BITREK BI-910 TREK Manuale utente

Research and Production Enterprise "DISC SYSTEMS" LTD

EDRPOU 16303375, a/c No.260075014037759

at PJSC "UKREXIMBANK" in c. Kyiv

MFO 380333, TIN 163033726585

www.bitrek.com.ua

+380 44 507 02 07

03061, Ukraine, c. Kyiv, 95-S Otradny ave., Telephone +38044 507 02 07. Fax +38044 507 02 02. www.bitrek.com.ua, sa[email protected]m.ua

Vehicles tracking device

BI-910 TREK

Operating Manual

Version 2019.09.1

2 
www.bitrek.com.ua 
[email protected]om.ua 
+380 44 507 02 07 
 
Table of Contents 
Introduction...................................................................................................... 3 
Safety Requirements for Installation and Maintenance of Tracking Device "BI-
910 TREK" .................................................................................................... 3 
Transportation and Storage............................................................................. 3 
Warranty ...................................................................................................... 3 
Device ............................................................................................................. 3 
Intended Use of the Device ............................................................................. 3 
Principle of Operation ..................................................................................... 4 
Specifications ................................................................................................ 4 
Tracking device design ................................................................................... 5 
Scope of Delivery........................................................................................... 6 
Preparation for Operation ................................................................................... 6 
Inserting SIM–Card ........................................................................................ 6 
Sockets for Power Supply, Antennas, and Periphery Devices ............................... 7 
Connection of the Power Supply, Discrete and Analog Sensors, as well as Extra 
Devices ........................................................................................................ 8 
Installation and Commissioning ......................................................................... 10 
Installation Guide......................................................................................... 10 
Electrical Connections................................................................................... 10 
Connection to a Computer............................................................................. 11 
Indicators Description................................................................................... 11 
List of SMS Commands..................................................................................... 12 
Structure of the SMS Commands ................................................................... 12 
Configuring the Device ................................................................................. 13 
Detailed Description of Information Commands ............................................... 15 
Detailed Description of Controlling Commands................................................. 16 
Basic Device Configuration ............................................................................ 18 
Security Settings ............................................................................................. 18 
Configuring I/O Components............................................................................. 19 
Configuring Alarms .......................................................................................... 23 
Switching Between the Profiles.......................................................................... 24 
Description of Profile Switching...................................................................... 24 
Description of Operator Selection Modes ......................................................... 24 
Configuring Roaming Settings ........................................................................... 27 
List of prohibited operators ............................................................................... 29 
Configuring the Device for Operation with RFID Readers....................................... 29 
Configuring the Device for Operation with Thermometers DS18B20 ....................... 29 
Configuring the Device for Operation with Fuel Meter RS-485................................ 31 
Use of Backup Server....................................................................................... 32 
Configuring Engine Lock ................................................................................... 32 
Addendum 1. Device parameters....................................................................... 34 
Addendum 2. List of I/O components ................................................................. 47 

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

Introduction

Safety Requirements for Installation and Maintenance of

Tracking Device "BI-910 TREK"

Compliance with the safety precautions is the responsibility of

technical personnel installing the tracking device, as well as employees in

charge of equipment on site.

To avoid damage to the device, please, keep it in a stress-resistant

case. Before using the device, please, place it so that its status LED

indicators are clearly visible. Prior to dismantling outputs of the device,

please, disconnect its power supply unit.

Transportation and Storage

The tracking device in the manufacturer's package can be

transported by any closed land and sea transport mode (in railroad cars,

containers, closed trucks, cabins, etc.). It can also be transported in

heated aircraft cabins.

When transporting and storing the device, the package instructions

on the labels must be observed.

Warranty

The warranty period for the tracking device shall be 12 months of

the date of commissioning. The commissioning date must be recorded

per requirements set forth in the certificate for the tracking device; if no

such data are available in the certificate, the warranty period shall be

counted starting with the tracking device shipment to the customer.

Manufacturer's warranty shall only be valid provided that the

customer complies with the requirements of this Manual. In the event of

their violation, or in the presence of mechanical or electrical damage

caused by the factors that are not covered in this Manual, the Warranty

shall be deemed void.

Device

Intended Use of the Device

Tracking device BI-910 TREK is used for navigation tasks, remote

control and monitoring of a vehicle or other remote object.

The tracking device is intended for installation to any mobile or

remote stationary object in order to:

determine geographical coordinates, speed and direction of

movement;

collect data coming from the external devices;

control actuators;

voice communication;

transfer the data to a dispatch center.

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

GSM 900/1800 or GSM 850/900/1800/1900 mobile carrier network

is used as a medium for data transfer. To determine the coordinates,

NAVSTAR GPS system is used. To detect vehicle movement, the data

obtained from GPS or GPS/GLONASS and internal acceleration meter are

used.

The device must be installed in a spot unavailable to a driver.

Principle of Operation

In real time, the tracking device:

using an in-built GPS or GPS/GLONASS receiver, determines the

location and motion parameters of an object (time, geographical

coordinates, speed, direction of travel);

collects and processes information coming from analog and

discrete sensors;

controls actuators upon the command from the operator panel.

The data obtained are recorded and stored in the internal log that

is based on a non-volatile memory chip. Records from this log are

transferred to the operator panel through a GSM channel with a

predetermined frequency or on an event basis. Information exchange is

done via GPRS and SMS. Voice communication is also supported.

On-line terminal operation is only possible provided there is GSM

coverage. Beyond the GSM network coverage area, the tracking device is

in the mode of a "black box", i.e. it records all logged information to the

non-volatile memory and transfers it when a vehicles enters into a GSM

coverage area.

Specifications

Table 1. Device Specifications

No.

Item

Specifications

Data transfer standard

GSM 900/1800 or GSM

850/900/1800/1900

GSM network communication channel

GPRS, SMS, voice

communication

GPRS grade

GPS and GSM antennae

External

Navigation system types

GPS or GPS/GLONASS

Auxiliary digital protocol

RS-485, 1Wire, CAN

(FMS)

Motion sensor

Acceleration meter

Secure power supply input

yes

Number of SIM cards

Number of 0-active discrete inputs

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

No.

Item

Specifications

Number of 1-active discrete inputs

Number of discrete outputs

Discrete inputs voltage range

from 0 V to 40 V

Type of discrete outputs

open collector

Full-load amperage of discrete outputs

0.5 А

Number of analog inputs

Analog input voltage range

from 0 V to 27 V

Power

Voltage

from 6 v to 40 V

Normal current (12 V)

60 mA

Max. current (12 V)

300 mA

Microphone

Electrete

Microphone load resistance

2.2 kOhm

Outer speaker resistance

≥ 8 Ohm

Non-volatile memory capacity

2 MB (or 65,000 entries)

Internal battery Li-Ion

1,000 mAh

Operating temperature

from -30 °С to +80 °С

80 ± 15 %

Dimensions (W х L х H)

125 х 95 х 33

Weight

200 g

Body

IP 65 (plastic РА 6)

Connection (cable)

IP 68

Tracking device design

Fig. 1. Appearance and Dimensions of Tracking Device BI-910 TREK.

(General view)

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

Fig. 2. Appearance and Dimensions of Tracking Device BI-910 TREK.

(Rear view)

Scope of Delivery

1. Tracking Device BI-910 TREK - 1 pc.

2. GPS antenna –1 pc.

3. GSM antenna –1 pc.

4. Connection cable - 1 pc.

5. Certificate –1 pc.

6. Warranty sheet –1 pc.

7. Packing box –1 pc.

Preparation for Operation

Inserting SIM–Card

To operate on a GSM network, at least one SIM-card has to be

inserted into the device. The second SIM-card is optional and can be used

for an alternative carrier network in areas with no primary carrier's

coverage. Contacts of the SIM-card must not be saved, PIN-code must be

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

disabled (a SIM-card with an enabled PIN-code can be used provided that

the PIN-code has been entered into the device settings).

To insert a SIM-card all device connectors must be disconnected

and its top cover must be removed. There are 2 slots on the top of the

circuit board. The SIM-card selected by default shall be inserted to slot 1

(SIM1). Then the device has to be reassembled in the reversed order.

ATTENTION! The manufacturer does not supply a SIM-

card necessary for connecting to a GSM network! You can

purchase a SIM-card from a local GSM carrier!

Sockets for Power Supply, Antennas, and Periphery

Devices

The front panel of the tracking device contains antennae

connectors, while its rear panel contains power supply connector,

discrete and analog sensors, actuators and headset connectors. For

antennae connection, SMA inlets are used. The locations of the inlets is

shown in Figure 3.

Fig. 3. Appearance and Antennae Connectors Legends on Tracking Device

BI-910 TREK

To connect to the power supply socket, sensors and actuators, IP

68 connector socket is used. Location of power supply socket is shown in

Figure 4.

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

Fig. 4. Location of the Socket and Numbers of Pins

Connection of the Power Supply, Discrete and Analog

Sensors, as well as Extra Devices

Fig. 5. BI-910 TREK Contact Pins

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

Table 2. Pin legends

No.

Color

Pin legend

Signal

Pin purpose

А1

Yellow/Red

CAN_H

Input/Output

CAN_H signal from the

CAN bus

А2

Violette /

Black

Wire_PWR

Power

Output +3.3 V for device

power supply "1-Wire"

(15 mA max)

А3

Green/

Yellow

1-Wire

Input/Output

1-Wire interface data

signal

А4

White/Red

DOut 1

Output

Discrete output No.1

А5

Violette

DAT_low 4

Input

0-active discrete input

А6

Brown

DAT_low 1

Input

0-active discrete input

А7

Red/Black

Ignition

Input

1-active discrete input -

spared for ignition

А8

Red

+ Vin

Power

"+" on-board power

terminal (nominal voltage

is 12 VDC or 24 VDC)

Yellow/

Black

CAN_L

Input/Output

CAN_L signal from the

CAN bus

Black/White

M +

Input

Mic "+" input

Black/Red

M -

Input

Mic "-" input

В4

White/Black

DOut 2

Output

Discrete output No.2

White

An_in 1

Input

Analog input No.1

Oragnge

DAT_low 2

Input

0-active discrete input

Green/Red

Input/Output

"А" signal RS-485

Yellow

+ Vout

Power

Secure power input for

extra sensors.

Voltage is + Vin.

Max. current is 300 mA.

Black

GND

Power

Ground (earth)

Blue/Red

H +

Output

Speaker output "+"

Blue/Black

H -

Output

Speaker output "-"

Blue

DAT_high 1

Input

1-active discrete input

Gray

An_in 2

Input

Analog input No.2

Green

DAT_low 3

Input

0-active discrete input

Green/Black

Input/Output

"B" signal RS-485

Black

GND

Power

Ground (earth)

www.bitrek.com.ua

[email protected]om.ua

+380 44 507 02 07

Installation and Commissioning

Installation Guide

Tracking device location must ensure connections of sockets and

avoid potential of accidental damage; it also must eliminate exposure to

direct sunlight, moisture, etc. Recommended location of installation in a

vehicle is the empty space under the dashboard inside a vehicle.

GPS and GSM antennae shall also be located in the empty space

under the dashboard of a vehicle.

Antennae cables must be located and clamped along the entire

length with straps clamped to the clamping sites. Cabling must be done

so as to avoid any damage during the operation, when closing

doors/hatches.

Electrical Connections

Power cable shall be passed through special ports in a vehicle body

from the normal battery location to the location where the tracking

device is to be installed. Power cables shall be connected to respective

battery terminals.

ATTENTION! When performing welding operations during

repairs of a vehicle, MAKE SURE to disconnect power cable

and periphery cables!

Discrete inputs with active "0" respond to connection of these

inputs to GND (ground). This input is inactive when it is not connected

(input is 'blank').

Discrete inputs with active "1" respond to the voltage of over 8 V

on them (connection of the input to the "+" terminal of vehicle network).

This input is inactive when it is not connected (input is 'blank').

Voltage on the analog input may vary from 0 to 24 VDC.

Discrete outputs are "open collector" type. Load must be connected

into the open between the discrete output and power supply "+"

terminal. When the output is activated it closes to the GND. Max. load

current of the discrete output should not exceed 0.5 А! If high-amperage

currents need to be switched, the discrete outputs must be connected

using additional relay.

ATTENTION! Voltage on the discrete inputs and outputs

should not exceed 30 V.

Voltage on the analog inputs should not exceed 30 V.

Device input voltage should not exceed 36 V.

Otherwise, the device can be damaged.

Indice

Altri manuali BITREK GPS

BITREK

BITREK BI-868 TREK HW2 Manuale utente

BITREK

BITREK BI-820OBD TREK Manuale utente

BITREK

BITREK BI-530P TREK Manuale utente

BITREK

BITREK BI 820 TREK OBD Manuale utente

BITREK

BITREK BI-810 TREK Manuale utente

BITREK

BITREK BI 810 TREK Manuale utente

BITREK

BITREK BI-530C TREK Manuale utente

BITREK

BITREK BI-520L TREK Manuale utente

BITREK

BITREK BI 868 TREK Manuale utente

BITREK

BITREK BI 530R TREK Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente