Bosch UEZ Manuale utente

614–30.0212.0270–01 A2 1

OPERATING

INSTRUCTIONS UEZ – Intrusion Alarm

30.0221.9701A2

Introduction and Notes on Security 3. . . . . . . . . . . . . . . . . .

Explanation of Display and Operating Elements 4. . . . . . .

Display/operating panel 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Individual/group displays (LED) 5. . . . . . . . . . . . . . . . . . . . . . .

Message processing keys / softkeys with display 6. . . . . . . . .

Fixed function keys 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cursor keys 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Key switch 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sealed switch 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message Display/Processing

Explanation of display messages 11. . . . . . . . . . . . . . . . . . . . .

Messages with message processing keys 12. . . . . . . . . . . . .

Calling up a list of all message types 13. . . . . . . . . . . . . . . . .

Alarm Verification: see page 48

continued on next page

Message Display/Processing

Resetting the central control unit 14. . . . . . . . . . . . . . . . . . . .

Resetting detector zones/message types 15. . . . . . . . . . . .

Resetting with “General Reset” 16. . . . . . . . . . . . . . . . . . . . .

Arming the System 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Timer–Controlled Switching

Timer–controlled activation (TCA) 18. . . . . . . . . . . . . . . . . . .

Timer–controlled deactivation 19. . . . . . . . . . . . . . . . . . . . . .

Operation Authorisation

User Code 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Basic/complete/maintenance operation 21. . . . . . . . . . . . .

Table of Contents

614–30.0212.0270–01 A2 2

Table of Contents

Operating the Functions in the Main Menu

Calling up/quitting the Main Menu and Submenus 24.

Viewing the Alarm Counter 24. . . . . . . . . . . . . . . . . . . . . . .

Areas (Status Interrogation)

–Interrogation of the zone status 25. . . . . . . . . . . . . . . . . . .

–Switch block type lock lamps on/off 26. . . . . . . . . . . . . . . .

–Skip detector zones and malfunctions 26. . . . . . . . . . . . .

Internal Program

–Switch internal program on/off 27. . . . . . . . . . . . . . . . . . . .

–Edit internal program 28. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switch Visual Test on/off 29. . . . . . . . . . . . . . . . . . . . . . . . .

Timer

–Switch timer channels on/off 30. . . . . . . . . . . . . . . . . . . . . .

–Change switching times 31. . . . . . . . . . . . . . . . . . . . . . . . .

Background Memory

–View background memory 32. . . . . . . . . . . . . . . . . . . . . . .

–Going to a certain event 33. . . . . . . . . . . . . . . . . . . . . . . . .

(event number, date, latest)

–Select/search events 34. . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Print events 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Diagnosis 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating the Functions in the Main Menu

Changing the Operator Code 37. . . . . . . . . . . . . . . . . . . . . . .

Switching on/off

–Switch group list on/off 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Switch detector zones on/off 39. . . . . . . . . . . . . . . . . . . . . . .

–Switch detectors on/off 40. . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Switch tableau points on/off 41. . . . . . . . . . . . . . . . . . . . . . . .

–Switch sounders/strobes on/off 42. . . . . . . . . . . . . . . . . . . . .

Maintenance 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Blocking

–Block zones 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Block detectors 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Parameters

–Change date/time 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–Change PC interface 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alarm Verification 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

614–30.0212.0270–01 A2 3

Introduction and Notes on Security

BOSCH Telecom Service Center:

Telephone:

The UEZ must only be operated by trained personnel!

For safety reasons and to prevent unauthorised

operation, only these personnel should know the

authorisation code required to operate the system.

What information is contained in these operating instruc-

tions?

These instructions contain all the information that you require

to operate the UEZ.

What information is not contained in these operating in-

structions?

The operating instructions do not contain any information re-

garding general or special security–related knowledge.

Therefore: Ensure that you are familiar with all of the

security–related procedures and regulations of your area (for

example, alarm procedures, plans of action, alarm

organisation, etc.).

Destruction of the UEZ display screen resulting from an exter-

nal source does not pose any direct risk for the user (for exam-

ple, explosion, implosion, dangerous gases, etc.).

Contact the Service Department if the UEZ is damaged.

When cleaning the surface of the UEZ (especially the operating

and display unit), do not use any corrosive or abrasive cleaning

materials and do not allow any liquid to leak into the interior of

the equipment.

