Bosch AMC2 Series Manuale utente
AMC2 enclosure with 2 DIN rails
AEC‑AMC2‑UL02
en Installation manual
AMC2 enclosure with 2
DIN rails Table of contents | en 3
Bosch Security Systems B.V. 2019-12 | V03 | F.01U.330.017
Table of contents
1System overview 4
1.1 Components of the enclosure 4
1.2 Parts included 6
1.3 Cables to be assembled 8
2Mounting the enclosure 10
3Connections 12
3.1 Connecting the devices 12
3.2 Connecting the cables 14
3.3 Connections for supporting Universal Power Supply 16
3.3.1 12 V mode operation 17
3.3.2 24 V mode operation 19
4Appendices 21
4.1 UL requirements 21
4.2 Cable assembly 22
4en | System overview AMC2 enclosure with 2
DIN rails
2019-12 | V03 | F.01U.330.017 Bosch Security Systems B.V.
1 System overview
1.1 Components of the enclosure
15
10 14
2 4
6
13
7
3
8
11
12
9
Figure1.1: Components of the enclosure
Position Description
1 Cover grounding point
2 Main grounding point
AMC2 enclosure with 2
DIN rails System overview | en 5
Bosch Security Systems B.V. 2019-12 | V03 | F.01U.330.017
Position Description
3 Mounting rail for power supply unit (PSU)
and Access Modular Controller (AMC2)
4 AMC2 grounding point
5 Cable knock-outs for reader and signal cables
6 Tamper contact
7 Temperature sensor bracket
8 Fixing bracket for rechargeable batteries
9 AMC-EXT grounding point
10 Label
11 Knock-out for the power cable connection
12 Three pin connector
13 Bracket for LED
14 Name plate
6en | System overview AMC2 enclosure with 2
DIN rails
2019-12 | V03 | F.01U.330.017 Bosch Security Systems B.V.
1.2 Parts included
x1
E
x3 x1
x1
x2A
BC
D
AMC2 enclosure with 2
DIN rails System overview | en 7
Bosch Security Systems B.V. 2019-12 | V03 | F.01U.330.017
Position Description
A Cable ties to secure cables
B Three screw anchors S8 and M6 × 50 screws
C Bracket for cable fixing
D Fuse and fuse holder
E LED
8en | System overview AMC2 enclosure with 2
DIN rails
2019-12 | V03 | F.01U.330.017 Bosch Security Systems B.V.
1.3 Cables to be assembled
E
A
C
D
B
F
G
Position Description
A Power supply cable (AMC2)
B Power supply cable (battery)
C Battery cable
D Cover ground cable
E Cover contact wired
AMC2 enclosure with 2
DIN rails System overview | en 9
Bosch Security Systems B.V. 2019-12 | V03 | F.01U.330.017
Position Description
F Power cable
G Power cable with LED indicator (UL required)
10 en | Mounting the enclosure AMC2 enclosure with 2
DIN rails
2019-12 | V03 | F.01U.330.017 Bosch Security Systems B.V.
2 Mounting the enclosure
The enclosure is designed to be mounted on a wall.
1. Open the door lock of the enclosure with the provided key.
2. Hold the enclosure at the desired position against the wall.
3. Mark the mounting holes on the wall with a pencil.
4. Put the enclosure aside.
5. Drill the holes at the points that you previously marked on
the wall.
6. Insert the screw anchors in the drilled holes.
7. Drive the screws halfway into the top and bottom left screw
anchors.
8. Hang the enclosure on the wall, according to the position of
the screw anchors.
9. Drive the third screw into the anchor on the bottom right.
10. Tighten all screws.
– The enclosure is installed.
Altri manuali per AMC2 Series
6
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bosch Allegato
Bosch
Bosch HCP 0006 A Manuale utente
Bosch
Bosch D8108A Manuale utente
Bosch
Bosch B8103 Manuale utente
Bosch
Bosch FAS-420-TM-HB Manuale utente
Bosch
Bosch D203 Istruzioni operative e di manutenzione
Bosch
Bosch D8108A Manuale utente
Bosch
Bosch AE20 Manuale utente
Bosch
Bosch D8108A Manuale utente
Bosch
Bosch AE2 Manuale utente
Bosch
Bosch FPA-5000 Manuale utente
