Blue Star BBB36L2 Manuale utente
USE & CARE MANUAL
Built-in Refrigerator
Part # 250533 revision 0 © Prizer Painter Stove Works, Blandon, PA 19510
2 (800) 449-8691
Thank You and Welcome
Thank you for your purchase and welcome to the BlueStar®family!
BlueStar®appliances are designed for discerning home chefs who demand restaurant-quality results in their own
kitchens. As the owner of a new BlueStar®refrigerator you can look forward to years of precise and even cooling in your
home kitchen.
Here are a few tips to get started:
1. Review this Use & Care Manual, which includes instructions and tips for getting the most out of your new refrigerator.
2. Register your product online at www.bluestarcooking.com/support/product-registration to stay in touch and allow us
to send you valuable product news and updates.
3. Review our products and help us spread the word at https://www.bluestarcooking.com/inspiration/reviews/. We’ll
send you some BlueStar gear to thank you for your time.
Thank you again for choosing BlueStar®.
The BlueStar®Team
Proudly Producing Kitchen Appliances in Pennsylvania since 1880.
bluestarcooking.com 3
Contents Model Information
Safety Information 4
Site Preparation 6
Installation Instructions 8
Models 14
Electronic Control 16
Refrigerator Features 17
Freezer Features 19
Operation 20
Care and Cleaning 22
Troubleshooting 23
Warranty 24
The model and serial numbers can be found on the serial
plate, which is located inside the refrigerator. Slide out the
pull-out tray and the serial plate is on the left side. Please
complete the information below for warranty purposes and
future reference:
Model Number
Serial Number
Installation Date
Dealer’s Name
Dealer’s Phone Number
Register your refrigerator online at
www.bluestarcooking.com or call customer service at
(800) 449-8691.
If service is required under the warranty, it must be
performed by authorized service personnel. BlueStar also
recommends using authorized service personnel if service
is required after the warranty expires. To locate
authorized service personnel in your area, go to
www.bluestarcooking.com or call customer service at
(800) 449-8691.
4 (800) 449-8691
Safety Information
Electrical Shock Hazard
Follow these basic precautions:
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Remove doors from your old refrigerator.
Use nonflammable cleaner.
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Use two or more people to move and install
refrigerator.
Failure to follow these instructions can result in death,
electrical shock, or fire.
Important: Child entrapment and
suffocation are not problems of
the past. Junked or abandoned
refrigerators are still dangerous
even if they will sit for a few
days. Before you throw away
your old refrigerator or freezer,
do the following:
Take off the doors.
Leave the shelves in place so
that children may not easily
climb inside.
Suffocation Hazard
Remove doors from old refrigerators. Failure to follow
these instructions can cause death or brain damage.
Please read and obey the following types of safety
messages to ensure your refrigerator is installed and
operated as safely as possible:
Will cause serious injury or death if instructions are not
followed.
Can cause serious injury or death if instructions are not
followed.
Can cause minor injury or product damage if instructions
are not followed.
DANGER
DANGER
WARNING
WARNING
CAUTION
bluestarcooking.com 5
Important: Le coincement et
l'étouffement des enfants ne
sont pas des problèmes du
passé. Les réfrigérateurs mis au
rebut ou abandonnés restent
dangereux même s'ils doivent
reposer pendant quelques jours.
Avant de jeter votre ancien
réfrigérateur ou congélateur,
observez les consignes
suivantes:
Déposer les portes.
Laisser les étagères en place pour que les enfants ne
puissent pas grimper facilement à l'intérieur.
Renseignements sur la sécurité
Risque d'étouffement
Déposer les portes des anciens réfrigérateurs. Le non-
respect de ces instructions peut entraîner la mort ou des
lésions cérébrales.
DANGER
Risque de choc électrique
Observer les précautions de base suivantes
Brancher l'appareil à une prise triphasée mise à la
terre.
Ne pas retirer la broche de mise à la terre.
Ne pas utiliser d'adaptateur.
Ne pas utiliser de rallonge.
Débrancher l'alimentation avant l'entretien.
Remettre en place toutes les pièces et tous les pan-
neaux avant d'utiliser le produit.
Déposer les portes de votre ancien réfrigérateur.
Utiliser un nettoyant ininflammable.
Garder les matières et les vapeurs inflammables,
comme l'essence, à l'écart du réfrigérateur.
Deux personnes ou plus doivent déplacer et installer
le réfrigérateur.
Le non-respect de ces instructions peut entraîner la mort,
un choc électrique ou un incendie.
Veuillez lire et observer les types suivants de messages
de sécurité pour vous assurer que votre réfrigérateur est
installé et utilisé de la façon la plus sécurisée possible:
Provoque des blessures graves, voire la mort, si les
instructions ne sont pas observées.
Peut entraîner des blessures graves, voire la mort, si les
instructions ne sont pas observées.
Peut entraîner des blessures légères ou des dommages
sur produit si les instructions ne sont pas observées.
DANGER
AVERTISSEMENT
AVERTISSEMENT
MISE EN GARDE
6 (800) 449-8691
Site Preparation
Opening Dimensions
Height: 84”
Width: 35 1/2”
Depth: 24” minimum
For more specific installation options and drawings, go to
www.bluestarcooking.com.
Electrical
Location: The electrical outlet should be located in
the area marked “Electrical” in Fig. 1.
The electrical outlet may also be located
above the enclosure. However, an
access hole would need to be created in
the back left corner of the top of the
enclosure to route the power cord.
Requirements: The electrical outlet must be on a
separate 115VAC, 60Hz, 15 amp circuit
and accept a three-prong grounding
plug.
Risque de choc électrique
La prise électrique doit être vérifiée par un électricien
qualifié pour confirmer qu'elle est conforme aux codes
électriques applicables. Le non-respect de ces
instructions peut entraîner la mort, un choc électrique ou
un incendie.
Electrical Shock Hazard
Electrical outlet must be checked by a qualified electrician
to confirm it meets all applicable electrical codes. Failure
to follow these instructions can result in death, electrical
shock, or fire.
24”
35 1/2”
CAUTION
MISE EN GARDE
bluestarcooking.com 7
Plumbing
Location: The water line should be located in the
area marked “Water” in Fig 1. This area
also extends 10” forward on the floor.
If it is outside this area, it may be
damaged during installation and
prevent the refrigerator from being
installed at the proper depth.
Requirements: The water line must use 1/4” OD
copper, braided stainless steel, or PEX
tubing and have 36” of excess line.
Water Pressure: The water pressure must be between
35-120 psi.
Important: The water line cannot be exposed to
temperatures below freezing.
Connect the water line to the household water supply with
an easily accessible shut-off valve, not a self-piercing
valve. Purge the water line before connecting it to the
refrigerator. This will remove any debris that may be
present.
Fig 1
2 1/2” 9”
10”
15 1/2”
84”
Electrical
6 1/2”
3” Top Anchor Bracket
35 1/2”
Water 3”
Site Preparation
8 (800) 449-8691
Installation Instructions
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed. Use two or more people to move
and install refrigerator. Failure to follow these instructions
can result in death or serious injury.
Risque de renversement
Le réfrigérateur est très lourd et se renverse facilement
quand il n'est pas complètement installé. Deux personnes
ou plus doivent déplacer et installer le réfrigérateur. Le
non-respect de ces instructions peut entraîner la mort ou
des blessures graves.
Tools and Materials
Phillips screwdriver
Flat blade screwdriver
Power drill and drill bits (for anchor bracket)
Stud finder (for anchor bracket)
1/2” socket wrench
Tubing cutter (for water line)
3’ of 1/4” OD copper, braided stainless steel, or PEX
tubing (for water line)
Saddle valve (for water line)
1/2” open end wrench
5/16” hex head socket
Gloves
Safety glasses Step 1 —Uncrate and Inspect Refrigerator
Before starting the installation, uncrate and inspect
the refrigerator. Remove the packing materials but do
not discard the anchor bracket, toe grille, and
associated hardware.
Step 2 —Install Anchor Bracket
The anchor bracket is attached to the top of the
refrigerator during shipping. Remove it by lifting the
top grille and removing the two bolts with a 1/2”
socket wrench. Save the bolts and any washers to
use when anchoring the refrigerator in the final
position in Step 4.
WARNING
AVERTISSEMENT
bluestarcooking.com 9
Step 2 —Install Anchor Bracket (continued)
Install the anchor bracket on the back wall of the
enclosure. The notch in the back of the bracket
should be centered in the enclosure (from side to
side). Secure the anchor bracket with at least two
screws spaced far apart, close to the sides of the
bracket. Wood screws and self drilling sheet metal
screws are located in the plastic bag with the
literature. Screws must be securely threaded into
wood or metal studs that are structurally sound and
part of the building structure.
Step 3 —Route Water Line
Locate the household water line as shown below prior
to moving the refrigerator into position. It may be
helpful to tape the water line to the floor to avoid
damaging it as the refrigerator is rolled into position.
Tip Over Hazard
Anchor bracket must be installed properly to prevent
refrigerator from tipping. Failure to follow these
instructions can result in death or serious injury.
Risque de renversement
Le support d'ancrage doit être installé correctement pour
empêcher le renversement du réfrigérateur. Le non-
respect de ces instructions peut entraîner la mort ou des
blessures graves.
WARNING
AVERTISSEMENT
81”
To Floor To Floor
Back Wall of Enclosure
84”
Installation Instructions
10 (800) 449-8691
Installation Instructions
Step 4 —Move Refrigerator into Position
Remove the wood base with a 1/2” socket or open
end wrench and discard the shipping bolts and
brackets. Use an appliance cart to move the
refrigerator near the front of the enclosure. To allow
the refrigerator to be rolled into position, ensure the
front feet are retracted with a 1/2” open end wrench.
Front and rear leveling can be done from the front
once the refrigerator is in position.
Important: If the refrigerator has been on its back or side,
it must stand upright for a minimum of 24 hours before
connecting power.
Plug the power cord into the grounded outlet.
Temporarily lift the anchor bracket away from the top
of the refrigerator. It may be helpful to temporarily
tape the front of the anchor bracket to the top of the
enclosure so it does not obstruct moving the
refrigerator into position. Roll the refrigerator into
position, ensuring the water line does not interfere
underneath and the power cord does not interfere at
the back. Slack in the power cord may be taken up in
the space around the water filter.
Important: If the floor is not level, it may be necessary to
level the refrigerator prior to rolling it into the enclosure.
See Step 6 on leveling to temporarily tilt the refrigerator.
Final leveling can be done from the front.
Lift the top grille and align the slots in the upper
cabinet with the holes in the anchor bracket. Install
anchor bolts and any washers (from Step 2) with a
1/2” socket or open end wrench but do not tighten
until leveling is complete.
Important: If the mounting holes do not align with the
slots in the top of the cabinet behind the top grille, it may
be necessary to roll the refrigerator out of the enclosure,
loosen the anchor bracket screws on the back wall, slide
the bracket left or right, and retighten the screws.
Step 5 —Connect Water Line
Place the sleeve and nut on the household water line
under the refrigerator and fasten it to the connection
at the end of the tubing with a 1/2” open end wrench.
The sleeve and nut are located in the plastic bag with
the literature. Do not over-tighten. Check all water line
fittings for leaks.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Blue Star Frigorifero
