BCN3D ignis Manuale utente
ignis
Instruction Manual
Contents
Compliance Information
General
Product Components
Technical Specifications
General description
General dimensions
BCN3D IGNIS main systems
Technical characteristics sheet
Processable materials
Security
Team of allowed users
Safety components
Warnings
Safety pictograms
Transport - Storage - Installation
Transport
Storage conditions
Installation conditions
Assembly and installation
PC configuration
RDWorks installation
Using RDWorks
Interface
Configuring the laser’s parameters
Sending tasks to BCN3D-IGNIS
Function of the control panel
Control panel
Introduction to the general interface
Z/U Menu
File Key
Operation
Control panel
Initial adjustments
Stops and emergency stops
Maintenance
Maintenance plan
Maintenance operations
Frequent problems
4
5
6
7
7
7
8
10
12
13
13
13
14
18
19
19
19
19
20
21
21
24
24
25
27
28
28
29
31
34
36
36
37
39
42
42
43
52
4 Instruction Manual
Conformity Information
The compliance label including regulations can be found
on the back of the machine.
Instruction Manual 5
General
This instruction manual aims to:
• Inform users of the machine, its operating modes and operating limitations;
• Present the product’s technical specifications;
• Warn on the safety requirements of the machine and its components;
• Establish modes for installation and start-up;
• Indicate the necessary maintenance procedures.
Following the instructions for use contained in this manual:
• Will avoid situations involving hazards and risks;
• Will minimize repairs costs and downtimes of the machine;
• Will increase the machine’s reliability and useful life.
6 Instruction Manual
Product Components
BCN3D Ignis “Honeycomb” metal mesh
PC-USB cable
Machine connection key
Instruction manual
Network cable Power supply cable
Electronic panel access key
2 lens-cleaning cloths
Pen drive - Software
1575,50
1247,25
1882
997
Instruction Manual 7
General description
General dimensions
Technical Specifications
BCN3D IGNIS has been designed for cutting, marking and engraving specific materials listed in this document (Pro-
cessable materials, page14).
For more information: https://www.bcn3dtechnologies.com/es/ignis-downloads/
DESCRIPTION
Maximum width
Maximum depth
Height, cover closed
Height, cover open
Minimum weight, with packaging
DIMENSION
1576
997
1248
1882
300
UNIT
mm
mm
mm
mm
Kg
8 Instruction Manual
The optic system is created with the tube, its mirrors, the
lens and the beam combiner. The function
of this system is to direct the radiation originating in
the laser tube up to the head by means of the mirrors and
to concentrate the energy at the cutting point by means of
the 2 inclus lens. The beam combiner allows having a
visual reference of the exact position of the beam during
the path.
The laser beam moves in the work plane from the action
of the motors for the X, Y guides.
Primary Systems for the BCN3D IGNIS
To better understand this instructions manual, the following describes the three fundamental systems of the
BCN3D IGNIS:
1Tube laser
2Mirror grouping
3Head
4 Y axis motor
5Y axis guides
6X axis motor
7X axis guides
8Beam Combiner
4
1
5
3
2
7
Optic system and X-Y axis
8
Instruction Manual 9
Work platform and the Z axis
Ventilation and refrigeration
integrated system
The parts for cutting or scanning are placed on the
Honeycomb, which are extractable to clean the cube.
The Z axis moves vertically, is motorized and works to
position the part to the correct height for the task.
This positioning is completed automatically with
the “Autofocus” function. The length of the z axis is
290mm.
BCN3D Ignis comes with an integrated ventilation
system with a turbine. This system is located in the
interior of the machine and is controlled by the system
itself. BCN3D Ignis has air vents on the upper case, thus
creating a continuous flow for extracting air.
The ventilation system guarantees an efficient
extraction of dust and gases that are formed while
operating a cut, mark and scanning.
The water refrigeration system allows the laser tube
to work in ideal conditions, lengthening the maximum
lifespan.
Primary Systems for the BCN3D IGNIS
10 Instruction Manual
Technical characteristics sheet
Physical properties
Exterior dimensions
Packaging dimensions
Weight
Noise (weighted in A)
Maximum operating temp.
Machine properties
Maximum cutting area
Maximum piece size
Repeatability
Resolution
Minimum text font
Laser type
Power
Display
Operations
Fume extraction
Cooling
Lens
Mirrors
Table type
Safety
Certification
Red pointer
1576x997x1248mm
160x1160x11411 (+-10)mm
300kg
70-71dB (A)
70ºC
995x575mm
1000x600x290mm
+-0.01mm
0.0231mm (1100DPI)
1,7mm alphanumeric characters
CO2
100w
320x480 TFT 3.5” color, con visualizador de operaciones
Engraving
Marking
Cutting
P550W 220V (860m3/h)
Water Chiller CW3000
2” (ZnSe) 2’5”; 3”; 3’5”; 4” (opcional)
3xØ20mm
Honeycomb
Category I (with ongoing supervision)
CE
The red pointer allows us to have a visual
reference of the point where the laser will cut
Indice
Altri manuali BCN3D Stampante 3D
BCN3D
BCN3D Sigma Manuale utente
BCN3D
BCN3D Epsilon Series Manuale utente
BCN3D
BCN3D BCN3DR Manuale utente
BCN3D
BCN3D Sigma R16 Manuale elenco delle parti
BCN3D
BCN3D Sigma Series Manuale utente
BCN3D
BCN3D Epsilon Manuale utente
BCN3D
BCN3D Sigma Manuale utente
BCN3D
BCN3D Sigmax R19 Manuale utente
BCN3D
BCN3D Epsilon Series Manuale utente
BCN3D
BCN3D Smart Cabinet Manuale utente
BCN3D
BCN3D Epsilon Series Manuale utente
BCN3D
BCN3D Epsilon Series Manuale utente
BCN3D
BCN3D Sigma Series Manuale utente
BCN3D
BCN3D Sigmax Manuale utente
BCN3D
BCN3D sigma R19 Manuale utente
BCN3D
BCN3D Epsilon Series Manuale utente
BCN3D
BCN3D Sigma Series Manuale utente
BCN3D
BCN3D Sigma Series Manuale utente
