Black Box LEH1008A Manuale utente

BLACK BOX®

Hardened Managed Ethernet Switches Quick Start Guide

LEH1008A LEH1008A-2GSFP

LEH1008A-2MMSC LEH1008A-2SFP

LEH1008A-2MMST

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

Available models

Part Number Product Name Description

LEH1000 Series

LEH1008A 8-Port 10/100 Mbps PoE Hardened Managed

Ethernet Switch

8 ports, 10/100 PoE (802.af), DC power

LEH1008A-2GSFP 8-Port 10/100 Mbps PoE 2-Port GE SFP Hardened

Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports GE SFP,

DC power

LEH1008A-2MMSC 8-Port 10/100 Mbps PoE 2-Port 100-Mbps MMSC

Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX, SC,

DC power

LEH1008A-2MMST 8-Port 10/100 Mbps PoE 2-Port 100-Mbps MMST

Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX, ST,

DC power

LEH1008A-2SFP 8-Port 10/100 Mbps PoE 2-Port SFP 100-Mbps

Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX SFP,

DC power

This quick start guide describes how to install and use the hardened Managed Ethernet Switch. Designed for rugged

environments, Hardened Managed Ethernet Switches provide reliable switching in industrial areas constrained by space.

Functional Description

• Supports IEEE 802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

• Includes redundant power inputs: 47 to 57 VDC terminal block and 47–57 VDC jack.

• Power consumption: Device 15 W max. (without PoE); PoE power budget: 123.2 W max., PoE power output:

Ports 1–8: IEEE 802.3af: Up to 15.4 W/port, 47–57 VDC.

• Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment.

• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environments.

• Supports IEEE 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 1000-Mbps full duplex; 10/100-Mbps full-/half-duplex;

Auto MDI/MDIX.

• Supports Command Line Interface in RS-232 console.

• 100BASE-FX: Multimode SC or ST type; single-mode SC or ST type. 100BASE-BX: WDM single-mode SC type.

• 1000BASE-SX/LX: Multimode or single-mode SC type. 1000BASE-BX: WDM single-mode SC type.

• Supports 8192 MAC addresses. Provides 2M bits memory buffer.

• Alarms for power and port link failure by relay output.

• Supports DIN-rail or panel mounting installation.

• RS-232 console, Telnet, SNMP v1 & v2c & v3, RMON, Web Browser, and TFTP management.

724-746-5500 | blackbox.com

Page 2

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

• Field Wiring Terminal: Use copper conductors only, 60/75° C, 12-24 AWG torque value 7 lb-in.

• Operating voltage and Max. current consumption: 0.31 A @ 48 VDC. Power consumption: 123.2 W max. (Full load with PoE),

15 W max. (without PoE).

Physical Description

Designed for rugged environments, Hardened Managed Ethernet Switches provide reliable switching in industrial areas.

Front panel of Front panel of Back panel (all models)

LEH1008A-2MMSC or LEH1008A-2SFP or

LEH1008A-2MMST LEH1008A-2GSFP

9 11

NOTE: LEH1008A (not shown) has (8) RJ-45 ports and no ST, SC, or G1/G2 ports.

Figure 1. LEH1000 Series Hardened Managed Ethernet Switch.

LEH1000 Series switches components.

Number in Figure 1 Product Name Description

1Ports G1 and G2 LEH1008A-2GSFP: (2) GE SFP ports;

LEH1008A-2SFP: (2) SFP ports

NOTE: These connectors are not present on LEH1000A-2MMSC

and LEH1000A-2MMST switches.

2(2) ST or SC fiber ports LEH1008A-2MMSC: (2) 10/100 MM SC ports;

LEH1008A-2MMST: (2) 10/100 MM ST ports

NOTE: These connectors are not present on LEH1008A-2GSFP and

LEH1008A-2SFP switches.

3(8) RJ-45 ports All LEH1000 Series switches: 10/100 Mbps PoE ports

4(8) TX LEDs See the Indicators table on the next page.

5(8) RX LEDs See the Indicators table on the next page.

6Per port: (2) LINK/ACT LEDs See the Indicators table on the next page.

7Per port: (1) PoE LED On when port is connected to a PoE PD (Powered Device).

8(1) Phoenix connector Terminal block for Power 1, Power 2, and Ground

9(1) DC power connector Links to DC power source

10 (1) DB9 connector Used for RS-232 serial control

11 (1) Reset button Press to reset the switch to factory defaults.

724-746-5500 | blackbox.com Page 3

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

LEH1000 Series Switches Indicators.

LED State Indication

Power 1 Steady ON (Green) Power ON

Off Power OFF

Power 2 Steady ON (Green) Power ON

Off Power OFF

Power 3 Steady ON (Green) Power ON

Off Power OFF

10/100BASE-TX, 100BASE-FX/BX

LINK/ACT Steady ON (Green) A valid network connection is established

Flashing Transmitting or receiving data.

