WHite BaL - ATW (default), PUSH,
MANUAL
atW - the camera automatically samples
the image for optimum white balance
puSH - Allows the white balance to be set
automatically and locked. This option is
normally used when no white reference
is present in the image. To set the white
balance, hold a white object in front of
the camera, with light from the source
falling on it and press the joystick to set and lock the white balance.
- this option allows the Red and Blue gain to be manually set in the
image. Note, using this option requires care to ensure all cameras on one
system have the same color response.
DiSpLaY aDJ
DiSpLaY aDJ - OFF, ON - Press to open submenu.
- 0.35~0.70, default 0.45 - sets
the gamma response of the camera.
This used to compensate for the output
response of different display types. It
can also be used to bring out details in
low light areas of an image.
- Level control
SHarpneSS - Level control
De-BaCK noiSe - Level control
SHaDinG - Level control for lens
reSoLution - Level control
Level control
CooL CoLor - Level control
-
BaCKLiGHt - oFF, BLC, HLC
BLC - Adjust the area to be enhanced and
sets the level. Initial resets the BLC setting
to defaults.
HLC - (High Light Compensation ) Low,
Middle, High. This inverts over exposed
areas from white to black.
ContraSt - oFF, D-WDr, DeFoG
D-WDr- Auto, Manual Actively controls
gamma compensation to provide optimal image exposure in images with
extremes of lighting.
DeFoG - Improves the clarity of image obscured by fog and snow by
analysing the brightness of the image and compensates the color of the
image.
poSi/neGi - Selects what effect you want on the image
- OFF/ON, Set this feature to ON to show a mirror image of the
camera view.
priVaCY Zone - OFF, ON - Press to open submenu.
area no - 1~8, Select the privacy zone
DiSpLaY - Set to on settings will be applied
- sets the X/Y positions of the sides of the
selected zone
initiaL - Pressing enter resets the selected zone to its factory defaults. Only
available when the zone is enabled.
DISPLAY ADJ
GAMMA [ 5]
CHROMA [ 3]
SHARPNESS [ 3]
DE-BACK NOISE [ 3]
SHADING [ 0]
RESOLUTION [ 15]
WARM COLOR [ 8]
COOL COLOR [ 5]
RETURN
Dnr - OFF, ON - Press to open submenu.
LeVeL - LOW, MIDDLE, HIGH - Controls the
level of digital noise reduction applied to
the image. Increasing DNR may soften
the image.
- OFF, ON - Press to open submenu.
SenSitiVitY - Set sensitivity threshold,
A high figure makes the zone more
sensitive.
area-1~4, Select motion detection zone
area uSeͲ If selected “MOTION...” will be
displayed on screen
- sets the
X/Y positions of the sides of the selected
zone.
initiaL - Pressing enter resets the selected zone to its factory defaults. Only
available when the zone is enabled .
- gives access to basic camera
configuration
- OFF, ON turning ON enables
sub menu to enter up to 8 characters for
a camera title.
- Camera Number
iD DiSpLaY - OFF,ON
SYnC - INT, LINELOCK
BauDrate - na
protoCoL - na
LanGuaGe - Default to English
SpeCiaL
Used to correct bad pixils
1-8
Display firmware version
eXit - SAVE, RESTORE, INITIAL. select SAVE to save any changes made to the
camera settings to flash memory and exit the menu. Select RESTORE to reject
any changes made to the camera settings and exit the menu. INITIAL defaults
the camera setting back to default.
ntSC
CCD Sensor 1/3” Advanced High Sensivity Sensor
Eecve Pixels 960 x 494
Resoluon 700TVL
Sensivity 0.05 lux
S/N Rao 52 dB
Day / Night Soware Controlled
Type DC / Manual
Mount CS (C with adaptor)
OSD English/Chinese
Shuer 1/60 ~ 120,000
Flickerless On/O
D-WDR AUTO/MANUAL/Low/Medium/High
DEFOG AUTO/MANUAL/Low/Medium/High
AGC Adjustable Level
SENS UP Adjustable Level 512x
Electronic shuer O/On 1/200,000 sec maximum
Sync Internal
Camera ID Number O/On 1~255
Camera Name O/On, 8 Characters
White Balance ATW/Push/Manual
Backlight O/Low/Middle/High
HLC O/Low/Middle/High
3D DNR Low/Middle/High
Gamma 0.35-0.70
Chroma Gain Adjustable
Moon Detecon 4 areas, O/On, Posion & Sensivity
Privacy masking 8 areas, O/On, Color, Posion
Image funcons Sharpness, Mirror
Video Output CVBS 1.0 Vp-p 75Ω
Programming interface Rear Panel joysck
D Model 24 Vac ±15%
2.1 W Max
Dimension D Model 1.57" x 1.57" x 2.87"
Weight D Model 220g
Mounng 2x ¼” BSW
Operang Temperature 14°F ~ 122 °F (-10°C~+50°C)
Humidity Less than 90%, non condensing
12 Vdc/24 Vac BLK-CDS205NS2
SpeCiFiCationS
IMAGE
BACKLIGHT OFF
CONTRAST OFF
POSI/NEGA POSI
H-MIRROR OFF
PRIVACY OFF
RETURN
MOTION SET
SENSITIVITY [ 5]
AREA 1
AREA USE OFF
TOP [ 84]
BOTTOM [ 119]
LEFT [ 105]
RIGHT [ 172]
INITIAL
RETURN
SYSTEM
CAM TITLE OFF
CAM ID 0-255
ID DISPLAY OFF
SYNC INT
BAUDRATE NA
PROTOCOL NA
LANGUAGE ENG
SPECIAL
RETURN
WHITE BAL MANUAL
WHITE BAL ATW
RED [ 7]
BLUE [ 15]
RETURN
Dnr
DNR
LEVEL LOW
RETURN
© 2012 Observint Technologies, Inc. All rights reserved.
