Billion MWEB W40 Manuale utente

Quick Start Guide

MW/W40 V4.0A-090115 Page 2

Package Contents..................................................................................................................................................................... 3

The Front LEDs.......................................................................................................................................................................... 4

The Rear Ports........................................................................................................................................................................... 5

Getting Started:........................................................................................................................................................................ 6

Setting up your MWEB W40: ............................................................................................................................................... 7

Using the Management Utility:.......................................................................................................................................... 14

Use & Management of the Wireless Connection:....................................................................................................................15

Manage ISP account settings:........................................................................................................................................... 17

Manage Administrative settings: ..................................................................................................................................................17

Running a Diagnostics Test: .............................................................................................................................................. 18

Troubleshooting: .................................................................................................................................................................... 19

Product Support and Contact Information.................................................................................................................... 20

MWEB ADSL Wi-Fi Router

MW/W40 V4.0A-090115 Page 3

The serial Ethernet adapter cannot be used as a substitute for a

network card. This adapter should only be installed if requested to

do so by an MWEB Technical Support Agent.

Package Contents

Do not use this router in high humidity or high temperatures.

Do not use the same power source for the MWEB W40 as other

equipment.

Do not open the casing or try to repair the MWEB W40 yourself.

Avoid using this product and all accessories outdoors.

Warning

Place the MWEB W40 on a stable surface.

Only use the power adapter that comes with the package. Using a

different voltage rating power adaptor may damage this router.

For advanced users: The default IP for the MWEB W40 is:

192.168.1.254

For advanced users: The default administrative username and

password are: admin and admin.

Attention

Quick Start Guide

MW/W40 V4.0A-090115 Page 4

The Front LEDs

LED Meaning

1 Internet Lit steady when there is a PPPoE connection.

2 DSL Lit when successfully connected to an ADSL DSLAM

(“linesync”).

3 Mail Lit and flashing periodically when there is mail in your

inbox.

4 WLAN Lit green when the wireless connection is established.

Flashes when sending/receiving data.

5LAN Port

1 - 4

(RJ-45 connector)

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

6 PWR Lit when power is ON.

MWEB ADSL Wi-Fi Router

MW/W40 V4.0A-090115 Page 5

The Ethernet Port # 4 can be used as a console port. You need the special

console adapter, included in this package, to connect the LAN cable of Port 4

when connecting to a PC’s RS-232 port (9-pin serial port). Note that the console

port is for emergency use only, and should not be used by default.

The Rear Ports

Port Meaning

Power Switch Power ON/OFF switch

Power Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

1-3 seconds: reset the device

6 – 8 seconds: restore to factory default settings (this is useful

when you have forgotten the router’s administrative password).

Note: If the reset button is pressed for more than 10 seconds

the device will need to be power cycled before normal

operation can be resumed.

WPS Push WPS button to trigger Wi-Fi Protected Setup function.

LAN (YELLOW)

1 — 4

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat

5 or Cat

5e) to

one of the

LAN ports when connecting to a PC or an office/home network

of 10Mbps, 100Mbps.

DSL (RED)

Connect the red RJ

11 cable to this port when connecting to

the phone-line jack on the wall via the red “DSL” port on the

splitter.

Antenna Connect the detachable antenna to this port.

Quick Start Guide

MW/W40 V4.0A-090115 Page 6

This Quick Start Guide only applies to users running Microsoft

Vista, Windows XP and Windows 2000 operating systems.

If you are running Windows 98 or Windows NT, please refer to

chapter 3 of the user manual for the installation process. To view

the manual, insert the CD and click on “Read User’s Manual” when

the MWEB W40 Control Panel is displayed.

Linux and MAC OS users please refer to page 30 of the user

manual for details on Wireless Security. MWEB strongly

recommends that their users change the Wireless Network ID and

the Wireless Security Key.

The software for the W40 makes provision for the use of WPA as

the security key. If you would like to make use of WPA2 or WEP

for the security key, please refer to page 32 of the user manual.

If you are running an operating system from a different vendor

such as Linux or MAC OS, please refer to the online user manual

for assistance in installing the W40.

Before you continue, please make sure you are logged onto your

PC or laptop using a Windows user account with administrative

rights, the Easy Setup Wizard might require making changes on

your system setup.

Advanced users may access the router’s graphical user interface

on the following IP address: 192.168.1.254

The default administration username is “admin” and the password

is “admin”.

Important Note: It is a security risk to leave your administration

password as default – we strongly urge you to change it. Please

refer to the installation process or the user manual on your

installation CD for assistance.

Getting Started:

An Easy Setup Wizard has been developed to simplify the setup and maintenance of your MWEB W40.

The enclosed CD includes:

MWEB W40 Easy Setup Wizard (a Step-by-Step Wizard for initial setup)

MWEB W40 Utility (to assist you with post-installation maintenance and diagnostics)

MWEB W40 User’s Manual

MWEB W40 Diagnostics

Attention

MWEB ADSL Wi-Fi Router

MW/W40 V4.0A-090115 Page 7

This section will guide you in setting up your MWEB W40 to connect

to the Internet, using your ADSL ISP account.

The hardware & cables installation form part of the setup procedure

below. Please do not perform any hardware setup now.

If nothing happens when you insert the CD, refer to the

troubleshooting section at the end of this guide.

Please refer to the section below “Setting up your MWEB W40” to complete a basic initial installation.

Setting up your MWEB W40:

1. Insert the enclosed MWEB W40 CD into your CD drive. The MWEB W40 software,

including an Easy Setup Wizard (Step-by-Step), management utility and user manual will now

automatically be installed to your hard drive. Please follow the on-screen instruction - see figure

below.

2. Once the software installation is complete, the easy setup wizard will run automatically.

Follow the step-by-step instructions to complete a basic installation. See figure below.

Quick Start Guide

MW/W40 V4.0A-090115 Page 8

While a video is being displayed, you may click the “Pause” button to

temporarily pause the video. Clicking the same button again will

resume the video. Clicking the “Stop” button will return you to the

hardware installation menu screen.

3. You may use the “Next” and “Previous” buttons to navigate the installation steps. Click the

“Next” button on the welcome screen now.

4. The package content screen will now be displayed (See figure below). Move your mouse

cursor over each item label in the list to view a picture of the specific item, or click the “Play Video”

icon in the bottom-right corner of the screen to view an animated video of the package content.

Please ensure that your package is complete and then click “Next” to proceed to the next step.

5. The hardware installation step will now be displayed (See figure below). This screen will

display animated videos that will assist you in connecting your MWEB W40 hardware and enclosed

cables.

There are four sub-steps (videos) to view on this form. Please click on each “Play Video” icon and

follow the displayed instruction closely. Then click “Next”.

MWEB ADSL Wi-Fi Router

MW/W40 V4.0A-090115 Page 9

6. An installation diagram overview will now be displayed (see figure below). Please ensure

that you have correctly connected all the related hardware and cables. Please click “Next”.

7. The Network Connection Setup step will be displayed next (see figure below). Note that in

order for this wizard to set up your router successfully, your computer needs to be able to

communicate with the MWEB W40 router. This is achieved by setting your computer to

automatically obtain an IP address from the MWEB W40. Note that all static and custom network

settings will be overwritten for the selected network card.

This screen will allow you to choose the network card and to set it up to receive an IP address from

the MWEB W40. A list of the available network cards is displayed in the dropdown box at the top of

the form, while the detail of the currently selected card is displayed in the centre part of the form.

Please select the network card you want the wizard to alter from the dropdown box. Note that

wireless and other non-cable connections are not valid options and will thus not be displayed in the

list.

Once you have made your selection and confirmed that it is indeed the network card you want to

use, click on the “Setup Network Card” button in the bottom-right corner to setup your network

connection. On successful completion of this process, the Diagnostics test screen will appear.

Quick Start Guide

MW/W40 V4.0A-090115 Page 10

If your network connection was already setup to obtain its IP

address automatically, you computer might have already

established communications with the MWEB W40 router and the

wizard might have skipped directly to the Diagnostics step.

For advanced users: If you do not wish to use the automatic

network card setup step and you want to use a static IP scheme,

please make sure that your network connection is setup in the

correct IP range. Note that the MWEB W40 has a default IP

address of 192.168.1.254, so your computer needs to be setup in

the following range 192.168.1.x. Also setup your default gateway

and DNS server to point to the IP address of the W40.

8. On the Diagnostics test screen (see figure below), four tests will be performed to determine

the current status of your MWEB W40 router. These tests include:

Testing the network connection to your MWEB W40

Testing ADSL Synchronization

Testing a PPP connection

Testing a limited Internet connection using the MWEB guest account

Click on the “Diagnose” button to start the test. Should any of the four tests fail, you will be notified

of the specific failure and assisted in correcting the fault. Please follow the instructions carefully in

order to rectify any possible problems. On passing all four tests, the wizard will proceed to the next

step: Telkom Line Verification.

9. If your line is verified, the easy setup wizard will continue to the next step. If not, the Telkom

Line Verification step will help you verify your ADSL service on the live Telkom ADSL verification

webpage. Please follow the instructions on the webpage as opened in the frame on the right hand

side of the form. See figure below – the red block indicates the Telkom webpage frame. On

Indice

Altri manuali Billion Router di rete

Billion

Billion BIPAC 7100G Manuale utente

Billion

Billion BiPAC 7401VGP Manuale utente

Billion

Billion BiPAC 7300M Manuale utente

Billion

Billion BiPAC 7402VL Manuale utente

Billion

Billion BIPAC-741 GE V2.0 Manuale utente

Billion

Billion BIPAC-645 Manuale utente

Billion

Billion ADSL Modem / Router BIPAC-711C2 Manuale utente

Billion

Billion BiPAC 711C2 Manuale utente

Billion

Billion BiPAC 7800GZ(L) Manuale utente

Billion

Billion BiPAC 9800 Manuale utente

Billion

Billion BiPAC 7300G Manuale utente

Billion

Billion Modem/Router ADSL BIPAC-7100 Guida

Billion

Billion Modem/Router ADSL BIPAC-7100S Manuale utente

Billion

Billion BiPAC 7404VGO Manuale utente

Billion

Billion BiPAC 6200WZL R2 Manuale utente

Billion

Billion BiPAC 7404VNOX Manuale utente

Billion

Billion BiPAC 7402R2 Manuale utente

Billion

Billion BIPAC 7402W Manuale utente

Billion

Billion BiPAC 8501 Manuale utente

Billion

Billion BiPAC 5100 Manuale utente

Billion

Billion BiPAC 6300NXL Manuale utente

Billion

Billion BiPAC 7402VGO Manuale utente

Billion

Billion BiPAC 7800(N)X(L) Manuale utente

Billion

Billion BiPAC 5200W Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

LevelOne

LevelOne FBR-1416 Manuale utente