BITREK BI 868 TREK Manuale utente
DYSCOVI SYSTEMS RPE LIMITED
Company code 16303375, account №260075014037759
in «UKREXIMBANK» in Kyiv
MFI 380333, tax number 163033726585
95-S Vidradniy avenue, Kyiv, Ukraine, 03061. Phone +38044 507 02 07. Fax +38044 507 02 02. www.bitrek.eu, s[email protected]u
USER MANUAL
GPS TRACKER
BI 868 TREK
Version 2015.11.1.
Kyiv, 2015
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
Contents
1.Introduction .................................................................................................3
2.Purpose .......................................................................................................4
3.Appearance ..................................................................................................5
4.Package contents ..........................................................................................6
5.Technical characteristics ................................................................................7
6.Pin assignment .............................................................................................8
7.Device configuration...................................................................................... 9
8.LED description........................................................................................... 14
9.Tracker installation...................................................................................... 15
10.Important points during equipment configuration .......................................... 16
11.Conclusion................................................................................................ 17
Appendix 1. .................................................................................................. 18
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
1.Introduction
Dear Partners!
Congratulations on your choice of products manufactured under the trademark
BITREKTM. Our team does everything possible to make you satisfied with your
choice, and make every effort for your comfortable work with our equipment.
We present to your attention the user manual of the BI 868 TREK device
(“tracker” on further). Here you will find information about the whole operation
process of the tracker –its technical characteristics, first configuration and after-
sales service, important points during equipment configuration. We hope that you
will be satisfied with the quality, reliability and stability of not only the tracker BI
868 TREK, but also you will become our regular partner with other models of
equipment BITREKTM.
Actual equipment information and documentation is always available on our
official websites –www.bitrek.eu and www.bitrek.com.ua.
Enjoy!
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
2.Purpose
The tracker is used for online vehicle tracking and control using different satellite
tracking systems and transmission the data via mobile communication with the
support of additional sensors connection.
BI 868 TREK is using on moving and stationary objects which have the power
supply.
BI 868 TREK is using for:
Geographical coordinates, speed and direction of movement definition;
Remote control of executive devices;
Voice connection;
Data transfer to server for the further processing by specialized software.
BI 868 TREK is recommended for monitoring:
Cars and minibuses
Trucks
Construction machinery
Agricultural machinery
Passenger transport
Railway transport
BI 868 TREK is not recommended for monitoring water transport
and the objects of observation with the placement in the
environment without special additional sealed boxes.
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
3. Appearance
Appearance of BI 868 TREK and antennas connectors is shown in figure 3.1:
Picture 3.1. BI 868 TREK appearance
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
4.Package contents
BI 868 TREK has the following package contents:
GPS tracker for moving objects BI 868 TREK –1 pc.
Technical passport–1 pc.
Guarantee card –1 pc.
Packing box –1 pc.
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
5.Technical characteristics
Parameter
Characteristics
Data transfer
GSM 900/1800
Communication methods
GPRS, SMS for settings
GPRS class
10
GPS and GSM antennas
Internal
Navigation system type
GPS/GLONASS/GALILEO/BEIDOU
Accelerometer
+
Protected power circuit
+
SIM-cards
1
Digital inputs
1
Digital outputs
1
Analog inputs
2
Digital inputs voltage range
from 0V to 40V
Supply voltage
12/24V
Typical current consumption (12V)
60mA
Maximum current consumption (12V)
350mA
Internal nonvolatile memory
2MB (65 000 records)
Built-in battery
1 000mA
Operating battery
от -30 °С до +80 °С
Dimensions (W х L х H)
90 х 58 х 21 mm
Weight
110 g.
Ingress Protection
IP54
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
6.Pin assignment
+Vcc
GND
Out1
Ignition Blue
Black
Red
Purple
An_in1 White
An_in2 Brown
Picture 6.1. BI 868 TREK pin assignment
Color
Contact name
Type of signal
Contact purpose
Red
+ Vсс
Power supply
«+» On-board power supply (nominal
voltage 12 V or 24 V)
Black
GND
Power supply
Common wire (ground)
White
An_in 1
Input
Analog input
Brown
An_in 2
Input
Analog input
Blue
Ignition
Input
Active digital input «1» Reserved for
ignition signal.
Purple
Out 1
Output
Digital output
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
7. Device configuration
To configure the device you need to have BITREK CONFIGURATOR software,
which is available for free download from official BITREKTM websites www.bitrek.eu
or www.bitrek.com.ua.
System requirements:
Windows XP and newer;
Framework 4 and newer*;
From 1024 MB of random access memory;
From 50 MB of free disk space (including logs).
* How to check your current version of Framework:
https://support.microsoft.com/en-us/kb/318785/en-us.
How to update Framework:
https://www.microsoft.com/en-US/download/details.aspx?id=30653
How to update Framework on Windows XP:
https://www.microsoft.com/en-US/download/details.aspx?id=17851
7.1. Tracker to PC connection
To connect tracker to PC you need to have:
12-24 V power source.
BITREK programmer (USB-UART)
1
2
3
4
5
6
1
2
3
4
5
6
Picture 7.1. USB-
UART –top view
Picture 7.2. USB-
UART –bottom view
USB-A –USB-B cable to connect programmer
Picture 7.3. USB-A –USB-B cable
Special cable for tracker configuration
BI 810 TREK
BI 820 TREK
BI 820 TREK (OBD)
BI 310 CICADA
BI 868 TREK
Picture 7.4. Cable for tracker configuration
www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
To establish the connection you need:
7.1.1. Remove the tracker’s 2 screws on the bottom cover, and then remove the top
cover.
7.1.2. Connect cable for configuration to XP2 jack on the top chip. Red cable must
be connected to pins 1 both on tracker and programmer (picture 7.5).
7.1.3. Connect USB-A –USB-B cable with the narrow connector to programmer, and
with wide connector to any free USB-port of your PC.
7.1.4. Apply 12-24V power on tracker’s appropriate contacts (picture 6.1.).
BI 810 TREK
BI 820 TREK
BI 820 TREK (OBD)
BI 310 CICADA
XP7XP8
1
2
3
4
5
6
BI 868 TREK
3
2
1
Picture 7.5. Tracker to programmer connection
After tracker connection to PC is successful, your operating system will automatically
install driver for programmer. If the automatic driver installation has not occurred,
download it from the link http://www.ftdichip.com/Drivers/VCP.htm or from
BITREKTM corporate websites www.bitrek.eu or www.bitrek.com.ua.
7.2. Remote tracker configuration
For remote configuration, you need to have a power source 12-24V and a GSM
modem with an activated SIM-card with available SMS service inserted in.
GSM-modems supported models *:
BITREK GSM-modem
Cinterion MC35i
*GSM-modems, which were tested with BITREK CONFIGURATOR.BITREK CONFIGURATOR can
work with any GSM-modem, connected to the COM-port of PC.
Activated SIM-card with available SMS and GPRS services must be
inserted in tracker. On SIM-card PIN-code verification needs to be
removed and the phone book needs to be empty. If you are going to
use voice communication, voice services also needs to be activated on
the SIM-card.
Indice
Altri manuali BITREK GPS
BITREK
BITREK BI-530C TREK Manuale utente
BITREK
BITREK BI-520L TREK Manuale utente
BITREK
BITREK BI-868 TREK HW2 Manuale utente
BITREK
BITREK BI 530R TREK Manuale utente
BITREK
BITREK BI 820 TREK OBD Manuale utente
BITREK
BITREK BI-820OBD TREK Manuale utente
BITREK
BITREK BI-810 TREK Manuale utente
BITREK
BITREK BI-530P TREK Manuale utente
BITREK
BITREK BI 810 TREK Manuale utente
BITREK
BITREK BI-910 TREK Manuale utente