NOTE: ACT stands for activity.

100 Steady ON (Green) Connection at 100-Mbps speed.

10/100/1000BASE-SX/LX/BX

LINK/ACT Steady ON (Green) A valid network connection is established

Flashing Transmitting or receiving data.

NOTE: ACT stands for activity.

1000 Steady ON (Green) Connection at 1000-Mbps speed.

Power Input Assignment

Power 3 47–57 VDC DC jack

Power 2 +47–57 VDC

-Power ground

Power 1 +47–57 VDC

-Power ground

Earth ground

Relay output rating 1 A @ 250 VAC

Relay Alarm Assignment

Fault Warning signal disable for the following:

• The relay contact closes if Power 1 and Power 2 both fail, but Power 3 is ON.

• The relay contact closes if Power 3 fails, but Power 1 and Power 2 are ON.

724-746-5500 | blackbox.com

Page 4

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

Console Configuration

STEP 1: Connect to the switch console.

Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232 serial port of the terminal or computer

running the terminal emulation application. For direct access to the administration console, connect a terminal or a PC equipped

with a terminal-emulation program (such as HyperTerminal) directly to the switch console port.

STEP 2: Configure the terminal-emulation program settings.

When using the management method, configure the terminal-emulation program to use the following parameters (you can

change these settings after login):

Default parameters:

• 115,200 bps

• 8 data bits

• No parity

• 1 stop bit

STEP 3: Press the “Enter” key.

The Command Line Interface (CLI) screen should appear.

STEP 4: Log on to Exec Mode (View Mode).

At the “switch_a login:” prompt, type in “root” and press <Enter> to log on to Exec Mode (or View Mode). The “switch_a>”

prompt will show on the screen.

Exec mode (View mode) screen.

724-746-5500 | blackbox.com Page 5

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

STEP 5: Log on to Privileged Exec Mode (Enable Mode).

At the “switch_a>” prompt, type in “enable” and press <Enter> to log on to Privileged Exec Mode (or Enable Mode). The

“switch_a#” prompt will show on the screen.

STEP 6: Log on to Configure Mode (Configure Terminal Mode).

At the “switch_a#” prompt, type in “configure terminal” and press <Enter> to log on to Configure Mode (or Configure Terminal

Mode). The “switch_a(config)#” prompt will show on the screen.

Configure terminal mode screen.

724-746-5500 | blackbox.com

Page 6

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

Web Configuration

STEP 1: Login to the switch.

Specify the default IP address (192.168.1.10) of the switch in the Web browser. A login window will be shown as below:

724-746-5500 | blackbox.com Page 7

LEH1000 Series Hardened Ethernet Switches Quick Start Guide

STEP 2: Log in using the factory default settings.

• Enter the factory default login ID: root.

• Enter the factory default password (no password).

• Click on the “Login” button to log on to the switch.

Welcome screen.

724-746-5500 | blackbox.com

About Black Box

Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks

and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support

available in 60 seconds or less.

Any third-party trademarks appearing in this manual are acknowledged to be the property of their respective owners.

BLACK BOX®

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

Great tech support is just 60 seconds away at 724-746-5500 or blackbox.com.

LEH1008A Quick Start Guide, version 2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Router di rete

Black Box

Black Box LR120A Manuale utente

Black Box

Black Box LEH1208A Manuale utente

Black Box

Black Box LB9017A-R2 Manuale utente

Black Box

Black Box LB9213A Manuale utente

Black Box

Black Box VOE241 Manuale utente

Black Box

Black Box LGB1002A-R2 Manuale utente

Black Box

Black Box Multiport Analog VoIP Gateway Router VOE231A Manuale utente

Black Box

Black Box LB9002A-SC-R3 Manuale utente

Black Box

Black Box LR9601A Manuale utente

Black Box

Black Box Nortel Secure 1001 Manuale utente

Black Box

Black Box LPB1308A-R2 Manuale utente

Black Box

Black Box VOE231 Manuale utente

Black Box

Black Box LB9007A-ST-R3 Manuale utente

Black Box

Black Box IC469A Manuale utente

Black Box

Black Box LGB2007A Manuale utente

Black Box

Black Box COS-4P Manuale utente

Black Box

Black Box WRT750A Manuale utente

Black Box

Black Box LB5000A Guida rapida

Black Box

Black Box LB611A Manuale utente

Black Box

Black Box LB9019A-R2 Manuale utente

Black Box

Black Box VOE212 Manuale utente

Black Box

Black Box LPB5028A Manuale utente

Black Box

Black Box LBS3041AE Manuale utente

Black Box

Black Box LR1530A-EU-R3 Manuale di istruzioni

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza