Blue SADIE Manuale utente
SADIE
Premium headphones with built-in audiophile amp
Casque haut de gamme à ampli audiophile intégré
TRANSFORMING YOUR LAPTOP,
ONE TRACK AT A TIME
The rebellion against headphone convention has
begun. We have come to accept compromises in
our headphones—settling for mobility over fidelity.
Headphones are the last barrier to a consistent
listening experience across all your sources.
Sadie liberates digital music from overhyped
playback and delivers a true high-fidelity
experience to your laptop and mobile devices.
2
POWER TO THE PEOPLE.
Sadie is a groundbreaking headphone that
integrates an audiophile amplifier with precision
drivers to introduce an unprecedented listening
experience. Sadie improves the audio performance
of all your devices—from laptops, to tablets and
even your phone—delivering insanely great sound
anywhere you go. An innovative new structural
design brings you total comfort and an easily
customizable fit. Featuring impeccable sonic
performance, massive power, and multiple amp
modes, Sadie is going to blow your mind.
3
START ME UP.
Although your Sadie was charged when it began
its journey to you, we recommend recharging
before your first use, as you will probably be unable
to stop listening once you put them on. To charge,
plug the supplied USB cable into a USB port. Sadie
will be fully charged in 3-4 hours, and will give you
approximately 12 hours of life-changing playtime.
Sadie is designed to know when you’re listening
and when you’re not—it turns on and off
automatically when the headphones are opened
and closed. This saves big on battery life, and
ensures that Sadie is always ready for action.
Listen long, and listen often.
Sadie comes with two cables: a 1.2-meter cable
with built-in controls and microphone for Apple
iPhone and iPad, and a standard 3-meter cable.
To plug in, insert the long end of either cable into
the left earcup opening.
4
ON:
The Sadie amplifier is engaged and
delivers natural sound with a greatly
increased dynamic range. This mode
provides the fidelity and performance of
a hi-fi system, anywhere. Sadie will also
minimize the load on the output of your
device, improving its audio performance
so Sadie can feed on better quality audio.
ON+:
This setting applies the amplifier’s analog
low-frequency enhancement circuit,
which delivers incredibly deep and
smooth bass. This mode is particularly
nice for tracks that were mastered in
the “vinyl” era and could use some extra
low-end support. No DSP tricks here—
this is all analog, baby.
OFF:
Sadie works in passive mode without
using the amplifier. In this mode, Sadie
delivers natural sound at a lower
volume—ideal for use with an external
headphone amp or other high-output
pro audio gear. And…Sadie will operate
in this mode even when the battery is
at the end of its charge, which means
no more music blackouts. Ever. Like
emergency headphones without having
to break the glass.
SHAKE IT UP.
Because variety is the spice of life, Sadie lets you easily switch between sound profiles via three amplifier
modes. Now you can tailor your experience to the type of music you’re listening to, right on the headphones—
no more messing around with your device’s on-screen audio settings. So go ahead, switch it up a little.
CARACTÉRISTIQUES
DU CASQUE
Poids: 444 g
Dimensions extérieures :
(fermé) 21cm x14cm x12cm
(ouvert) 18cm x 29cm x 12cm
5
IT MIGHT GET LOUD.
Because of the high-performance internal
amplifier, Sadie gets loud. Like, really loud. But
more importantly, Sadie’s built-in amp allows
for more accurate performance—so you’ll
always enjoy great-sounding audio.
Start with a low volume level on your source
device and adjust up to a comfortable level.
We’re sure Sadie will blow your mind, but
let’s not make it happen literally.
INTO THE LIGHT.
Sadie is equipped with backlights in both earcups,
which not only look awesome, but also indicate
the various battery/charging modes.
Solid: The Sadie amplifier is powered on and
functioning.
Off: The Sadie amplifier is powered off and the
headphones are operating in passive mode.
Rapid blink/pulse: Battery life has 15% remaining.
Time to recharge.
Slow blink/pulse: Battery is charging.
6
Here are the full Sadie specifications:
DRIVER SPECS
Type and size: 50mm, fiber-reinforced
dynamic driver
Impedance: 42 ohms
Frequency
response: 15Hz-20kHz
Enclosure details: Sealed enclosure
with tuned
damping materials
AMPLIFIER SPECS
Output power: 240mW
THD+N: 0.004%
Frequency response: 15Hz-20kHz
SNR, self noise: >105 dB
Noise: < 20 uV
Battery capacity: 1000mAh
HEADPHONE SPECS
Weight: 444g (15.67 oz)
Outer dimensions
(closed) 21cm x14cm x12cm
8.27” x 5.51” x 4.72”
(open) 18cm x 29cm x 12cm
7.09” x 11.42” x 4.72”
FOR THOSE ABOUT TO ROCK.
WARNING: Do not expose the headphone and internal battery to excessive heat or heat generating sources.
7
8
ANY WAY YOU WANT IT.
Sadie’s multi-jointed headband provides individual fit and comfort
while adapting to any head shape and size. If you make adjustments during
use, the headphones will stay in place until you readjust them.
Sadie’s 1.2-meter audio cable includes built-in controls
and microphone for Apple iPhone and iPad:
Volume increase.
Toggles Play/Pause. Press 2X for track forward, and 3X for track repeat.
Volume decrease.
1
1
2
2
3
3
JUST WHAT I NEEDED.
Your Sadie package contains:
• Sadie
• Soft case
• 1.2-meter audio cable with microphone
and Apple iPhone and iPad controls
• 3 meter audio cable
• 1 meter USB charging cable
• 3.5mm to 1/4” adaptor
• User manual
• Registration and warranty information
9
PRODUCT REGISTRATION
Please take a moment and register Sadie with us.
It’ll only take a minute, and we guarantee you’ll sleep better at night.
As our way of saying thanks we’ll provide you with:
• FREE PRODUCT SUPPORT
• OFFERS FOR DISCOUNTS ON OUR WEBSTORE
• MORE COOL STUFF
Please register at: bluemic.com/register
10
Indice
Lingue:
Altri manuali Blue Cuffie
