Belkin F5D9230-4V4 Manuale utente

User’s Manual

Wireless G Plus MIMO Router

F5D9230-4

The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in

an information retrieval system, translated into any language, or transmitted in any form or by any

means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the

prior written permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective

companies. They are used for identification purpose only. Specifications are subject to be changed

without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against radio interference in a commercial environment. This equipment can generate, use and radiate

radio frequency energy and, if not installed and used in accordance with the instructions in this manual,

may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause interference, in which case the user, at his own expense, will be required to take

whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility, EN

55022/A1 Class B.

The specification is subject to change without notice.

Table of Contents

Chapter 1 Introduction.............................................................................. 3

Functions and Features ........................................................................ 3

Packing List ......................................................................................... 5

Chapter 2 Hardware Installation............................................................... 6

2.1 Panel Layout .................................................................................. 6

2.2 Procedure for Hardware Installation.............................................. 7

Chapter 3 Network Settings and Software Installation............................. 9

3.1 Make Correct Network Settings of Your Computer....................... 9

Chapter 4 Configuring Wireless Broadband Router............................... 10

4.1 Login to Configure from Wizard ................................................. 11

4.2 Status............................................................................................ 13

4.4 Basic Setting ................................................................................ 14

4.5 Forwarding Rules......................................................................... 32

4.6 Security Settings .......................................................................... 36

4.7 Advanced Settings........................................................................ 50

4.8 Toolbox ........................................................................................ 63

Appendix A TCP/IP Configuration for Windows 95/98 ........................ 68

Appendix B 802.1x Setting..................................................................... 73

Appendix C WPA-PSK and WPA.......................................................... 79

Appendix D FAQ and Troubleshooting.................................................. 92

What can I do when I have some trouble at the first time?...... 92

How do I connect router by using wireless?............................... 95

Congratulations on your purchase of this outstanding Wireless Broadband Router. This product is

specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution

for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for

installing and configuring this product can be found in this manual. Before you install and use this

product, please read this manual carefully for fully exploiting the functions of this product.

Functions and Features

Router Basic functions

zAuto-sensing Ethernet Switch

Equipped with a 4-port auto-sensing Ethernet switch.

zWAN type supported

The router supports some WAN types, Static, Dynamic, PPPoE , PPTP ,L2TP, Dynamic IP

with Road Runner.

zFirewall

All unwanted packets from outside intruders are blocked to protect your Intranet.

zDHCPserver supported

All of the networked computers can retrieve TCP/IP settings automatically from this product.

zWeb-based configuring

Configurable through any networked computer’s web browser using Netscape or Internet

Explorer.

zVirtual Server supported

Enable you to expose WWW, FTP and other services on your LAN to be accessible to

Internet users.

zUser-Definable Application Sensing Tunnel

User can define the attributes to support the special applications requiring multiple

connections, like Internet gaming, video conferencing, Internet telephony and so on, then this

product can sense the application type and open multi-port tunnel for it.

zDMZ Host supported

Lets a networked computer be fully exposed to the Internet; this function is used when

special application sensing tunnel feature is insufficient to allow an application to function

correctly.

zStatistics of WAN Supported

Enables you to monitor inbound and outbound packets

Wireless functions

zHigh speed for wireless LAN connection

Up to 54Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing

(OFDM).

zRoaming

Provides seamless roaming within the IEEE 802.11b (11M) and IEEE 802.11g (54M)

WLAN infrastructure.

zIEEE 802.11b compatible (11M)

Allowing inter-operation among multiple vendors.

zIEEE 802.11g compatible (54M)

Allowing inter-operation among multiple vendors.

zAuto fallback

54M, 48M, 36M, 24M, 18M, 12M, 6M data rate with auto fallback in 802.11g mode.

11M, 5.5M, 2M, 1M data rate with auto fallback in 802.11b mode.

Security functions

zPacket filter supported

Packet Filter allows you to control access to a network by analyzing the incoming and

outgoing packets and letting them pass or halting them based on the IP address of the source

and destination.

zDomain Filter Supported

Let you prevent users under this device from accessing specific URLs.

zURLBlocking Supported

URL Blocking can block hundreds of websites connection by simply a keyword.

zVPN Pass-through

The router also supports VPN pass-through.

z802.1X supported

When the 802.1X function is enabled, the Wireless user must authenticate to this router first

to use the Network service.

zSupport WPA-PSK and WPA version 1 and 2

When the WPA function is enabled, the Wireless user must authenticate to this router first to

use the Network service

zSPI Mode Supported

When SPI Mode is enabled, the router will check every incoming packet to detect if this

packet is valid.

zDoSAttack Detection Supported

When this feature is enabled, the router will detect and log the DoS attack comes from the

Internet.

Advanced functions

zSystem time Supported

Allow you to synchronize system time with network time server.

zE-mailAlert Supported

The router can send its info by mail.

zDynamic dns Supported

At present,the router has 3 ddns.dyndns,TZO.com and dhs.org.

zSNMP Supported

The router supports basic SNMP function.

zRouting Table Supported

Now, the router supports static routing.

zSchedule Rule supported

Customers can control some functions, like virtual server and packet filters when to access or

when to block.

Other functions

zUPNP(Universal Plug and Play)Supported

The router also supports this function. The applications: X-box, Msn Messenger.

Packing List

zWireless broadband router unit

zInstallation CD-ROM

zPower adapter

zCAT-5 UTP Fast Ethernet cable

2.1 Panel Layout

2.1.1. Front Panel

Figure 2-1 Front Panel

LED: Ports:

Port Description

PWR Power inlet

WAN the port where you will connect your cable (or DSL) modem or

Ethernet router.

Port 1-4 the ports where you will connect networked computers and other

devices.

2.1.2. Rear Panel

Figure 2-2 Rear Panel

LED:

LED Function Color Status Description

Power Power

indication Green On Power is being applied to this product.

Status System

status Green Blinking Status is flashed once per second to indicate system is

alive.

WAN WAN port

activity Green On The WAN port is linked.

Blinking The WAN port is sending or receiving data.

WLAN

Wireless

activity

Green Blinking Sending or receiving data via wireless

Link.

1~4 Link status Green On An active station is connected to the corresponding

LAN port.

Blinking The corresponding LAN port is sending or receiving

data.

Speed

10/100

Data Rate

Green On Data is transmitting in 100Mbps on the corresponding

LAN port.

Reset To reset system settings to factory defaults

2.2 Procedure for Hardware Installation

2. Decide where to place your Wireless Broadband Router

You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount it

on a wall. For optimal performance, place your Wireless Broadband Router in the center of your

office (or your home) in a location that is away from any potential source of interference, such as a

metal wall or microwave oven. This location must be close to power and network connection.

2. Setup LAN connection

a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one

of the LAN ports of this product.

b. Wireless LAN connection: locate this product at a proper position to gain the best transmit

performance.

Figure 2-3 Setup of LAN and WAN connections for this product.

3. Setup WAN connection

Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet

backbone. Figure 2-3 illustrates the WAN connection.

4. Power on

Connecting the power cord to power inlet and turning the power switch on, this product will

automatically enter the self-test phase. When it is in the self-test phase, the indicators M1 will be

lighted ON for about 10 seconds, and then M1 will be flashed 3 times to indicate that the self-test

operation has finished. Finally, the M1 will be continuously flashed once per second to indicate

that this product is in normal operation.

To use this product correctly, you have to properly configure the network settings of your computers

and install the attached setup program into your MS Windows platform (Windows 95/98/NT/2000).

3.1 Make Correct Network Settings of Your Computer

The default IP address of this product is 192.168.123.254, and the default subnet mask is

255.255.255.0. These addresses can be changed on your need, but the default values are used in this

manual. If the TCP/IP environment of your computer has not yet been configured, you can refer to

Appendix A to configure it. For example,

1. configure IP as 192.168.123.1, subnet mask as 255.255.255.0 and gateway as

192.168.123.254, or more easier,

2. configure your computers to load TCP/IP setting automatically, that is, via DHCP server of

this product.

After installing the TCP/IP communication protocol, you can use the ping command to check if your

computer has successfully connected to this product. The following example shows the ping procedure

for Windows 95 platforms. First, execute the ping command

ping 192.168.123.254

If the following messages appear:

Pinging 192.168.123.254 with 32 bytes of data:

Reply from 192.168.123.254: bytes=32 time=2ms TTL=64

a communication link between your computer and this product has been successfully established.

Otherwise, if you get the following messages,

Pinging 192.168.123.254 with 32 bytes of data:

Request timed out.

There must be something wrong in your installation procedure. You have to check the following items

in sequence:

1. Is the Ethernet cable correctly connected between this product and your computer?

Tip: The LAN LED of this product and the link LED of network card on your computer must be

lighted.

2. Is the TCP/IP environment of your computers properly configured?

Tip: If the IP address of this product is 192.168.123.254, the IP address of your computer must

be 192.168.123.X and default gateway must be 192.168.123.254.

This product provides Web based configuration scheme, that is, configuring by your Web browser,

such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS

Windows, Macintosh or UNIX based platforms.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Belkin Router di rete

Belkin

Belkin F5D52314 - Cable/DSL Gateway Router Manuale utente

Belkin

Belkin F6D4630-4v2 Manuale utente

Belkin

Belkin SURF N300 Manuale utente

Belkin

Belkin INVENTEL CONFIG XP Istruzioni per il montaggio

Belkin

Belkin OmniView 5000HQ Manuale utente

Belkin

Belkin Wireless Gplus Notebook Card Manuale utente

Belkin

Belkin F5D7330 Manuale utente

Belkin

Belkin F9K1113 v5 Manuale utente

Belkin

Belkin F5D7330 Manuale utente

Belkin

Belkin Basic Manuale utente

Belkin

Belkin P73956EH Manuale utente

Belkin

Belkin AC900 DB Manuale utente

Belkin

Belkin F1PI242EGAU Manuale utente

Belkin

Belkin PARTAGE DE DOSSIER AVEC UN ROUTEUR Istruzioni per il montaggio

Belkin

Belkin High Speed ADSL2+ Manuale utente

Belkin

Belkin F5D8633-4A Manuale utente

Belkin

Belkin 802.11g Wireless Ethernet Bridge Manuale utente

Belkin

Belkin N Wireless Manuale utente

Belkin

Belkin F5D7230 Guida di riferimento

Belkin

Belkin WIRELESSBRIDGE GERMAN Guida rapida

Belkin

Belkin F5D5230-F Manuale utente

Belkin

Belkin F9K1104 Manuale utente

Belkin

Belkin F5D8636-4 v2 Manuale utente

Belkin

Belkin F5D5230-4 Istruzioni di installazione e manutenzione

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza