BIXOLON SRP-350IIOBEi Manuale di istruzioni

Bluetooth Connection Manual

SRP-350IIOBEi

Thermal Printer

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

SRP-350IIOBEi

■ Table of Contents

1. Manual Information........................................................................................................3

2. Precautions ....................................................................................................................3

3. iOS MFi Mode Setting (Optional)..................................................................................3

4. Bluetooth Connection Instructions..............................................................................4

Rev. 1.00

- 3 -

SRP-350IIOBEi

1. Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-

enabled iOS devices with the printer.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 To connect the printer with another device via Bluetooth, the devices must be within

100m of one another. The connection is broken if the distance between devices

exceeds 100m.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present.

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same

frequency is present, transmission may be interrupted. Separate the printer and

Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

3. iOS MFi Mode Setting (Optional)

This product supports MFi mode that enables Bluetooth communication with iOS devices.

When MFi mode is activated, the printer is not possible to communicate with another

device except for iOS device. (Applicable to MFi Mode support models only: SRP-

350IIOBEi)

3-1 Set-up by printer

1. Turn off the printer power.

2. Remove the screw on the bottom of the printer and

open the bracket.

3. Flip the DIP switches using tweezers or another

narrow-ended tool.

4. MFi mode is available to be changed by setting the

DIP switch NO.8

5. When the DIP switch is on, MFi mode is enabled.

When the DIP switch is off, MFi mode is disabled.

6. The new setting takes effect when you turn on the

printer.

Note: Always change DIP switch settings only when

the printer is turned off. Change made with the

power on have no effect and then on again.

Rev. 1.00

- 4 -

SRP-350IIOBEi

3-2 iOS mode check

1) Implement self-test

2) iOS mode is enabled if “OPERATING MODE” printed “iOS” at the paper.

BLUETOOTH SETTING

BLUETOOTH F/W VERSION: 1.0.00

DEVICE NAME: SRP-350IIOBE

OPERATING MODE: iOS

AUTH. & ENCRY: ENABLE

CONNECTION MODE: 2

3) iOS mode is disabled if “OPERATING MODE” printed “NORMAL” at the paper.

BLUETOOTH SETTING

BLUETOOTH F/W VERSION: 1.0.00

DEVICE NAME: SRP-350IIOBE

OPERATING MODE: NORMAL

AUTH. & ENCRY: ENABLE

CONNECTION MODE: 2

4. Bluetooth Connection Instructions

This manual focuses on the use of the following devices.

Please use this manual as a guide when using devices other than those listed here.

1) Select the icon. 2) Select “General”.

Rev. 1.00

- 5 -

SRP-350IIOBEi

3) Select “Bluetooth”. 4) Select the printer to connect.

5) Enter PIN (default: 0000). 6) Select “Pair”

7) Bluetooth communication is available.

Altri manuali per SRP-350IIOBEi

Indice

Altri manuali BIXOLON Stampante

BIXOLON

BIXOLON XM7-20 Manuale utente

BIXOLON

BIXOLON SPP-R310 Manuale utente

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Manuale utente

BIXOLON

BIXOLON XM7-30 Manuale di istruzioni

BIXOLON

BIXOLON SRP-382II Manuale di installazione e funzionamento

BIXOLON

BIXOLON SRP-330 Manuale di installazione e funzionamento

BIXOLON

BIXOLON STP-103 Manuale di installazione e funzionamento

BIXOLON

BIXOLON STP-103II Manuale utente

BIXOLON

BIXOLON STP-131 Manuale utente

BIXOLON

BIXOLON SPP-C200 Manuale utente

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Nota di rilascio

BIXOLON

BIXOLON SRP-S3000 Manuale di installazione e funzionamento

BIXOLON

BIXOLON SRP-330II Manuale utente

BIXOLON

BIXOLON SRP-B300 Manuale di istruzioni

BIXOLON

BIXOLON SRP-350 PlusA Manuale di installazione e funzionamento

BIXOLON

BIXOLON STP-103III Manuale utente

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Istruzioni per l'installazione

BIXOLON

BIXOLON SRP-350plus Manuale di installazione e funzionamento

BIXOLON

BIXOLON Srp-275III Manuale utente

BIXOLON

BIXOLON BGT-102P Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

BIXOLON

BIXOLON SRP-350III Manuale utente

BIXOLON

BIXOLON SRP-QE300/302 Istruzioni per l'installazione

BIXOLON

BIXOLON SRP-350PG - SRP 350 B/W Direct Thermal... Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente