bemodern Juliette Istruzioni per il montaggio
Instructions for Assembly & Installation
Juliette Wall Hung Suites
200857R1-06/2023
1
Contents
Technical Specification 2
What’s in the Boxes 2-3
Installation Introduction 3
Installation Preparation 4
Installation- Wall Mounted Suite 5-11
Fuel Bed Layout & Log Positioning 12
Replacing the Glass 13
Maintenance 14
200857R1-06/2023
2
Technical Specification
200857
Fire/ Surround escription Logs
imensions (mm) Unboxed
Weight
A B C E (Kg)
INVISION 1000L
FIRE/ JULIETTE SUITE Timber Suite 5 SML 1211 260 1211 300 596 13.5
INVISION 1250L
FIRE/ JULIETTE SUITE Timber Suite 5 SML & 2
LRG 1461 260 1461 300 596 14.4
FIRE Visible Flame Area (mm)
INVISION 1000L FIRE W1008X H296
INVISION 1250L FIRE W1258 x H296
R1-06/2023
What Is In The Boxes?
Fire/
Surround
escription
Surround Box
Qty escription
INVISION
1000L FIRE
/ JULIETTE
SUITE
1 Surround Top
2 Column Sides
1 Surround Hearth
2 40mm Angle Bracket -fitted
4 16mm Screws -fitted
2 Wall Hooks
4 30mm Dome head Screws
Fire/
Surround
escription
Surround Box
Qty escription
INVISION
1250L FIRE
/ JULIETTE
SUITE
1 Surround Top
2 Column Sides
1 Surround Hearth
2 40mmAngle Brackets -fitted
4 16mm Screws -fitted
2 Wall Hooks
4 30mm Dome head Screws
3
200857
What Is In The Boxes? Continued……..
Please ensure that everything is present before commencing the installation. If anything is missing please call
Customer Services on 01914300901 or email us at customerservices@bemodern.co.uk
Fire/
Surround
escription
Boxed Inside the Fire
Quantity escription
INVISION
1000L FIRE
/ JULIETTE
SUITE
5 Small Logs
1 Bag Of Crystals
1 Bag Of Pebbles
Bagged Separately
1 Remote
Control
2 AAA Batteries
1 Fire Operating
Instruction
1 Foam Strip
Supplied Fixed to Fire Rear
1 Wall Hanging
Bracket
Fire/
Surround
escription
Boxed Inside the Fire
Quantity escription
INVISION
1250L FIRE
/ JULIETTE
SUITE
2 Large Logs
5 Small Logs
1 Bag Of Crystals
1 Bag Of Pebbles
Bagged Separately
1 Remote Control
2 AAA Batteries
1 Fire Operating
Instruction
1 Foam Strip
Supplied Fixed to Fire Rear
1 Wall Hanging
Bracket
R1-06/2023
Installation- Introduction
Do not attempt to lift from the centre of the fire, instead lift from under the fire base and front edge of the fire.
See iagram 1.
Note: The Suite is a two adult person lift. A second person will be required to lift and support the pre-assembled
parts during installation.
Before the suite can be installed, consideration will need to be given to routing the power supply to the fire. This
will affect the stages of the installation process. We advise a qualified electrician to conduct any electrical parts of
the installation.
Note: A single socket is required for the operation of the suite.
iagram 1
4200857
Once the 2x Screws and 2x Glass Brackets are removed the Glass can be tilted forward (1) from the top of the fire
and lifted out of the channel at the base of the glass. (2) See diagram 4.
Note: Place the Glass, 2x Glass Brackets and 2x Screws in a safe place, as these will be required later.
Note: Before proceeding further ensure there is power to the Fire (Suite), and it is operating correctly.
Follow the separate fire operating instructions.
The next step is to decide on the installation location and before starting the installation ensure that there is
enough space to install the Suite - See P2, for the product overall sizes.
iagram 4
R1-06/2023
Installation- Preparation
Note: O NOT dispose of the packaging until you have checked and made sure all the parts and fixings listed on
P2 & P3, are present..
Unpack your new Suite & Fire which are boxed separately and require some light assembly. Once the fire is
unpacked the Cardboard Boxes inside the fire need to be removed and the contents checked, as listed on P3.
To do this, unscrew the 2x Screws holding the 2x Glass Brackets in place. There is 1x Screw either side of the fire.
See iagrams 2 & 3.
Note: The instructions are detailed for both 1000 and 1250 Suites- Please familiarise yourself with the model
you have purchased before proceeding further.
iagram 2 iagram 3
5
Installation – Wall Mounted Suite
200857
Once the desired installation height has been determined, lightly mark the position of the bottom edge of the Suite
centrally on the on the wall. Measure up a further 60mm from this position (This is so the line can’t been seen once
the Suite is installed) and lightly mark a vertical line in the centre of the installation area at a length of
approximately 510mm. See iagram 15.
Note: Consider once installed the distance from the bottom edge of the Suite to the top of the Wall Mount
Bracket is 526mm. The top of the surround is approx. 71mm above this. See iagram 5.
iagram 6
iagram 5
Suite Positioning - The Wall Mounted Suite may be positioned at any desired height on the wall.
R1-06/2023
526 71
INSTALLATION AREA
CEILING LEVEL
FLOOR LEVEL
CENTRE LINE
BOTTOM E GE
OF THE SUIT
510
60
60
6
Installation- Wall Mounted Suite Continued……..
200857
Working from the previously marked line indicating the bottom edge of the Suite and using a straight edge lightly
mark a horizontal line approx. 300mm either side of the previously marked centre line at a height of 466mm.
See iagram 7.
Once marked, drill the fixing positions. Depending on the wall medium, it may be necessary to plug the drilled holes.
See P14 ‘Important Note’.
Finally screw and secure the Wall Mount Bracket to the wall using suitable screws. See P14 ‘Important Note’.
See iagram 9.
Locate the Wall Mount Bracket- (screwed to the rear of the fire). Measure and lightly mark the centre of the Wall
Mount Bracket and offer the top of the Wall Mount Bracket up to the previously drawn horizontal line, level and
mark the fixing positions in the bracket on the wall behind. See iagram 8.
iagram 8 iagram 9
iagram 7
R1-06/2023
INSTALLATION AREA
CEILING LEVEL
FLOOR LEVEL
CENTRE LINE
BOTTOM E GE
OF THE SUIT
466
300 300
Note: The Fire is a two adult person lift.
Note: The power cable needs be routed to the rear of the Suite. Care must be taken not to crush or damage the
cable when positioning the Suite. Before proceeding further ensure the power cable is connected to a power
supply. See iagram 18.
7
Installation- Wall Mounted Suite Continued……..
200857
Lifting the Fire as described on P3, offer the Fire back to the wall approx. 90mm above the top of the Wall Mount
Bracket and lower the Fire parallel with the wall into position. When lowering try to make sure the ‘prongs’ on the
Wall Mount Bracket engage with the slots on the back of the Fire. See iagram 12 & 13.
If necessary, repeat this step, until you are confident the Fire is fully engaged on the Wall Mount Bracket and if
required centralise in the installation location, there will be some slight adjustment left and right.
iagram 10
iagram 13iagram 12
iagram 11
R1-06/2023
Before hanging the Fire on the wall mount bracket. The two L- Brackets need to be repositioned from the transit
position to the base of the Fire. Unscrew the L-Brackets and refit them as indicated in iagram 10 & 11, onto the
bottom of the Fire.
8
Installation- Wall Mounted Suite Continued……..
200857
Finally, loosen the 4x Screws holding the bottom two L- Brackets, so that the L- Brackets can be positioned up
against the wall. The brackets will hold the fire parallel with the wall. Marking the fixing positions. See iagram 14.
Use a spirit level on the front of the fire to ensure it is plumb.
Mark the fixings positions of the L- Brackets and remove the two L- Brackets from the fire. See iagram 15.
Once removed, drill the fixing positions. Depending on the wall medium, it may be necessary to plug the drilled
holes. See P14 ‘Important Note’.
iagram 15
iagram 14
R1-06/2023
9
Installation- Wall Mounted Suite Continued……..
200857
Finally screw and secure the 2-off L- Brackets back on the fire and then to the wall using suitable screws. See P14
‘Important Note’. See iagrams 16 & 17
To aid the installation of the suite parts. We advise that the fires power cable should be routed neatly down the
side of the fire. See iagram 18
iagram 16 iagram 17
R1-06/2023
iagram 18 iagram 19
Power Cable Routing
The fire installation is now complete. Locate the previously unpacked surround top, base and sides.
The suite base/hearth, will be fitted to the wall mounted fire first. To aid fitment loosen the 4x M6 Hex head screws
which will be installed on the fire at the factory. These need to be backed off fully to allow the hearth top panel to
slide on to the mount brackets without resistance. See iagram 19 & 20
Indice
Altri manuali bemodern Camino da interno
bemodern
bemodern BROSELEY EVOLUTION Canterbury Remote Manuale
bemodern
bemodern Pryzm 1000 Manuale utente
bemodern
bemodern 2983 Manuale utente
bemodern
bemodern HANSFORD GRANDE Manuale di programmazione
bemodern
bemodern 2599M Manuale utente
bemodern
bemodern Pryzm Volta 42 Guida
bemodern
bemodern EARDF16NG Guida utente
bemodern
bemodern BM-121 2 Series Manuale utente
bemodern
bemodern PRIZM MEDIAVUE Manuale di programmazione
bemodern
bemodern 2603 HE900E Istruzioni per l'installazione
bemodern
bemodern ELSIE 960 Manuale utente
bemodern
bemodern 2599R Manuale utente
bemodern
bemodern Pryzm 750 Manuale utente
bemodern
bemodern 2100 Manuale utente
bemodern
bemodern 2668 Manuale utente
bemodern
bemodern Pryzm 750 Guida
bemodern
bemodern Arteon 4119 Manuale utente
bemodern
bemodern Beadnell Manuale del proprietario
bemodern
bemodern EVOLV GAS FIRES 520 Slimline Inset Guida utente
bemodern
bemodern Arteon Pryzm 10003SL Manuale utente
