Bosch ISW-BMC1-M82X Come usare

Wireless Local Security Network wLSN

Release Notes October 2006

1.0 Compatibility

wLSN is compatible with the Easy Series V2+

Intrusion Control Panel.

2.0 Known Issues

2.1 General Information

CAUTION: If you have unused wireless

devices, replace the battery tabs or

remove the batteries to prevent battery

depletion.

•Returning a Device to an Undiscovered State:

In the wLSN Reference Guide (P/N: F01U009440),

Section 2.4 Site Testing explains how to return a

device to the undiscovered state. This explanation

is incorrect. Below is the correct procedure:

1. Remove the batteries.

2. Press and hold the tamper switch button.

3. Reinsert the batteries while holding the

tamper switch button.

The device’s LED turns on.

4. Release the tamper switch button within five

sec. after the device’s LED turns on.

The device returns to an undiscovered state.

•Magnet Placement for Door-Window Contact,

Mini Door-Window Contact, and Inertia

Detector: The magnet can be placed on either

side of these devices.

2.2 Mini Door-Window Contact

(ISW-BMC1-M82X)

Tamper Switch Location: Refer to Figure 1 for the

location of the tamper switch on the Mini Door-

Window Contact.

Figure 1: Tamper Switch Location

2.3 Recessed Door-Window Contact

(ISW-BMC1-R135X)

Tamper Switch Location: Refer to Figure 2 for the

location of the tamper switch on the Recessed Door-

Window Contact.

Figure 2: Tamper Switch Location

2.4 Glassbreak Detector

(ISW-BGB1-SAX)

•RF Signal Strength (RFSS) Mode LED

Location: Refer to Figure 3 for the location of the

LED that turns on when the detector enters RFSS

Mode.

Figure 3: RFSS Mode LED Location

www.boschsecuritysystems.com

F01U032063B

Release Notes

10/0

wLS

Page 2 of

•Entering RFSS Mode with Wall Tamper Tab

Removed:

1. Take the detector to its planned mounting

location.

2. Remove and reinsert the batteries.

3. Press and hold the wall tamper switch.

Refer to Figure 4.

4. Quickly press and release the cover tamper

switch four times. Refer to Figure 5.

The detector enters RFSS Mode.

Figure 4: Wall Tamper Switch Location

Figure 5: Cover Tamper Switch Location

•Returning a Glassbreak Detector with the

Wall Tamper Tab Removed to an

Undiscovered State:

1. Remove the batteries from the detector.

2. Place the detector on a flat surface to depress

the wall tamper switch.

Refer to Figure 4.

3. Press and hold the cover tamper switch.

Refer to Figure 5.

4. While both tamper switches are depressed,

reinsert the batteries.

The RFSS Mode LED turns on. Refer to

Figure 3 on page 1.

5. Release the cover tamper switch within five

sec. after the RFSS Mode LED turns on.

The detector returns to an undiscovered state.

2.5 wLSN Key Fob

(ISW-BKF1-H5X)

Programmable Buttons: To operate the

programmable buttons, press and hold either button

for at least 1 sec. Refer to Figure 6.

Figure 6: Programmable Button Locations

Altri manuali per ISW-BMC1-M82X

Questo manuale è adatto per i seguenti modelli

Altri manuali Bosch Sistema di sicurezza

Bosch

Bosch FNM-320 Series Manuale utente

Bosch

Bosch PVA-1EB Manuale utente

Bosch

Bosch Security System Manuale utente

Bosch

Bosch SOLUTION 6000 Manuale utente

Bosch

Bosch ICP-VR8488 Manuale utente

Bosch

Bosch DS7400Xi Manuale utente

Bosch

Bosch DIVAR IP 3000 Manuale utente

Bosch

Bosch SOLUTION 6000 Manuale utente

Bosch

Bosch Plena Power Amplifier Istruzioni per il montaggio

Bosch

Bosch MBV-BPRO-45 Foglio di istruzioni

Bosch

Bosch PR111B Manuale utente

Bosch

Bosch LTC 8850 Series Manuale utente

Bosch

Bosch Praesideo Manuale utente

Bosch

Bosch Solution 64 Manuale utente

Bosch

Bosch PRAESENSA PRA-SCL Foglio di istruzioni

Bosch

Bosch D9000 Series Guida alla configurazione

Bosch

Bosch CCS 800 Ultro Manuale utente

Bosch

Bosch 7100 Manuale utente

Bosch

Bosch ISW-BKF1-H5X Manuale utente

Bosch

Bosch DIVAR DIP-7080-00N Manuale utente

Bosch

Bosch Fire System Manuale utente

Bosch

Bosch Solution 64 Manuale utente

Bosch

Bosch SM120RW Manuale utente

Bosch

Bosch Solution 16i Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente