bibox Firepen 3D Manuale utente
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
1
USER MANUAL
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
2
TABLE OF CONTENTS
A. SETTING UP YOUR Firepen 3D PRINTER
1. Attaching Power Supply and Powering On
B.Firepen 3D printer AT A GLANCE
1. 3D printer Diagram
2. Specifications
3. Touch Screen panel
C.FIRST USE
1. Installing Spool Holder and Mounting the Filament Spool
2. Preheating the Extruder
3. Loading Filament
4. Leveling the Build Platform
D.MAKING AN OBJECT WITH 3D printer
1. Making a Test Object from the SD Card
Appendix
Using Slicer Software Cura（一）
1. Installing Software
2. Software Settings
3. Tutorial of parameter setting
4. Software operation
Display and Controller（二）
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
3
*Its very important to see to that, the Power socket that the Firepen 3D printer connects to, can source
atleast upto 15A current and 220V AC supply. Also, see to that, this power socket isn’t sharing with other
electrical appliances. Under supply of current can cause malfunction of the Firepen 3D printer unit.
A. SETTING UP YOUR Firepen 3D PRINTER.
1.Attaching Power Supply and Powering On
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
4
B.Firepen 3D printer AT A GLANCE
1. 3D printer Diagram
Extruder
Gantry rod
Drive bearing
Y axis motor
Build plate screws
Build plate
Build platform
Threaded rod
X axis motor
Touch Screen
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
5
Feed tube
Filament Out
Detector
Spool holder
Power input
SD card slot
USB port
Power switch
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
6
2. Specifications
Machine model
Firepen 3D P220 printer
Machine Color
Black & Red
Display
Full color Touch screen
Language
English
Print Technology
Fused Filament Fabrication (FDM/FFF)
Layer resolution
0.05-0.4mm
Nozzle diameter
0.4mm
Positioning Precision
Z: 2.5 microns X Y: 11 microns
Print speed
20-180mm/s
Filament diameter
1.75mm
Filament
PLA/ABS/TPU/HIPS/PETG/Wood/Carbon Fiber/Z-Marble/Twinkling/Silky
AC Input
220V-110V
Supplied software
Repetier-Host
File types
.stl/.obj/.dae/.amf
Save fomat
g code
Connectivity
USB, SD card
Print dimensions
200*200*200mm
Weight
21kg
Desktop space
420*420*460mm
Nozzle quantity
One
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
7
3. Touch Screen panel
Progress bar
Model name
Runtime stats
Heated bed
temperature
Nozzle temperature
Tools (Allows you to
change the temperature
setting for the extruder
or heated bed, fan speed,
and pause or stop printing)
Fan speed
Current temperature/ Set temperature
Tips: Go to Appendix for Display and Controller
C.FIRST USE
1. Installing Spool Holder and Mounting the Filament Spool:- Take out the spool
holder from the accessory box, Attach the spool holder at the back side of the
machine.
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
8
2.Preheating the Extruder
Go to the Touch screen panel and select Preheat > Add.
Add the extruder to 200℃. Wait for the extruder to heat to the set temperature.
Please press Add or Dec button to heat the extruder before start printing, or the
extruder won’t be heated.
( Nozzle 1 - 200/200 shows the current temperature and the set temperature of
nozzles. Press E1 button, the display will show for the temperature of heated bed.
Press 1 ℃button to choose the increase rate 1℃/5℃/10℃of heat temperature for
each press.)
3. Loading Filament:-
After the extruder reaches 200° C, press the knob on Filament Out Device to the
left, Take and straighten the end of the filament, insert it through the device into the
extruder. The machine will alarm all the time if the knob is not pressed to the left
while inserting the filament, in such a scenario, please load filament again.
Push down on the Extruder Arm, Continue to hold it down as you insert the free
end of the filament into the hole in the top of the extruder. Push the filament in as
far as it will go. You will see plastic start to emerge from the extruder nozzle.
Release the extruder arm.
Feeding pipe
Filament out device knob
Feed port
Feed port
Extruder button /arm
4. Leveling the Build Platform
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
9
principle：rotate the below four nuts, the spring shrink or spread, and further control the
platform down or up.
method：move the extruder to anywhere on the platform, make sure the nozzle is close to the
platform, move normal and do not scratch the masking paper(the preminum distance
is 0.1-0.2mm)
○
1
click<Home>——<Home>
○
2
click<Set>——<Motor off>
Evobi Automations Pvt Ltd www.firepen3d.bibox.in
10
D.MAKING AN OBJECT WITH 3D printer
1.Making a Test Object from the SD Card
The Firepen 3D printer package includes an SD card pre-loaded with a file for
making a test object.
The SD Card is located in the accessory box. Insert the SD card into the SD
card slot. Go to the Touch screen panel and select Print and choose
“whistle.g” to start printing.
Tips: Stl is a widely used file format for 3D models. (Others: obj，amf，dae)
Thingiverse is a website where 3D printer users can share design files and
download it for free.
For printing it is very important that the first layer is nicely squished into the build
plate and sticks well to it.
1. If the distance between the nozzle and build plate is too big, your print won’t
stick properly to the glass plate.
Please loose the knobs [turn them to the left] moves the build plate closer to the
extruder nozzle
2. If the nozzle is too close to the build plate it can prevent the filament
from extruding from the nozzle. This can also scratch the build plate.
Please tighten the knobs [turn them to the right] moves the build plate away from
the extruder nozzle.
3. The 3rd image below, shows the Perfect first layer, with correct setting of the
extruder nozzle distance from the build plate.
Indice
