Beijer Electronics JetWave 4020 Series Manuale utente

JetWave 4020/4020E Series

Industrial 802.11ac + 802.11n Multi-Radio

Wireless AP

User Manual

V1.1 Aug., 2016

JetWave 4020/4020E Series User Manual

a retrieval system, translated into any language, or transmitted in any form or by any means without

the written permission of the supplier.

About This Manual

This user manual provides the following notes:

1. The Declaration of Conformity policy and manufacturer information.

2. The Safety Precaution and important notification.

3. The technical specification of the product.

4. The instruction on how to install and configure your product.

Please read this document carefully and only trained and qualified personnel should be allowed to

install, replace, or service this equipment.

Conventions

For your attention on important parts, special characters and patterns are used in this manual:

This indicates an important note that you must pay attention to.

The Blue Wording is important note that you must pay attention to.

The Blue Wording with Big Case is very important note you must pay more attention to.

This indicates a warning or caution that you have to abide.

The Red wording is very important you must avoid.

Bold: Indicates the function, important words, and so on.

Note:

Warning:

JetWave 4020/4020E Series User Manual

Declaration of Conformity

R&TTE Directive 1999/5/EC

The product may be operated in all European Union countries. The R&TTE (1995/5/EC) Directive

requires that apparatus bears the CE mark as an attestation of compliance with the R&TTE Directive.

While you see the CE Marking print in our product, it indicates the product comfort to the requirement

of the R&TTE Directive.

We provides formal declaration of R&TTE for Wireless product in our web site, different product may

comfort to different standards of Health & Safety, EMC, Radio and other specific standard. You can

download the formal document of the product in our Web site or apply from our Sales/Technical

people.

The declaration of R&TTE is authorized at the following company and address.

Korenix Technology Co., Ltd.

14F., No.213, Beixin Rd., Xindian Dist., New Taipei City 23143, Taiwan (R.O.C.)

TEL: +886-2-8911-1000

JetWave 4020/4020E Series User Manual

Safety Precautions –JetWave Wireless Product

General Notification

Only operate the device according to the technical specification. You can find the information

from the product datasheet, user manual…etc.

Read the installation instructions before connecting the system to the power source.

If you don’t get exact info you need, you can contact Korenix technical people,

korecare@korenix.com. Only trained and qualified personnel should be allowed to install,

replace, or service this equipment.

The devices are designed for operation with extra-low voltage (SELV). Connect the unit only to

DC power source that complies with the safety extra-low voltage (SELV) requirements in

IEC/EN 60950 based safety standards.

(Not included 110V input model)

Solely connect the power supply that corresponds to the type of your device. For power connection,

make sure the following requirement are met:

The DC power circuit of the product is isolated design circuit. In practical, it is suggested to use

isolated DC power design PSU for field installation. Besides the PSU selection, well

digital/earth grounding is also important before power on the system.

The Power Supply conforms to the overvoltage category I or II.

The output voltage of the AC/DC to DC Power Supply conforms to the range of the input

voltage of the equipment.

The connection cables used are permitted for the specified electronic voltage, current, wire

diameter and temperature range. (Wire Diameter of AC voltage is at least 0.75mm, AWG18.

For DC voltage, it is at least 1.0mm, AWG16.)

Follow the power installing instruction of the user manual, it indicates the input voltage, pin

assignment, connection circuit and notice.

The Power Supply must be well installed, includes grounded and other notices which are

defined in its instruction guide.

Only switch on the supply voltage to the device if the housing is closed, the terminal blocks are

wired up correctly and the terminal blocks are connected.

JetWave 4020/4020E Series User Manual

The equipment must be grounded. Ground the device before connecting the cables, antennas

and power supply. The grounding of the equipment and DC Power Supply may be different in

some applications, then, you must ground them separately.

Contact the appropriate electrical inspection authority or an electrician if you are uncertain that

suitable grounding is available.

PoE (Power over Ethernet) Input:

If the product supports standard PoE Input, please make sure the voltage range of PSE

comforts to the standard PoE request, maximum current and cable resistance of the Ethernet

cable. Since the Ethernet cable may lead voltage drop, the CAT 5 or above standard cable is

suggested, and the maximum Ethernet cable restriction is under 100 meter.

Users MUST use the safety certificated PoE switch/injector with the PoE power input. The

Industrial PoE Switch, attached PoE injector/adapter is recommended.

Environment & Housing

Hot surface. Avoid touching the device while it is operating.

Only operate the device at the specified ambient temperature and humidity. The temperature of

the surrounding air means a distance of up to 5cm from the device. While installing multiple

devices within the cabinet, remains suitable width between the devices is MUST for better heat

dispersing.

Better install the device in the vertical position, with the upper antenna connections pointing

upward, lower antenna pointing downward.

Install the device in a cabinet or in an operating site with limited access, the metal cabinet will

filter the radio signals, use the extended antenna cable and install the external antenna in free

space helps to get better Radio signal.

Only technicians authorized by the manufacturer are permitted to open the housing. Without

the manufacturer permitted, open the housing means the product is not warrantied and no

responsible for any unexpected risk.

JetWave 4020/4020E Series User Manual

Installation

If you are installing the wireless equipment in the field box or outdoor area, for your safety as well as

others’, please seek assistance from a professional installer who has received safety training on the

hazards involved. Keep safety as well as performance in mind when selecting your installation site,

especially where there are electric power and phone lines.

Please note the following things as well:

Do not use a metal ladder;

Do not work on a wet or windy day;

Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.

If you are installing the equipment in the indoor office or factory, be aware of the power source

and grounding must be well installed. The professional Wireless IT Engineer can provide

service for AP location, channel and field plan to get better performance and coverage.

Connect the equipment which meets the IP degree of protection requirements for the

application case.

Read the Radio output power, receiver sensitivity, antenna gain specification before installing.

The shipped products and antenna comforts to the R&TTE and allowed to be used in all

European countries. You can read the related technical specification from the product

datasheet or user manual.

When installing external antennas, the Radio Output power and antenna gain value must be

allowed according to the regulations of the country.

When the system is operational with high gain antenna, avoid standing directly in front of it.

Strong RF fields are present when the transmitter is on.

When the system is operational with high gain antenna in short distance, adjust the radio

output lower. Strong output power plus high gain antenna is not good installation for short

distance transmission.

You are responsible for undertaking suitable lightning protection.

Install over voltage protector devices on every outdoor Ethernet cable.

Protect each antenna installed outside with lightening protection devices, ex: lightening

arrester.

Note that Field EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.

JetWave 4020/4020E Series User Manual

Content

Chapter 1 Introduction......................................................................................................................... 2

1.1 Introduction.............................................................................................................................. 2

1.2 JetWave 4020 Series Appearance .......................................................................................... 3

1.3 JetWave 4020 Major Features................................................................................................. 3

1.4 JetWave 4020E Series Appearance........................................................................................ 4

1.5 JetWave 4020E Major Features.............................................................................................. 5

1.6 JetWave 4020/4020E Product Dimension............................................................................... 6

1.7 Product Package ..................................................................................................................... 6

Chapter 2 Hardware Installation......................................................................................................... 9

2.1 Professional Installation Required........................................................................................... 9

2.1.1 Safety Precautions ........................................................................................................... 9

2.2 Power Installation ...................................................................................................................11

2.2.1 DC Input ..........................................................................................................................11

2.2.2 Powered by PoE..............................................................................................................11

2.2.3 Connect both DC input and PoE.................................................................................... 12

2.3 I/O Configuration.................................................................................................................... 13

2.3.1 Wiring your Ethernet Port............................................................................................... 13

2.3.2 USB + RS-232 Console.................................................................................................. 14

2.3.3 Vent ................................................................................................................................ 14

2.3.4 Ground............................................................................................................................ 15

2.4 WIFI Antenna......................................................................................................................... 16

2.4.1 MIMO & Dual Polarization.............................................................................................. 16

2.4.2 Antenna Socket.............................................................................................................. 18

2.4.3 Antenna Installation........................................................................................................ 19

2.4.4 Default Embedded WIFI Antenna Specification: ............................................................ 20

2.5 Mounting................................................................................................................................ 22

2.5.1 Mounting the AP............................................................................................................. 22

2.5.2 Mounting the N-Type external antenna.......................................................................... 26

2.5.3 Mounting the SMA external antenna:............................................................................. 26

JetWave 4020/4020E Series User Manual

2.6 Using the External Antenna................................................................................................... 27

Chapter 3 Prepare for Management ................................................................................................. 30

3.1 Basic Factory Default Settings .............................................................................................. 30

3.2 System Requirements ........................................................................................................... 32

3.3 How to Login the Web-based Interface................................................................................. 33

3.4 Fail to login the Web GUI....................................................................................................... 34

3.5 How to login the CLI .............................................................................................................. 34

3.6 Discovery Utility –Korenix View Utility.................................................................................. 36

Chapter 4 Web GUI Configuration.................................................................................................... 38

4.1 Status..................................................................................................................................... 38

4.1.1 Information...................................................................................................................... 38

4.1.2 Network Flow (Statistics)................................................................................................ 39

4.1.3 ARP Table....................................................................................................................... 40

4.1.4 DHCP Client List............................................................................................................. 40

4.1.5 Association List............................................................................................................... 41

4.2 System................................................................................................................................... 42

4.2.1 Basic Settings................................................................................................................. 42

4.2.2 IP Settings ...................................................................................................................... 43

4.2.3 RADIUS Settings............................................................................................................ 45

4.2.4 Time Settings.................................................................................................................. 46

4.2.5 Traffic Shaping................................................................................................................ 47

4.2.6 Outbound Firewall .......................................................................................................... 47

4.2.7 Inbound Firewall............................................................................................................. 50

4.2.8 NAT Settings................................................................................................................... 51

4.3 Routing .................................................................................................................................. 54

4.3.1 Status ............................................................................................................................. 54

4.3.2 Static Route.................................................................................................................... 54

4.3.3 RIP.................................................................................................................................. 55

4.4 Wireless................................................................................................................................. 58

4.4.1 Basic Settings................................................................................................................. 58

JetWave 4020/4020E Series User Manual

4.4.2 Security Settings............................................................................................................. 62

4.4.3 Advanced Settings ......................................................................................................... 64

4.4.4 Access Control ............................................................................................................... 66

4.5 VPN........................................................................................................................................ 68

4.5.1 Status ............................................................................................................................. 69

4.5.2 OpenVPN Client............................................................................................................. 69

4.5.3 OpenVPN Server............................................................................................................ 71

4.5.4 Port Forwarding.............................................................................................................. 74

4.5.5 VPN Certificate............................................................................................................... 75

4.5.6 IPSec.............................................................................................................................. 75

4.6 Management.......................................................................................................................... 78

4.6.1 Remote Setting............................................................................................................... 78

4.6.2 SMTP Configuration....................................................................................................... 81

4.6.3 Login Settings................................................................................................................. 82

4.6.4 Firmware Upgrade.......................................................................................................... 82

4.6.5 Configuration File ........................................................................................................... 83

4.6.6 Certificate File................................................................................................................. 85

4.6.7 WLAN Controller............................................................................................................. 85

4.6.8 Remote IP Scan ............................................................................................................. 86

4.6.9 Topology Discovery (LLDP)............................................................................................ 86

4.7 Tools ...................................................................................................................................... 88

4.7.1 System Log..................................................................................................................... 88

4.7.2 Site Survey..................................................................................................................... 88

4.7.3 Ping Watchdog ............................................................................................................... 89

4.7.4 Data Rate Test................................................................................................................ 90

4.7.5 Antenna Alignment ......................................................................................................... 91

4.7.6 Ping ................................................................................................................................ 92

4.8 Main Entry.............................................................................................................................. 93

4.8.1 Save ............................................................................................................................... 93

4.8.2 Logout............................................................................................................................. 93

4.8.3 Reboot............................................................................................................................ 93

JetWave 4020/4020E Series User Manual

Chapter 5 Configuration –SNMP, CLI, View Utility......................................................................... 95

5.1 SNMP .................................................................................................................................... 95

5.1.1 What is SNMP?.............................................................................................................. 95

5.1.2 Management Information Base (MIB): ........................................................................... 96

5.1.3 MIB Tree in NMS............................................................................................................ 97

5.2 Command Line Interface (CLI) ............................................................................................ 100

5.2.1 SHOW Command Set: ................................................................................................. 101

5.2.2 Set Command Set:....................................................................................................... 102

5.2.3 List Command Set:....................................................................................................... 103

5.2.4 Delete Command Set:.................................................................................................. 104

5.3 Korenix View Utility.............................................................................................................. 105

5.3.1 Device Discovery:......................................................................................................... 105

5.3.2 Basic Tools Shortcut:.................................................................................................... 106

5.3.3 Wireless Panel.............................................................................................................. 107

5.4 Korenix Mobile Manager...................................................................................................... 109

Chapter 6 Troubleshooting ..............................................................................................................111

6.1 General Question..................................................................................................................111

6.1.1 How to know the MAC address of theAP? ...................................................................111

6.1.2 What if I would like to reset the unit to default settings?...............................................111

6.1.3 Why can not access the Web-based management interface?......................................111

6.2 Wireless................................................................................................................................112

6.2.1 What if the wireless connection is not stable after associating with an AP under wireless

client mode?.................................................................................................................................112

6.2.2 What if the wireless connection performance is not good, how to improve it? .............112

6.3 Appendix...............................................................................................................................113

6.3.1 ASCII.............................................................................................................................113

6.3.2 RSSI Conversion...........................................................................................................114

6.3.3 M12 Connector Pin Assignment....................................................................................116

Revision History................................................................................................................................118

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Beijer Electronics Punto di accesso wireless

Beijer Electronics

Beijer Electronics korenix JetWave 2212X/S Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente