Bemodern 2983 Manuale utente

16” and 22” 75mm Electric Fire

Instructions for use

Patent pending

UK Registered Design

R1 Jan 2020 200797_1

Complete with Remote Control

Model 2983 / 2921

Contents

Tech Specs 3

Safety Info 4 –5

Fixing the appliance 6 –7

Attaching the Trim 7

User Instructions 8 - 13

Maintenance 14

General information 15

Guarantee 16

200797_1

Technical Specification

Model No.: 2893 / 2921

Supply Voltage: AC 230-240V 50Hz

Maximum power consumption: 2KW

Power for flame effect: 13W (LED 5W + Motor for flame 8W)

Heat Output:

Nominal heat output (Pnom): 2KW

Minimum heat output (indicative) (Pmin): 1KW

Maximum continuous heat output (Pmax): 2KW

Auxiliary Electricity Consumption:

At nominal heat output (elmax): 14W

At minimum heat output (elmin): 14W

In standby mode (elSB): 0.48 W

Single

stage heat output and no room temperature control No

Two

or more manual stages, no room temperature control No

With

mechanic thermostat room temperature control No

With

electronic room temperature control No

Electronic

room temperature control plus day timer No

Electronic

room temperature control plus week timer Yes

Room

temperature control, with presence detection No

Room

temperature control, with open window detection No

With

distance control option No

With

adaptive start control Yes

With

working time limitation No

With

black bulb sensor No

Type of heat output / room temperature control

Other Control Options

20797_1

Safety Information

Read all of the instructions carefully before using the appliance.

For indoor use only This appliance is not suitable for use outside the house and only

suitable for well insulated spaces or occasional use.

Do not use this appliance in the immediate surroundings of a bath, a shower or a

swimming pool or any wet area

This fire must not be located immediately below a socket-outlet.

This appliance must be earthed.

This appliance must not be supplied through an external switching device, such as a

timer, or connected to the circuit that is regularly switched on and off by utility in order

to avoid a hazard due to the inadvertent resetting of the thermal cut out.

A non-rewirable plug fitted with a 13A fuse is supplied. Should the fuse or plug need

replacing, and you are competent to do so, it must be replaced with a 13A fuse or

plug being 13A BS1363A approved.

If the power cord is damaged, it must be repaired by the manufacturer, its authorised

service centre or professional person.

The meaning of this symbol is “DO NOT COVER”. Warning: in order to avoid

overheating, do not allow the appliance to be covered or let the air inlet / outlet to

become obstructed. Please note the warning symbol on the appliance (see above).

To reduce the risk of fire, keep textiles, curtains, or any other flammable material a

minimum distance of 1 meter from the air outlet.

Keep the power cord away from hot surfaces and hot conditions. Do not route the

power lead in front of the appliance.

Do not use this fire in rooms that have explosive gas in them (for example petrol), or if

you are using solvents, glue, aerosol spray or in flammable paints, as these may catch

fire.

This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

200797_1

Safety Information (continued)

Children and vulnerable people must be supervised at all times when using this

appliance, as some parts can become very hot and cause burns.

Do not use this appliance in small rooms when they are occupied by persons not

capable of leaving the room on their own, unless constant supervision is provided.

Cleaning and user maintenance shall not be made by children without supervision.

Children aged from 3 years and less than 8 years only can switch on / off the

appliance provided that it has been placed or installed in its intended normal

operating position and instructions and supervisions concerning the safe way of the

use of the appliance are offered. Children aged from 3 years and less than 8 years

shall not plug in, regulate and clean the appliance or perform user maintenance.

This appliance shall not be played with by children.

Children of less than 3 years should be kept away unless continuously supervised.

200797_1

6200797_1

Securing the Appliance

Prior to installation / securing the fire select the preferred fixing method.

A. Securing the fire into position using the fixing holes in the rebate stops.

B. Securing the fire using the back panel clamp.

Back panel / cavity opening size

Model A B C

Model 2893 –16” Version 565 413 75 min

Model 2921 - 22” Version 595 570 75 min

Fixing method A.

Position the fire in the back panel opening ensuring it is centralised. Depending on the

back panel medium , mark the hole positions then remove the fire, drill and plug the

holes ensuring the correct fixings are used for the wall medium. *NOTE Fixings are not

supplied. Once fixing holes have been plugged replace the fire and secure in position

via the holes in the rebate stops.

Rebate stops

Fixing Method A

601227_1 7

Place the four 10mm magnets on the rebate stop tabs and position the trim over the

fire magnetically securing it to the fire and holding it in position.

Fixing method B.

Loosely attach the back panel clamp to the top of the fire as shown below in Figure 1.

Hook the clamp under the back panel so it site behind the panel and centralise the fire

in position. Once in the correct position hold the fire against the back panel and pull

the bracket forwards Figure 2. Tighten the bracket screws to secure the fire in position

Securing the Appliance

Figure 1 Figure 2

Attaching the Trim

User Instructions

WARNING! Do not operate the appliance if it is damaged or has malfunctioned. If you

suspect the appliance is damaged or has malfunctioned call a qualified service

engineer to inspect the appliance, and replace any part of the electrical system if

necessary, before reuse.

WARNING! To reduce the risk of fire, keep textiles, curtains, or any other flammable

material a minimum distance of 1 meter from the air outlet.

MAKE SURE the plug fits tight in the outlet. Faulty wall outlet connections or loose plugs

can cause the outlet to overheat.

Do not disconnect the power at the mains supply whilst the appliance is running. Use

the functions on the remote to turn the fire off and ensure the mains switch has been

moved to the off position before disconnecting.

PREPARATION FOR USE

The appliance can be operated by both remote control and the manual controls on

the appliance. NOTE: To use either the remote or the manual functions the main

power switch must be in the ‘ON’ position. (See below)

Batteries

Ensure that the handset batteries are new and inserted correctly.

Main Power Switch

The mains power switch is located on the control panel behind the door of the stove.

This needs to be switched ON before operating either the remote or manual controls.

A long beep will be heard to indicate the fire is ready for use.

200797_1

User Instructions Continued

Manual control panel

200797_1

Use the ON / OFF switch to power on the heater (set it to standby mode).

In standby mode, the heater can be operated either manually by the switches

located behind the fret or by the supplied remote control.

Heater powered off

Heater powered on, set to standby

mode

Press to switch the flame

effect

ON / OFF

Press and hold to toggle

between

5 different flame effect colours

Press once to activate low level

heating(1000W)

Press twice to activate high level

heating(2000W)

Press three times to switch off

heating

Press to toggle between 7

different fuel bed effect colours

BACKLIGHT

Main

Power

Switch

Appliance Control

Panel

NOTE: The heater should be powered on using the Main Power switch before it can be

operated using remote control

User Instructions Continued

Remote control operation

200797_1

The remote control requires 2 x AAA size batteries.

Open the battery compartment. Pull tab downwards and lift out the cover, insert the

batteries noting the polarity indicated in the battery compartment.

Keep batteries out of reach of children.

Remote control operations are identical to the functions on the control panel.

The remote control must be pointed directly at the sensor on control pad.

Switches the appliance on

Switches the appliance into

standby mode

Set day / time

Decrease temperature

Decrease hour / minute

Confirm selection

Set automatic heating mode

Press once to activate low

heat setting

Press twice to activate high

heat setting

Press three times to switch of heat

Toggle between the 7 different

fuel bed light colours

Toggle between the 5 different

flame effect colours

Timer on / off

Cancel

Menu down (Change day)

Increase temperature

Increase hour / minute

Timer set

Menu up (Change day)

2 x AAA

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali bemodern Camino da interno

bemodern

bemodern BM-06 2 SLIDE Series Manuale utente

bemodern

bemodern EVOLV GAS FIRES 520 Slimline Inset Guida utente

bemodern

bemodern Pryzm 750 Manuale utente

bemodern

bemodern Arteon Pryzm 10003SL Guida

bemodern

bemodern 2603 HE900E Istruzioni per l'installazione

bemodern

bemodern Arteon Pryzm 10003SL Manuale di programmazione

bemodern

bemodern 2668 Manuale utente

bemodern

bemodern Arteon Pryzm 10003SL Guida

bemodern

bemodern 2893 Manuale utente

bemodern

bemodern Arteon Pryzm 10003SL Manuale utente

bemodern

bemodern PRIZM MEDIAVUE Manuale di programmazione

bemodern

bemodern Pryzm 750 Manuale utente

bemodern

bemodern BM-091 2 Series Manuale utente

bemodern

bemodern BM-081 2 Series Manuale utente

bemodern

bemodern ELSIE 960 Manuale utente

bemodern

bemodern BM-121 2 Series Manuale utente

bemodern

bemodern 800CF Manuale utente

bemodern

bemodern 580 Deluxe Inset Manuale utente

bemodern

bemodern 2599M Manuale utente

bemodern

bemodern HANSFORD GRANDE Manuale di programmazione

bemodern

bemodern Pryzm 1000 Manuale utente

bemodern

bemodern Juliette Istruzioni per il montaggio

bemodern

bemodern Beadnell Manuale del proprietario

bemodern

bemodern Pryzm Volta 42 Guida

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo

bemodern 2983 Manuale utente

Manuali Camino da interno popolari di altre marche