Bosch NDC-265-P Manuale utente

IP Camera 200 Series

NDC-265-P

en Installation and Operation Manual

IP Camera 200 Series Table of Contents | en 3

Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01

Table of Contents

1Safety 7

1.1 Safety precautions 7

1.2 Important safety instructions 8

1.3 FCC & ICES compliance 9

1.4 UL certification 10

1.5 Bosch notices 10

1.6 Copyrights 11

2 Introduction 13

2.1 Features 13

2.2 Unpacking 14

3 Installation 15

3.1 Disassembly 15

3.2 MicroSDHC card 16

3.3 Network (and power) connector 17

3.4 Power connection 18

3.4.1 DC power connection 18

3.5 I/O connector 19

3.6 Audio connectors 20

3.7 Mounting 21

3.8 Camera set-up 22

3.8.1 Camera positioning 22

3.8.2 Focal length and focus 24

3.9 Resetting the camera 25

3.10 Closing the unit 25

4 Browser connection 27

4.1 System requirements 27

4.2 Establishing the connection 27

4.2.1 Password protection in camera 28

4.3 Protected network 28

4.4 Connection established 29

4en | Table of Contents IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

4.4.1 LIVEPAGE 29

4.4.2 RECORDINGS 29

4.4.3 SETTINGS 29

5 Basic Mode 31

5.1 Basic Mode menu tree 31

5.2 Device Access 32

5.2.1 Camera name 32

5.2.2 Password 32

5.3 Date/Time 33

5.4 Network 34

5.5 Encoder 35

5.6 Audio 35

5.7 Recording 35

5.7.1 Storage medium 35

5.8 System Overview 35

6 Advanced Mode 37

6.1 Advanced Mode menu tree 37

6.2 General 38

6.2.1 Identification 38

6.2.2 Password 38

6.2.3 Date/Time 40

6.2.4 Display Stamping 41

6.3 Web Interface 43

6.3.1 Appearance 43

6.3.2 LIVEPAGE Functions 44

6.3.3 Logging 45

6.4 Camera 46

6.4.1 Picture Settings 46

6.4.2 Encoder Profile 48

6.4.3 Encoder Streams 52

6.4.4 Audio 53

6.4.5 Installer Menu 54

6.5 Recording 55

6.5.1 Storage Management 56

IP Camera 200 Series Table of Contents | en 5

Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01

6.5.2 Recording Profiles 59

6.5.3 Retention Time 61

6.5.4 Recording Scheduler 62

6.5.5 Recording Status 63

6.6 Alarm 64

6.6.1 Alarm Connections 64

6.6.2 Video Content Analyses (VCA) 67

6.6.3 VCA configuration- Profiles 68

6.6.4 VCA configuration - Scheduled 74

6.6.5 VCA configuration - Event triggered 76

6.6.6 Audio Alarm 77

6.6.7 Alarm E-Mail 78

6.7 Interfaces 80

6.7.1 Alarm input 80

6.7.2 Relay 80

6.8 Network 82

6.8.1 Network Access 82

6.8.2 Advanced 86

6.8.3 Multicast 87

6.8.4 FTP Posting 89

6.9 Service 90

6.9.1 Maintenance 90

6.9.2 System Overview 92

7 Operation via the browser 93

7.1 Livepage 93

7.1.1 Processor load 93

7.1.2 Image selection 94

7.1.3 Digital I/O 95

7.1.4 System Log / Event Log 95

7.1.5 Saving snapshots 96

7.1.6 Recording video sequences 96

7.1.7 Running recording program 96

7.1.8 Audio communication 96

7.2 Recordings page 98

7.2.1 Controlling playback 98

6en | Table of Contents IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

8Troubleshooting 101

8.1 LED indicators 101

8.2 Resolving problems 101

8.3 Customer service 101

9 Maintenance 103

9.1 Repairs 103

9.1.1 Transfer and disposal 103

10 Technical Data 105

10.1 Specifications 105

10.1.1 Accessories 106

IP Camera 200 Series Safety | en 7

Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the device.

8en | Safety IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Generally, using a dry cloth for cleaning is

sufficient but a moist, fluff-free cloth or leather shammy

may also be used. Do not use liquid cleaners or aerosol

cleaners.

2. Heat Sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other

equipment (including amplifiers) that produce heat.

3. Water - Never spill liquid of any kind on the unit.

4. Lightning - Take precautions to protect the unit from

power and lightning surges.

5. Controls adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit.

6. Power sources - Operate the unit only from the type of

power source indicated on the label.

7. Servicing - Unless qualified, do not attempt to service this

unit yourself. Refer all servicing to qualified service

personnel.

8. Replacement parts - Use only replacement parts specified

by the manufacturer.

9. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

10. Attachments, changes or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change or modification of the equipment, not

expressly approved by Bosch, could void the warranty or,

in the case of an authorization agreement, authority to

operate the equipment.

IP Camera 200 Series Safety | en 9

Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01

1.3 FCC & ICES compliance

FCC & ICES Information

(U.S.A. and Canadian Models Only)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult

the dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office,

Washington, DC 20402, Stock No. 004-000-00345-4.

10 en | Safety IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

1.4 UL certification

Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the

performance or reliability of the security or signaling aspects of

this product. UL has only tested fire, shock and/or casualty

hazards as outlined in UL's Standard(s) for Safety for Closed

Circuit Television Equipment, UL 2044. UL Certification does not

cover the performance or reliability of the security or signaling

aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR

CERTIFICATIONS WHATSOEVER REGARDING THE

PERFORMANCE OR RELIABILITY OF ANY SECURITY OR

SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

1.5 Bosch notices

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that

electronic and electrical appliances, which have reached the

end of their working life, must be collected and disposed of

separately from household waste material. Separate collecting

systems are usually in place for disused electronic and

electrical products. Please dispose of these devices at an

environmentally compatible recycling facility, per European

Directive 2002/96/EC

Altri manuali per NDC-265-P

Indice

Altri manuali Bosch Telecamera IP

Bosch

Bosch NDN-265-PIO Istruzioni per l’uso

Bosch

Bosch NEC-070V09-21W Manuale utente

Bosch

Bosch NBC-255-P Manuale utente

Bosch

Bosch NWC?0495 Manuale utente

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 Manuale utente

Bosch

Bosch NDN-921 Manuale utente

Bosch

Bosch NUC-52051-F0E Manuale utente

Bosch

Bosch NBC-255-P Manuale utente

Bosch

Bosch FlexiDome NDN-498V03-21P Manuale utente

Bosch

Bosch MIC Series 550 Manuale utente

Bosch

Bosch A1 Security Cameras IR Illuminator 5000... Manuale di installazione e funzionamento

Bosch

Bosch MIC-7130 Manuale utente

Bosch

Bosch NDN-50022-A3 Manuale utente

Bosch

Bosch Onvif NTC-255-PI Istruzioni per l’uso

Bosch

Bosch FLEXIDOME IP NIN-70122 Manuale utente

Bosch

Bosch NII-41012-V3 Manuale utente

Bosch

Bosch AUTODOME 7100i Manuale utente

Bosch

Bosch Autodome IP 4000 HD Istruzioni per il montaggio

Bosch

Bosch MegaPixel NWC-0800 Manuale utente

Bosch

Bosch DinionHD NBN-921 Manuale utente

Bosch

Bosch NBC-265-W Manuale utente

Bosch

Bosch NEC-070V09-21W Manuale utente

Bosch

Bosch NIN-51022-V3 Manuale utente

Bosch

Bosch DINION IP starlight 8000 MP Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente