Bender RFID114 Manuale utente

Manual

RFID114_D00328_00_M_XXEN/04.2018

For use in combination with charge controllers used in

electric vehicle charging stations, wall boxes or street

light charging points

RFID114

Bender GmbH & Co. KG

P.O. Box 1161 • 35301 Grünberg • Germany

Londorfer Str. 65 • 35305 Grünberg • Germany

Tel.: +49 6401 807-0 • Fax: +49 6401 807-259

E-mail: info@bender.de • www.bender.de

Reprinting only with permission of the publisher.

Subject to change!

Photos: Bender archives

Table of Contents

RFID114_D00328_00_M_XXEN/04.2018

1. Important information .................................................................................... 5

1.1 How to use this manual ................................................................................. 5

1.2 Technical support: service and support ................................................... 5

1.3 Delivery conditions .......................................................................................... 6

1.4 Inspection, transport and storage .............................................................. 6

1.5 Disposal ............................................................................................................... 6

1.6 Intended use ...................................................................................................... 6

2. RFID module ..................................................................................................... 8

2.1 Dimensions for mounting ............................................................................. 9

2.2 Operation ......................................................................................................... 10

3. Technical data ................................................................................................. 11

3.1 Tabular data .................................................................................................... 11

3.2 Standards, approvals, certifications ........................................................ 13

3.3 Ordering information .................................................................................. 13

3.4 Declaration of conformity .......................................................................... 14

Table of Contents

4RFID114_D00328_00_M_XXEN/04.2018

RFID114_D00328_00_M_XXEN/04.2018

1. Important information

1.1 How to use this manual

Always keep this manual within easy reach for future reference.

1.2 Technical support: service and support

Technical support by phone or e-mail for all Bender products

 Questions concerning specific customer applications

 Commissioning

 Troubleshooting

Telephone: +49 6401 807-760*

Fax: +49 6401 807-259

In Germany only: 0700BenderHelp (telephone and fax)

E-mail: [email protected]

*Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC +1)

1.3 Delivery conditions

Bender sale and delivery conditions apply. These can be obtained from

Bender in printed or electronic format.

This manual is intended for qualified personnel working in

electrical engineering and electronics!

This symbol denotes information intended to assist the user

in making optimum use of the product.

Important information

6RFID114_D00328_00_M_XXEN/04.2018

1.4 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the

contents of the package with the delivery documents. In the event of damage

in transit, please contact Bender immediately. The devices must only be

stored in areas where they are protected from dust, damp, and spray and drip-

ping water, and in which the specified storage temperatures can be ensured.

1.5 Disposal

Abide by the national regulations and laws governing the disposal of this de-

vice. Ask your supplier if you are not sure how to dispose of the old equip-

ment.

For more information on the disposal of Bender devices, refer to our

homepage at www.bender.de -> Service & support.

1.6 Intended use

This manual provides a description of an RFID module which may only be

used in combination with Bender charge controllers. The charge controller is

designed for use in electric vehicle (EV) charging stations, wall boxes and

street light charging points. This document should be used together with the

charge controller operating manual(s), which can be downloaded from:

www.bender.de/en/service-support/downloads

The RFID module is a separate PCB which facilitates user interaction with the

charging system and is designed in accordance with the ISO14443A/MIFARE

standard. It can be connected to the charge controller via the provided RJ45

cable.

Charging is initiated by holding a valid RFID card, which is registered in a back-

end system, close to the antenna of the RFID module. In offline operation, the

charge controller can optionally allow charging without authorization or it

can authorize users based on RFID and a local white list of authorized RFID

cards.

RFID114_D00328_00_M_XXEN/04.2018

2. RFID module

The RFID module shown below contains an antenna.

All dimensions in mm

It is a PCB that should be placed under a metal-free charging system enclo-

sure.

The RFID module must be mounted at a distance of at least

20 mm from any significant metal surface or metal parts to

ensure an optimum reading performance of the RFID

module.

CAUTION

Electrostatic discharge (ESD) may cause damage to electron-

ic components. Observe the precautions for handling elec-

trostatically sensitive components in accordance with DIN

EN 61340-5-1 and DIN EN 61340-5-2.

102.88

57.09

Note: Tolerance acc. to ISO 2768 - m

RFID module

8RFID114_D00328_00_M_XXEN/04.2018

The RFID frequency is 13.56 MHz. Bender uses the PN532 Near Field Com-

munication (NFC) controller for contactless communication, which supports

virtually all RFID/NFC communication means on this frequency. Currently only

passive tags with a UID are read. Further functionality is possible upon re-

quest.

2.1 Dimensions for mounting

All dimensions in mm

The provided RJ45 cable has a length of 50 cm.

However, the cable must not be longer than 3 m and must

comply with the CAT5 standard or higher.

2.68

2.7

46.70

2.7 7.69

97.5

7.69

Note: Tolerance acc. to ISO 2768 - m

RFID module

RFID114_D00328_00_M_XXEN/04.2018

2.2 Operation

The charging process is initiated by holding a valid RFID card close to the an-

tenna of the RFID module.

The charging process can be finished by holding the RFID card close to the

RFID module again.

Technical data

10 RFID114_D00328_00_M_XXEN/04.2018

3. Technical data

3.1 Tabular data

Insulation coordination acc. to IEC 60664-1/IEC 60664-3

Rated voltage .........................................................................................................................................................12.5 V

Overvoltage category.....................................................................................................................................................III

Pollution degree..............................................................................................................................................................3

Rated impulse withstand voltage...........................................................................................................................800 V

Rated insulation voltage........................................................................................................................................12.5 V

Altitude..................................................................................................................................................≤ 2000 m AMSL

Nominal voltage/nominal current

Nominal voltage..................................................................................................................................................DC 3.3 V

Nominal voltage tolerance .................................................................................................................................... ±5 %

Nominal current.....................................................................................................................................................80 mA

Frequency

Radio frequency ..............................................................................................................................................13.56 MHz

Environment

Operating temperature............................................................................................................................ -30…+70 °C

Climatic conditions acc. to IEC 60721:

Stationary use (IEC 60721-3-3)..............................................3K5 (except condensation, water and formation of ice)

Transport (IEC 60721-3-2)........................................................................................................................................ 2K2

Long-term storage (IEC 60721-3-1)......................................................................................................................... 1K2

Indice