614–30.0212.0270–01 A2 4

Explanation of Display and Operating Elements

Display/OperatingPanel

Message processing keys/

softkeys

code

stop

102

ABC

DEF

GHI

JKL 5

MNO 6

PQR

reset

STU 8

VWX 9

enter

CE 0+1

./:

inter–

nation help ? test

Display

panel

Key switch Cursor keys

Keys for character input

and fixed function keys

Individual/group

displays (LED)

Quit or cancel

function

Sounders/strobes off

Buzzer off

∑

Individual zone display

(LED)

red = alarm

Sealed switch for

“General reset”

Maintenance

Continue

System

Malfunction

Message

Internal alarm

External alarm

Alarm

Internal on

Code operation

Operation

Transmission unit

Control

Signal unit

Tableau

Switch Off

614–30.0212.0270–01 A2 5

Alarm (red) illuminates when an external or internal alarm, a pre–alarm, or a fault in the external alarm system

occurs. The alarm is stored and signalled by a buzzer.

External Alarm (red) illuminates if an alarm is reported to an external emergency position or if external

sounders and strobes are triggered.

Internal Alarm (red) illuminates if an internal alarm is triggered but not reported to an external emergency

position.

Message (red) illuminates if a message is issued. The message is stored and the buzzer is activated.

Explanation of Display and Operating Elements

Individual/groupdisplays (LED)

Maintenance

Continue

System

Malfunction

Message

Internal Alarm

External Alarm

Alarm

Internal on

Code operation

Operation

Transmission unit

Control

Signal unit

Tableau

Switch Off

Malfunction (yellow) illuminates when any kind of malfunction occurs. The appropriate malfunction message

is usually stored (not, for example, in case of a network malfunction) and the buzzer is activated. If the

type of malfunction cannot be reset by the authorised operating personnel, contact the Service Department.

System (yellow) illuminates when a system malfunction (logic malfunction) occurs.

Continue (yellow) illuminates if a triggered or malfunctioning zone or a ring or stubline malfunction has

been removed from the surveillance system to arm a detector area. After disarming the detector area, con-

tact the Service Department.

Operation (green) illuminates when the central control unit is ready for operation.

Code operation (yellow) flashes when the correct operator code has been entered.

Internal on (green) illuminates if one internal program has been switched on.

Maintenance (yellow) illuminates during a system maintenance.

Control (yellow) illuminates when a system function is triggered.

Transmission unit (red) illuminates if the transmission unit has been triggered. External emergency per-

sonnel (for example, police or surveillance personnel) have been alerted.

Switch Off (yellow) illuminates if detectors, zones, tableau items, or sounders/strobes are deactivated. The

indicator switches off when all devices are reactivated.

Tableau (yellow) illuminates if central or zone tableau items are deactivated. In this case, the tableau items

are not triggered.

Signal Unit (yellow) illuminates if a connected sounder/strobe is deactivated. The sounders/strobes do

not transmit any alarm in this case. The indicator switches off when all devices are reactivated.

Indicator illuminates

Indicator flashes

614–30.0212.0270–01 A2 6

Explanation of Display and Operating Elements

Message processing keys / softkeys with display

Message processing keys/softkeys:

Using the 4 message processing keys/softkeys, the messages/functions shown

above the keys in the display can be called up.

The text shown in the display above each key indicates the operation of each key.

Pressing the key displays further messages/functions with notes regarding

the additional operating steps.

Quiescent condition:

If the central control unit is in the quiescent condition, e.g. no messages have appeared and no functions have been called up from

the main menu, the screen saver appears in the display.

MESSAGES DETECTOR MESS.TYPE ACTIONS

Display:

In the clear text display, all existing messages, such as

intrusion, malfunction and switchoff, as well as notes re-

garding operation are displayed in the main menu.

1INTRUS. INT ZONE 0035 –16

Storage room entrance 1st floor

2INTRUS. INT ZONE 0040 –07

Offfice building south 1st floor

614–30.0212.0270–01 A2 7

Explanation of Display and Operating Elements

Fixed function keys

Switch on/off

sounders/strobes

Switch off buzzer The indicator flashes and the buzzer sounds when the following messages occur:

–Alarm

–Message

–Malfunction

–Maintenance alarm

When this key is pressed, the buzzer is deactivated and the flashing indicator is switched

off.

This key returns to the previous level or interrupts a function that has been started.

Return to the

operating level stop

code

Start/quit operation

authorisation

FThis key calls up the main menu containing the submenus and their additional functions.

Call up the

main menu

Enter the operator code. When this key is pressed, the optical/acoustic signal transmit-

ters and the buzzer are deactivated.

The flashing indicator is switched off.

This key starts code input or quits code operation.

For a detailed description, see the section Operation Authorisation, page 20.

614–30.0212.0270–01 A2 8

reset

Reset

Display individual/groups

(LEDs), check display and

buzzer

test

This key triggers the reset processes. After successful reset of all messages, the

system returns to the quiescent condition.

For a detailed explanation, see the section Resetting, pages 14 and 15.

When this key is pressed, all the LED indicators, the display of the operating panel and

the buzzer are verified for correct functioning. The indicator test finishes automatically

after 3 seconds. Then the “Software version”is displayed for 3 seconds.

enter

Confirm input This key is used to confirm the input of characters.

Call up the

message list

When this key is pressed, the display shows a list of all message types with the asso-

ciat–ed message counters.

For a detailed explanation, see the section Call up a List of all Messages, page 13.

∑

Call up help texts help? If this key is pressed, an explanatory text appears in the display. This text provides

further information regarding the menu in which the operator is currently located;

however, the text does not contain any alarm information.

Explanation of Display and Operating Elements

Fixed function keys

614–30.0212.0270–01 A2 9

Entering digits If digits have to be entered (e.g. entering the detector zone number), they can be entered

at the position indicated by the cursor .

Incorrect inputs (e.g. digits) can be deleted with this key.

Correcting inputs

ABC

JKL

MNO

DEF

Increase the

number value by 1 +1 This function has not yet been realised.

Language toggling inter–

natio–

nal

This function has not yet been realised.

Explanation of Display and Operating Elements

Fixed function keys

614–30.0212.0270–01 A2 10

Explanation of Display and Operating Elements

Cursor keys / key switch / sealed switch

Move to the next position by

pressing the appropriate key

up/down

left/right

Cursor keys

The requested position of

the cursor within the display

can be selected using the

appropriate cursor keys

(e.g. when selecting

detectors, detector zones or

functions).

Additional information is

displayed.

123456

78 9101112

Storage room entrance 1st floor

102

Key switch The assigning of operating functions to the position of the key switch can be programmed,

e.g. –internal program on/off

–code operation on/off

Sealed switch

“General Reset”If the operator cannot reset the system (e.g. after a sabotage alarm), resetting can be per–

formed without entering an operator code by actuating the sealed switch. This should only

be done after prior consultation with the Service Department. (“General Reset”is only pos-

sible if programmed).

Indice

Altri manuali Bosch Sistema di sicurezza

Bosch

Bosch Spexor Manuale utente

Bosch

Bosch ISW-BMC1-M82X Manuale utente

Bosch

Bosch Spexor Manuale utente

Bosch

Bosch FMM-100 Series Manuale utente

Bosch

Bosch Solution 16plus Manuale utente

Bosch

Bosch D222TD Manuale utente

Bosch

Bosch OD850F1 Manuale operativo e di manutenzione

Bosch

Bosch CCS 800 Ultro Manuale utente

Bosch

Bosch LBB 1968 Manuale utente

Bosch

Bosch ISW-BHB1-WX Manuale di servizio

Bosch

Bosch PRAESENSA Manuale utente

Bosch

Bosch Fire System Manuale utente

Bosch

Bosch Solution 16i Manuale utente

Bosch

Bosch FLM-420-RLE-S Manuale utente

Bosch

Bosch NBN-733 Istruzioni per il montaggio

Bosch

Bosch LTC 5136/61 Manuale utente

Bosch

Bosch CM728B Come usare

Bosch

Bosch Security Escort SE2000 Series Guida all'installazione

Bosch

Bosch LTC 8016/90 Manuale utente

Bosch

Bosch Solution 16plus Manuale utente

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 Manuale utente

Bosch

Bosch ICP-CP508 Manuale utente

Bosch

Bosch FNM-320 Series Manuale utente

Bosch

Bosch Security Systems Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente