Bosch AMC2 Series Manuale utente

AMC2 enclosure with 1 DIN rail

AEC‑AMC2‑UL01

en Installation manual

AMC2 enclosure with 1 DIN rail Table of contents | en 3

Bosch Security Systems B.V. 2021-03 | V06 | F.01U.330.018

Table of contents

1System overview 4

1.1 Components of the enclosure 4

1.2 Parts included 6

2Mounting the enclosure 8

3Connections 9

3.1 Connecting the devices 9

3.2 Connecting the cables 11

3.3 Connections for supporting Universal Power Supply 13

3.3.1 12 V mode operation 14

3.3.2 24 V mode operation 16

4Appendices 18

4.1 UL requirements 18

4.2 More information 19

4en | System overview AMC2 enclosure with 1 DIN rail

2021-03 | V06 | F.01U.330.018 Bosch Security Systems B.V.

1 System overview

1.1 Components of the enclosure

1 2 3 4

Figure1.1: Components of the enclosure

Position Description

1 Cover grounding point

2 Mounting rail for power supply unit (PSU) and

Access Modular Controller (AMC2)

3 AMC2 grounding point

4 Cable knock-outs for reader and signal cables

5 Temperature sensor bracket

6 Tamper contact

7 Fixing bracket for rechargeable batteries

8 Main grounding point

AMC2 enclosure with 1 DIN rail System overview | en 5

Bosch Security Systems B.V. 2021-03 | V06 | F.01U.330.018

Position Description

9 Label

10 Knock-out for the power cable connection

11 Three pin connector

12 Bracket for LED

13 Name plate

6en | System overview AMC2 enclosure with 1 DIN rail

2021-03 | V06 | F.01U.330.018 Bosch Security Systems B.V.

1.2 Parts included

x2A B

AMC2 enclosure with 1 DIN rail System overview | en 7

Bosch Security Systems B.V. 2021-03 | V06 | F.01U.330.018

Position Description

A Cable ties to secure cables

B Three screw anchors S8 and M6 × 50 screws

C Bracket for cable fixing

D Cover grounding cable

E Battery cable

F Power supply cable (AMC2)

G Power supply cable (battery)

H Cover contact wired

I Power cable with LED indicator (UL required)

8en | Mounting the enclosure AMC2 enclosure with 1 DIN rail

2021-03 | V06 | F.01U.330.018 Bosch Security Systems B.V.

2 Mounting the enclosure

The enclosure is designed to be mounted on a wall.

1. Open the door lock of the enclosure with the provided key.

2. Hold the enclosure at the desired position against the wall.

3. Mark the mounting holes on the wall with a pencil.

4. Put the enclosure aside.

5. Drill the holes at the points that you previously marked on

the wall.

6. Insert the screw anchors in the drilled holes.

7. Drive the screws halfway into the top and bottom left screw

anchors.

8. Hang the enclosure on the wall, according to the position of

the screw anchors.

9. Drive the third screw into the anchor on the bottom right.

10. Tighten all screws.

– The enclosure is installed.

86,5 mm

3,406 in

401 mm

15,787 in

352,5 mm

13,878 in

5 mm

0,197 in

318 mm

12,52 in

10 mm

0,394 in

5 mm

0,197 in

10 mm

0,394 in

200,5 mm

7,894 in

Figure2.1: Dimensions of the enclosure

AMC2 enclosure with 1 DIN rail Connections | en 9

Bosch Security Systems B.V. 2021-03 | V06 | F.01U.330.018

3 Connections

3.1 Connecting the devices

Precondition: Install readers and other peripheral devices as

described in the corresponding technical documentation.

N G L1

BAT RTH

Power Supply

AMC2 controller /

AMC2 extension

RS-485 EXT T

---- OK ----

L N + - + - + -C DC BAT AC 1 2 3 4 5 6 7

1 2 3 4 5 6 1 2

Figure3.1: Connections in the enclosure

1. Insert the cables of the device through the knock-outs at

the top-right side wall of the enclosure, or through the rear

of the enclosure.

2. Provide an appropriate disconnect device to the supply

line.

Warning!

Risk of electric shock!

Disconnect the mains supply voltage before you work on the

devices inside the enclosure.

10 en | Connections AMC2 enclosure with 1 DIN rail

2021-03 | V06 | F.01U.330.018 Bosch Security Systems B.V.

Installing the components

1. Mount the Access Modular Controller (AMC2) on the right-

hand side of the mounting rail.

2. Mount the power supply unit on the left-hand side of the

mounting rail.

3. If you are using rechargeable batteries, install the batteries

at the bottom of the enclosure and secure them with a

fixing bracket.

Altri manuali per AMC2 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bosch Allegato

Bosch

Bosch FAS-420-TM-HB Manuale utente

Bosch

Bosch AE20 Manuale utente

Bosch

Bosch AE20 Manuale utente

Bosch

Bosch D8108A Manuale utente

Bosch

Bosch B10R Manuale utente

Bosch

Bosch AMC2 VdS Manuale utente

Bosch

Bosch AEC-AMC2-UL01 Manuale utente

Bosch

Bosch AMC2 Series Manuale utente

Bosch

Bosch D8108A Manuale utente

Bosch

Bosch FPA-5000 Manuale utente

Bosch

Bosch B8103 Manuale utente

Bosch

Bosch HCP 0006 A Manuale utente

Bosch

Bosch D203 Istruzioni operative e di manutenzione

Bosch

Bosch CPH 0006 A Manuale utente

Bosch

Bosch AMC2 Series Manuale utente

Bosch

Bosch D8108A Manuale utente

Bosch

Bosch AE2 Manuale utente

Bosch

Bosch DSA E-Series (E2700) Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente