safety precaution, use a grounding wrist strap at

all times. Place all electronic components in a static-dissipative surface

or static-shielded bag when they are not in the chassis.

Document Amendment History

Revision Date Comment

1st (1.00) June, 2008 Initial Release

2nd (1.01) July, 2008 1. Updated PCI-EX x4,and PCI-EX x16, DVI

applications.

2. Added BIOS flash application (warning) in

section3.

3rd (1.02) Nov, 2008 1. Updated Accessory Kit information in

section 1.2.

2. Updated headers “J1” and “J2”

information.

4th (1.03) Dec, 2008 1. Updated headers “J1” and “J2”

information.

5th (1.04) Jan, 2009 1. Updated headers information

Contents

Chapter 1: System Setup ..............................................................................................11

1.1 Welcome! ......................................................................................................................................11

1.2 Packing Contents..........................................................................................................................11

1.3 Special Features ...........................................................................................................................12

1.3.1 Product Highlights.........................................................................................................................12

1.4 Before you proceed.......................................................................................................................14

1.5 Mainboard Overview .....................................................................................................................15

1.5.1 Placement direction ......................................................................................................................15

1.5.2 Screw Holes ..................................................................................................................................15

1.5.3 Mainboard Layout .........................................................................................................................16

1.6 Central Processing Unit (CPU) .....................................................................................................17

1.6.1 Installing the CPU .........................................................................................................................18

1.6.2 Installing the CPU Heatsink and fan .............................................................................................20

1.6.3 Uninstalling the CPU Heatsink and fan.........................................................................................22

1.7 System Memroy ............................................................................................................................24

1.7.1 Overview .......................................................................................................................................24

1.7.2 Dual-Channel Mode Population Rule ...........................................................................................24

1.7.3 Installing DIMM .............................................................................................................................25

1.7.4 Removing a DIMM...................................................................................................26

1.8 Power Supply................................................................................................................................27

1.8.1 ATX 24-pin Power Connector: JPWR3.........................................................................................27

1.8.2 ATX 12V Power Connector: JPW1 ...............................................................................................27

1.9 Back Panel....................................................................................................................................29

1.10 Connectors/Headers .....................................................................................................................31

1.10.1 IDE Connector: IDE1 ....................................................................................................................31

1.10.2 Serial ATA Connectors: SATA1, SATA2, SATA3, SATA4, SATA6 ..............................................31

1.10.3 Fan Power Connector: CPUFAN1, AUXFAN1, SYSFAN1, SYSFAN2 ........................................32

1.10.4 Chassis Intrusion Switch Header: JCI1 ........................................................................................32

1.10.5 CD-In Connector: JCD_IN1 ..........................................................................................................32

1.10.6 S/PDIF-Out Connector: JSPDO1..................................................................................................33

1.10.7 Front Panel Audio Connector: JAUD1 ..........................................................................................33

1.10.8 Front USB Connectors: JUSB1, JUSB2, JUSB3..........................................................................34

1.10.9 Serial Port Connectors: COM1, COM2.........................................................................................34

1.10.10 COM Port Ring-in, Power Select: J1(for COM1), J2(for COM2) ..................................................35

1.10.11 LPT Port Connector: JLPT1..........................................................................................................35

1.10.12 Front Panel Connectors: JFP1......................................................................................................36

1.10.13 SM Bus Connector: JSMB ............................................................................................................36

1.11 Jumpers ........................................................................................................................................37

1.11.1 Clear CMOS Jumpers: JBAT1 ......................................................................................................37

1.11.2 The Header: JSPI1 .......................................................................................................................37

1.12 The Expansion Slots .....................................................................................................................38

1.12.1 Installation of expansion card .......................................................................................................38

1.12.2 Setup an expansion card ..............................................................................................................38

1.12.3 PCI (Peripheral Component Interconnect) Express Slot ..............................................................38

1.12.3.1 PCI-Ex16 Slot: PCI-E3, PCI-E4 ....................................................................................................39

1.12.3.2 PCI-E x1 Slot: PCI-E1, PCI-E2 .....................................................................................................39

1.12.4 PCI Slots: PCI1, PCI2, PCI3 .........................................................................................................39

Chapter 2: Starting Up the System .............................................................................40

2.1 Starting Up Your System ...............................................................................................................40

Chapter 3: BIOS Setup ..................................................................................................42

3.1 Introducing BIOS...........................................................................................................................42

3.2 Entering BIOS Setup Menu...........................................................................................................43

3.3 Getting Help ..................................................................................................................................43

3.4 The Main Menu .............................................................................................................................44

3.5 Standard CMOS Features ............................................................................................................46

3.6 Advanced BIOS Features .............................................................................................................49

3.7 Integrated Peripherals...................................................................................................................53

3.8 Power Management Setup ...........................................................................................................56

3.9 PnP/PCI Configurations ................................................................................................................59

3.10 H/W Monitor ..................................................................................................................................61

3.11 Frequency/Voltage Control ...........................................................................................................62

3.12 Load Fail-Safe/ Optimized Defaults ..............................................................................................63

3.13 BIOS Setting Password ................................................................................................................64

Mainboard Specifications

Model BC35Q

Processor Intel®65nm LGA 775 processors.

Supports Intel® Core™ 2 Quad/ Core™ 2 Duo/ Pentium® Dual Core / Celeron 440

w/ 1333/1066/800MHz FSB

North Bridge Intel®Q35

Memory DDR2 800/667 SDRAM

* Supports DDR2 667MHz (PC2-5300), DDR2 800MHz (PC2-6400) memory modules

up to 8GB max. (2GB max/ DIMM slot)

* DDR2 667MHz recommended for 8GB configuration

* 4 DDR2 DIMM slots (240-pin/ 1.8V), supports Non-ECC, un-buffered memory

Integrated Graphics Intel® GMA 3100 Engine; up to 256MB can be allocated for GFX

South Bridge Intel® ICH9DO

SATA 5 x SATA II connectors supports 3.0 Gbs transfer speed

PCI-E 2 x PCI-E x 16 slots

(slot PCI_E4 supports transfer rate up to x4 only. When PCI-E x1 slot is occupied,

the performance on PCI_E4 slot drops to PCI-E x1 only)

2 x PCI-E x 1 slots

PCI 3 x PCI Slots (PCI 2.2 compliant)

USB 12 x USB 2.0 ports (6 x Rear I/O, 6 x header)

iTE® IT8213F PCI to IDE ControllerIDE

Supports Ultra DMA 66/100/133 transfer rate

Infineon® TPMTPM

1 x TPM 1.2 Security Device

Super I/O Controller Fintek® F71882FG

Serial Ports 2 x RS232 ports (2 x header)

LPT 1 x LPT header

Watch Dog Timer 1 ~ 255 sec timer

HW Monitor Yes

Realtek® ALC888Audio

HD Audio Codec with auto jack sensing

Intel® 82566DM Gigabit LAN

1 x 10/100/1000 LAN

Intel® 82573L PCI-E Gigabit LAN

LAN

1 x 10/100/1000 LAN

AMI® BIOSBIOS

AMI Bios with 32Mb SPI ROM

Expansion Slots

PCI-E 2 x PCI-E x 16 Slots supports PCI-E x16 Graphic card

Slot “PCI_E4” supports up to 4x transfer rate (only when there is no card installed

on PCI_E1 and PCIE2 slots).

When PCI-E x1 slot (“PCI_E1” and/or “PCI_E2”) is occupied, PCI_E4 slot will only

support PCI-E x1 device )

2 x PCI-E x 1 slots

PCI 3 x PCI slot

Onboard I/O Headers

IDE 1 x IDE Connector

SATA 5 x Std. SATA Connectors

USB 3 x USB Headers (6 ports on headers)

RS232 2 x Header

COM Port Power Select 2 x Headers provides 12V or 5V to COM port

SPDIF 1 x Header

CD-IN 1 x Header

Front Audio 1 x Header

Front Panel 1 x Headers

Fan Header 4 x Headers ( 2 x 4-pins, 2 x 3-pins)

Chassis Intrusion Header 1 x Header

Back I/O Panel

PS/2 Keyboard Mouse 1 x DIN 6 Stack up Connector

VGA 1 x DB 15 Connector

DVI 1 x DVI Connector

USB 1 x Stack up USB Connector (2 USB ports)

LAN and USB 2 x Stack up RJ45 and USB Connectors (2 USB ports)

Audio 1 x 6 jacks Audio Connector

Power & Connector

1 x Std. 24 pin ATX Connector

1 x 4 pin ATX 12 Connector

Form Factor

ATX 12.0” x 9.6”

Indice

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente