Bebe Care Petit Manuale utente
STROLLER
MODEL # 011301
IMPORTANT: RETAIN FOR
FUTURE REFERENCE,
READ CAREFULLY
1
3
SAFETY PRECAUTIONS
Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please use
caution when folding or unfolding the stroller.
Always check that safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 3kgs in the basket or 1kg in the hood pocket (if supplied).
The weight of the child using the product should not exceed 17kgs.
The height of the child using the product should not exceed 96cm.
It is unsafe to use parts other than those approved by the manufacturer.
Never ride with more than one child in the stroller.
Regularly inspect all parts and locking devices, promptly replace worn out or broken parts.
Never leave a child in the pram/stroller when ascending or descending stairs or escalators or when
travelling on other forms of transport.
To prevent the risk of the stroller catching fire, do not park it near an open fire, heater or barbeque.
Do not make any changes or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
Never leave safety harness connected when not fitted to a child in the stroller as this may create loops
that could cause a strangulation hazard.
Ensure the storage latch is fully engaged when lifting or carrying the stroller
TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS
STATIONARY.
DO NOT LEAVE CHILD UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF
YOU ADJUST THE STROLLER.
TO AVOID INJURY ENSURE THAT YOUR CHILD IS KEPT AWAY
WHEN FOLDING AND UNFOLDING THE STROLLER.
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE
WARNING
Before assembling this stroller, read and understand the instructions. Incorrect assembly may make the stroller
unsafe. Do not use this stroller if any part is broken, torn or missing. Keep instructions in a safe place for future
reference.
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and design
may vary from images shown. CNP Brands reserves the right to alter product specifications
without notice as a result of our ongoing policy of product improvement.
Assembly contents list
Assembly / Operating instructions
Stroller accessories
How to care for your bebe care stroller
Contents
Congratulations on your purchase of the
bebe care Petit Stroller.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
54
Supplied loose in box:
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
x1
x1
x1
Frame
Assembly Contents Assembly Instructions
Bumper bar
Infant carrier adapters
Opening the stroller
1. The stroller should be in the locked position when it is
unpacked. To unlock and open the stroller, please use the
following steps.
2. Grasp the stroller latch and pull outward to unlock the stroller.
WARNING: Keep ngers clear of all moving parts when opening or closing stroller.
76
Assembly / Operating Instructions
3. Lift up the stroller by the handle and
move forward simultaneously until the
stroller opens and ‘clicks’ into position.
Assembly / Operating Instructions
1. Push in buttons on both sides of the frame. These are
located on the inner sides of the frame as per image.
2. Ensure hood is collapsed completely. Fold hood of
stroller back until it’s ush with the back of the stroller.
3. Lift the upper latches located on either side of the
stroller frame and push stroller forward. This will
disengage the stroller and collapse it.
4. Push down rmly to ensure the latch is locked into
place. Ensure the lock at the side is secure.
Folding the stroller
98
Assembly / Operating Instructions
1. Hold both straps whilst pushing in the
button of the seat adjuster strap and pull
outward to desired seat position.
2. Release straps by pushing in the bottom
of the seat adjuster strap and pulling
downwards.
1. To engage brake, push down on the red brake pedal with foot.
To unlock the brake, lift the brake on the rear wheels with foot.
Adjusting backrest
Using the rear brakes
WARNING: On unmade or uneven surfaces all swivels must be locked.
WARNING: Always apply brakes when parking stroller.
Removing the bumper bar
1. Squeeze the buttons on both sides of the bumper bar as per
image. Pull outwards from seat.
Canopy functions
1. Pull the canopy cover forward or push backward.
Assembly / Operating Instructions
Attaching the bumper bar
1. Insert front bumper bar into
openings on the sides of the seat.
Push gently until you hear a click
on both sides.
WARNING: The bumper is only used for the seat unit; do not use it for carrying the
carry cot._
1110
Assembly / Operating Instructions
Restraints - Harness
1. To secure the child in the harness, place left
hand buckle prong (b) on top of (a).
2. Hold both left hand buckle prongs (a) and (b)
together and insert it into buckle housing (e)
until it snaps into position.
3. Repeat previous steps for right hand buckle
prongs (c) and (d).
4. Once all attached, carefully adjust the harness
straps by pulling each slider (f) until the desired
t is achieved in the lap, shoulder and crotch
straps.
5. To release the buckles, squeeze the top and
bottom prongs (a) and (b), (c) and (d) together
until harness disengages.
CAUTION: Always adjust the harness when
changing the seating position of the child.
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
f
ff
ff
a
b
c
d
e
Top strap
Bottom
strap
To adjust waist strap
1. To loosen waist strap, push up both top and
bottom straps through buckle as circled in
diagram.
2. To place waist strap in desired position, slide
the bottom strap into position then pull the top
strap and tighten into position.
WARNING: Use this harness at all times.
Car Seat Adapter
1. Remove the seat from the frame of
the stroller. Insert the set of plastic
adapters into the slots where the seat
normally sits in position. Push gently
until the adapters ‘click’ and lock
into place. The left adapter should
be placed on the left when facing the
stroller from the front, and the right
adapter on the right when facing the
stroller from the front.
This adaptor is designed for Maxi Cosi Car Seat; to be used with the
following strollers:
bebe care Rverse / Rverse XT / Rverse XLR / Childcare Vogue
IMPORTANT:
Insert car seat into adaptor
1. Insert the Maxi Cosi car seat as per car seat manufacturer’s
instructions by aligning the plastic side parts of the car seat into
the corresponding adaptor.
2. Push the car seat down until it clicks into place.
3. Swing the car seat’s handle down while pressing both grey
levers on the car seat side handle moulds until it locks into
position.
4. Car seat can be attached to stroller frame in either forward
facing or reverse facing.
5. To rotate car seat in opposite direction; rotate the car seat
together with the adaptors and insert them into the side stroller
frame’s slots until it ‘clicks’ and locks into place.
WARNING: Lift the Maxi Cosi Car Seat upwards to ensure that it
is fully engaged and locked before use.
Assembly / Operating Instructions
1312
Assembly / Operating Instructions
To remove car seat from stroller frame
1. Simultaneously swing the car seat’s handle up while pressing
both grey levers on the car seat side handle moulds to release
the car seat.
2. Lift up car seat via the handle.
Folding stroller
NOTE: Both plastic adaptors can remain attached to the stroller frame when folding stroller.
Fold the stroller as per stroller manufacturer’s folding instructions.
To remove adaptor
To release the set of plastic adaptor from stroller, slide the red buttons
on the side of the plastic adaptor and lift them out of the stroller
frame slots.
Tether strap
Ensure tether strap is used at all times. Make sure your hand is fed
through the loop as shown.
How to care for your stroller
Cleaning
To ensure the long-lasting use of your change table, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or
replace if required. To maintain the safety of your change table, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the change table, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bebe Care Passeggino
