Beats Solo Pro Manuale di programmazione

Sound troubleshooting–

headphones and earphones

aving trouble with your audio? Find answers here.

Snapping, crackling, popping, or no audio on one side

1. Make sure the 3.5 mm audio jack is fully plugged in. The straight input connects to your

headset, and the L-shaped input connects to your audio device.

2. Check that your audio source is on and working.

3. If your audio source is a computer or laptop, try adjusting the configuration settings.

4. If you still hear distorted sound, try a different audio source and an alternate cable.

Volume too high

Turn the source volume down.

Phone not responding to button presses

Make sure that the headset plug is securely connected. For multi-press functions, vary

the speed of presses when you use the remote/mic.

Compatibility issues

Remember to install the latest software updates on your device. The inline remote/mic

may have limited functionality with devices that don’t run iOS.

Microphone does not pick up sound

oMake sure that the headset plug is securely connected and that the socket is clean and clear.

oCheck that the microphone—located on the back of the remote—isn’t blocked or covered.

oMake sure the straight-end of the plug is connected to the headphones and the angled L-

shaped plug is connected to the audio source.

oIf you're using your Beats with a computer, make sure that your computer microphone is set to

the correct input source.

If you can't connect to your wireless

Beats product

Here's how to troubleshoot the Bluetooth connection between your Beats product and

your iPhone, iPad, iPod touch, Mac, or other device.

Check the location

Place your Beats product and your paired device within 30 feet of each other. Move

both devices away from other Bluetooth devices, microwaves, wireless routers, and

other electronics.

Check the sound settings

On your iOS device, go to Settings > Bluetooth and select your Beats.

On your Mac, choose Apple ( ) menu > System Preferences, click Sound, then select

your Beats product in the Output and Input panes.

On your PC, go to the sound settings and select your Beats as the playback/recording

device.

Check the volume

1. Make sure that both your Beats product and your Bluetooth device are charged and turned on.

2. Play a track that you downloaded to your device, not streaming audio.

3. Increase the volume on your Beats product and on the paired Bluetooth device.

Use Forget Device, then pair your Beats again 
4. Disconnect your Beats product. 
On your iOS device, go to Settings > Bluetooth, tap the i next to the name of your Beats 
product, then tap Forget This Device. 
On your Mac, choose Apple ( ) menu > System Preferences, click Bluetooth, select your Beats 
product, click the X, then choose Forget Device. 
5. Pair your Beats product again. 
Reset your Beats product, then pair them again 
Reset your headphones, reset your earphones, or reset your speakers. Then pair your 
Beats product with your device again. 
 
Pair your Beats product 
Follow the pairing instructions for your Beats product: 
oStudio3Wireless 
oSolo3Wireless 
oBeatsx
oPill+
oPowerbeats3Wireless 
oBeatbox Portable 
oPill 1.0, Pill 2.0 
oPowerbeats2Wireless 
oStudio Wireless 
oWireless 
If you still need help 
If you hear distorted sound, learn how to troubleshoot audio issues with your Beats 
speakers or with your Beats headphones or earphones. 
 
Reset your Beats on-ear or over-ear 
headphones 
Share via Email(opens in new window) 
Share via link(opens in new window) 
Print 

If you're having sound, Bluetooth, or charging issues with your headphones, try

resetting them.

Solo Pro

Studio3Wireless

Studio or Studio Wireless

Solo3Wireless

Solo2Wireless

Solo Wireless

Reset Solo Pro

1. Hold down the mode button and volume down button for 10 seconds.

2. When the LED flashes red, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Studio3Wireless

3. Hold down the power button and volume down button for 10 seconds.

4. When the Fuel Gauge flashes, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Studio or Studio Wireless

5. Press and hold the power button for 10 seconds.

6. Release the power button.

7. All of the Fuel Gauge LEDs blink white, then one LED blinks red. This sequence happens three

times. When the lights stop flashing, your headphones are reset.

Your Studios will automatically power on after a successful reset.

Reset Solo3Wireless

8. Hold down the volume down button and the power button for 10 seconds.

9. When the Fuel Gauge flashes, release the buttons.

Your headphones are now reset and ready to be set up with your devices again.

Reset Solo2Wireless

10. Make sure your headphones are not plugged in to your USB charging cable.

11. Press and hold the power button for 10 seconds.

12. Release the power button.

13. All of the Fuel Gauge LEDs blink white, then one LED blinks red. This sequence happens three

times. When the lights stop flashing, your headphones are reset.

Reset Solo Wireless

14. Switch off the headset.

15. Hold the multifunction and volume down buttons for eight seconds.

16. The red and blue indicator lights alternate three times.

Other things you can try

Still having issues with your headphones? Try these things next:

oTry using another power source or a different cable.

oLearn about sound troubleshooting for headphones or Bluetooth troubleshooting.

oUse the Beats Updater to get the latest firmware. If you have Solo3headphones that you set up

with an iPhone using iOS 10, you automatically receive the latest firmware.

Altri manuali per Solo Pro

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Beats Cuffie

Beats

Beats Headphones Manuale utente

Beats

Beats Beats Dr. Dre Solo Manuale utente

Beats

Beats Studio Wireless Manuale utente

Beats

Beats powerbeats2 wireless Manuale utente

Beats

Beats MIXR Manuale utente

Beats

Beats Headphones Manuale utente

Beats

Beats Beats Studio Manuale utente

Beats

Beats powerbeats 2 B0516 Manuale utente

Beats

Beats Solo2 Manuale utente

Beats

Beats Tour2 Manuale utente

Beats

Beats Solo HD Manuale utente

Beats

Beats Solo Pro Manuale utente

Beats

Beats In-Ear Headphones Manuale utente

Beats

Beats Solo HD Manuale utente

Beats

Beats Beats by Dr. Dre Manuale utente

Beats

Beats MH BTS ON SOHD BK CT EU Manuale utente

Beats

Beats Tour2 Manuale utente

Beats

Beats Solo2 Manuale utente

Beats

Beats Beats Studio Manuale utente

Beats

Beats Tour2 Manuale utente

Beats

Beats powerbeats2 wireless Manuale utente

Beats

Beats powerbeats2 wireless Manuale utente

Beats

Beats Beats Solo3 Wireless Manuale utente

Beats

Beats Wireless Manuale utente

Manuali Cuffie popolari di altre marche

Sony

Sony MDR-NC8 Manuale utente

AUSounds

AUSounds AU-Stream Manuale utente

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuale utente

Philips

Philips SHE3622 Manuale utente

Insignia

Insignia NS-CAHBTSPORT Manuale utente

Movie Vision

Movie Vision HP-400 Manuale utente

MobiFren

MobiFren SM Pro Manuale utente

Motorola solutions

Motorola solutions PMLN8120 Manuale utente

Jaybird

Jaybird freedom Guida all'installazione

Sony

Sony MDR-ED12LP Manuale utente

HiFuture

HiFuture Tidy Buds Pro Manuale utente

Creative

Creative CB2530 Manuale utente

Renkforce

Renkforce RF FTVK-100 Manuale utente

Philips

Philips SHQ3000 Manuale utente

Sennheiser

Sennheiser 500371 Manuale utente

Califone

Califone 2924AV Manuale utente

Philips

Philips EARGEAR HE205 Series Manuale utente

Technics

Technics EAH-AZ80 Manuale utente