Unpacking the BØRRESEN 01 Loudspeakers
BØRRESEN Loudspeaker models are protected during transport by stable and secure packaging.
Due to their weight and dimensions, they are shipped in a special, double layer box.
Unpacking:
Please consult your BØRRESEN dealer who in most cases will unpack and set up your new product.
To unpack the BØRRESEN 01 - stands : C
1. Carefully lay the transport boxes at on a plane oor.
2. Open the outer box, do not use knife or sharp instruments to break the tape.
3. Remove the top foam and carefully lift the stand from its place.
4. Repeat this with the other stand box.
5. Place the stands where you want them, and prepare both stands for
mounting the loudspeaker.
To unpack the BØRRESEN 01 - loudspeakers: A
1. Carefully lay the transport box at on a plane oor.
2. Remove the straps from the outer carton and pull the lid to reveal the inner box.
3. Open the inner box, do not use knife or sharp instruments to break the tape.
4. Remove the top foam and nd the 2x3 Darkz decouplers B.
5. Place the Darkz, one in each of the three pits on the stand D.
5. Carefully lift the rst loudspeaker out of the box and place it, tting the Darkz to the
pits beneath the speaker D. Repeat with speaker 2.
6. Check that the Loudspeaker is xed rmly to the stand/Darkz in a sidewards direction.
7. The speakers is not supposed to be xed in uopwards direction.
4
