Belden HIRSCHMANN MSP30 Manuale utente

Installation MSP/MSM

Release

04/2023

Technical support

https://hirschmann-support.belden.com

User Manual

Installation

MICE Switch Power - MSP30/32/40/42

MICE Switch Media modules - MSM20/22/24/40/42/46/50/60

2023-04-05 Installation MSP/MSM

Release

04/2023

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at:

https://www.doc.hirschmann.com

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Installation MSP/MSM

Release

04/2023 3

Contents

Important information 7

Safety instructions 9

About this manual 24

Key 25

1 Description 26

1.1 General device description 26

1.1.1 Basic device 26

1.1.2 Media modules 26

1.2 Device name and product code 27

1.3 Device views 33

1.3.1 Basic device 33

1.3.2 Media modules 37

1.4 Number of ports and connections 46

1.5 Power supply 48

1.5.1 Supply voltage with characteristic value C 48

1.5.2 Supply voltage with the characteristic value P 48

1.6 SFP Transceiver 48

1.7 Ethernet ports 48

1.8 Display elements 51

1.8.1 Device status 52

1.8.2 Digital input 53

1.8.3 MSM20 media modules 54

1.8.4 MSM40 media modules 55

1.8.5 MSM22, MSM42 and MSM46 media modules 56

1.8.6 MSM50 media modules 57

1.8.7 MSM60 media modules 58

1.8.8 MSM24 I/O media module 59

1.9 Management interfaces 60

1.9.1 V.24 interface (external management) 60

1.9.2 SD card interface (optional) 60

1.9.3 USB interface 61

4Installation MSP/MSM

Release

04/2023

1.10 Input/output interfaces 62

1.10.1 Signal contact 62

1.10.2 Digital input 62

2 Installation 63

2.1 Checking the package contents 63

2.2 Installing the SD card (optional) 63

2.3 Installing and grounding the device 64

2.3.1 Installing the device onto the DIN rail 64

2.3.2 Mounting on a flat surface 65

2.3.3 Grounding the device 65

2.4 Connecting the terminal blocks 66

2.4.1 Supply voltage with characteristic value C 66

2.4.2 Supply voltage with the characteristic value P 67

2.4.3 Signal contact 68

2.5 Connecting the ferrite 68

2.6 Installing terminal blocks, switching on the supply voltage 69

2.7 Installing media modules 69

2.7.1 Device variants featuring customer-specific version

with the characteristic value HH 70

2.7.2 Device variants featuring customer-specific version

with the characteristic value HX 71

2.7.3 Connecting the external PoE supply voltage of media

module MSM46 71

2.8 Connecting an I/O module 72

2.8.1 Connecting actuators and sensors 72

2.9 Installing an SFP transceiver (optional) 74

2.10 Connecting data cables 74

2.10.1 10/100 Mbit/s twisted pair port 76

2.10.2 10/100/1000 Mbit/s twisted pair port 76

2.10.3 100 Mbit/s F/O port 76

2.10.4 100/1000 Mbit/s F/O port 76

2.10.5 1/2.5 Gbit/s F/O port 76

2.10.6 1/10 Gbit/s F/O port 76

3 Basic Settings 77

3.1 First log in (password change) 77

Installation MSP/MSM

Release

04/2023 5

4 Monitoring the ambient air temperature 78

5 Upgrading Software 79

6 Maintenance and service 80

7 Disassembly 81

7.1 Removing an SFP transceiver (optional) 81

7.2 Removing a media module 81

7.2.1 Device variants featuring customer-specific version

with the characteristic value HH 82

7.2.2 Device variants featuring customer-specific version

with the characteristic value HX 83

7.3 Removing the device 83

7.3.1 Device variants featuring customer-specific version

with the characteristic value HH 84

7.3.2 Device variants featuring customer-specific version

with the characteristic value HX 84

8 Technical data 85

8.1 General technical data 85

8.2 Digital input 88

8.3 Digital output 89

8.4 24 V DC auxiliary voltage (AUX) 89

8.5 External PoE power supply (MSM46) 89

8.6 Dimension drawings 90

8.7 EMC and immunity 95

8.8 Power consumption/power output 98

8.9 Network range 100

8.9.1 10/100/1000 Mbit/s twisted pair port 100

8.9.2 Fast Ethernet SFP transceiver 101

8.9.3 Bidirectional Fast Ethernet SFP transceiver 102

8.9.4 Gigabit Ethernet SFP transceiver 102

8.9.5 Bidirectional Gigabit Ethernet SFP transceiver 104

8.9.6 2.5 Gigabit Ethernet SFP transceiver 105

8.9.7 10 Gigabit Ethernet SFP+ transceiver 105

6Installation MSP/MSM

Release

04/2023

9 Scope of delivery, order numbers and

accessories 107

9.1 Scope of delivery 107

9.2 Accessories 108

10 Underlying technical standards 111

A Further support 112

Installation MSP/MSM

Release

04/2023 7

Important information

Note: Read these instructions carefully, and familiarize yourself with the

device before trying to install, operate, or maintain it. The following notes may

appear throughout this documentation or on the device. These notes warn of

potential hazards or call attention to information that clarifies or simplifies a

procedure.

Symbol explanation

This is a general warning symbol. This symbol alerts you to

potential personal injury hazards. Observe all safety notes that

follow this symbol to avoid possible injury or death.

If this symbol is displayed in addition to a safety instruction of the

type “Danger” or “Warning”, it means that there is a danger of

electric shock and failure to observe the instructions will

inevitably result in injury.

This symbol indicates the danger of hot surfaces on the device.

In connection with safety instructions, non-observance of the

instructions will inevitably result in injuries.

DANGER

DANGER draws attention to an immediately dangerous situation, which will

inevitably result in a serious or fatal accident if not observed.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION

CAUTION indicates a possible danger which, if not avoided, may result in

minor injuries.

8Installation MSP/MSM

Release

04/2023

NOTICE

NOTICE provides information about procedures that do not involve the risk

of injury.

Installation MSP/MSM

Release

04/2023 9

Safety instructions

General safety instructions

You operate this device with electricity. Improper usage of the device

entails the risk of physical injury or significant property damage. The

proper and safe operation of this device depends on proper handling

during transportation, proper storage and installation, and careful

operation and maintenance procedures.

Before connecting any cable, read this document, and the safety

instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a damaged

or malfunctioning device, turn off the supply voltage and return the

device to Hirschmann for inspection.

National and international safety regulations

Verify that the electrical installation meets local or nationally applicable

safety regulations.

Certified usage

Use the product only for the application cases described in the

Hirschmann product information, including this manual.

Operate the product only according to the technical specifications.

See “Technical data” on page 85.

Connect to the product only components suitable for the requirements

of the specific application case.

WARNING

UNCONTROLLED MACHINE ACTIONS

To avoid uncontrolled machine actions caused by data loss, configure all

the data transmission devices individually.

Before you start any machine which is controlled via data transmission, be

sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

10 Installation MSP/MSM

Release

04/2023

Qualification requirements for personnel

Only allow qualified personnel to work on the device.

Qualified personnel have the following characteristics:

Qualified personnel are properly trained. Training as well as practical

knowledge and experience make up their qualifications. This is the

prerequisite for grounding and labeling circuits, devices, and systems

in accordance with current standards in safety technology.

Qualified personnel are aware of the dangers that exist in their work.

Qualified personnel are familiar with appropriate measures against

these hazards in order to reduce the risk for themselves and others.

Qualified personnel receive training on a regular basis.

Installation site requirements

Verify that there is at least 10 cm (4 in) of space above and below the

device.

Verify that there is at least 2 cm (0.8 in) of space on the right and left

sides of the device.

If ambient temperatures are ≥45 °C (≥113 °F), exclusively install the

device in “restricted access locations” according to IEC 60950-1.

Strain relief

Note: If the strain relief is insufficient, there is a potential risk of torsion,

contact problems and creeping interruptions.

Relieve the connection points of cables and lines from mechanical

stress.

Design strain reliefs in such a way that they help prevent any

mechanical damage to cables, wires or conductors caused by external

influences or their own weight.

To help prevent damage to device connections, connectors and

cables, follow the instructions for proper installation in accordance with

DIN VDE 0100-520:2013-06, sections 522.6, 522.7 and 522.13.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Belden Interruttore

Belden

Belden Hirschmann SPIDER 8TX EEC Manuale utente

Belden

Belden Hirschmann Rail Switch Power Lite Manuale utente

Belden

Belden Hirschmann SPIDER-SL-20-01T1S29999SZ9HHHH Manuale utente

Belden

Belden Hirschmann MACH1000 Series Manuale utente

Belden

Belden Hirschmann MACH104-PoEP Series Manuale utente

Belden

Belden Grass Valley K-Frame Come usare

Belden

Belden HIRSCHMANN RSPE 30 Manuale utente

Belden

Belden Hirschmann RS20 Series Manuale utente

Belden

Belden Hirschmann RED25 Series Manuale utente

Belden

Belden Hirschmann MACH104-PoEP Series Manuale utente

Belden

Belden Hirschmann MACH104 Series Guida utente

Belden

Belden Hirschmann RS20 Series Manuale utente

Belden

Belden HIRSCHMANN OCTOPUS OS20 Series Manuale utente

Belden

Belden HIRSCHMANN EESX Series Guida rapida alla configurazione

Belden

Belden HIRSCHMANN MACH 4000 Series Manuale utente

Belden

Belden MAMMUTHUS MTM2800-PSU120 Manuale utente

Belden

Belden HIRSCHMANN MACH 100 Series Manuale utente

Belden

Belden Hirschmann DRAGON MACH Series Manuale utente

Belden

Belden Hirschmann SPIDER II 8TX Manuale utente

Belden

Belden Hirschmann RS20 U Series Manuale utente

Belden

Belden HIRSCHMANN BRS20 Manuale utente

Belden

Belden Hirschmann HiOS-2S Manuale utente

Belden

Belden Hirschmann SPIDER-SL-20-08T1999999SY9HHHH Manuale utente

Belden

Belden Hirschmann RS20 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente