Boss Audio Systems MGR300B Manuale utente

Thank you for purchasing this marine gauge radio!

Please read the instructions carefully, so you will know how to operate your product

properly. After you have nished reading the instructions, keep this document in a safe

place for future reference.

Table of Contents

Important ........................................................................................................................... 2

Introduction........................................................................................................................ 3

Package Contents ............................................................................................................. 3

Control Panel..................................................................................................................... 4

Mounting On Dashboard .................................................................................................. 5

Wiring ................................................................................................................................ 6

Power On/Standby ............................................................................................................7

Set Clock ........................................................................................................................... 7

Adjust/Mute Volume........................................................................................................... 7

Reset The Unit................................................................................................................... 7

Listen To Radio.................................................................................................................. 8

Play Audio Through Bluetooth........................................................................................... 9

Play Audio From USB...................................................................................................... 10

Play Audio From AUX ..................................................................................................... 11

Output Audio.................................................................................................................... 11

Change Settings.............................................................................................................. 12

Specications .................................................................................................................. 13

Troubleshooting............................................................................................................... 15

Important

Read and understand all instructions before you use your product. If you do not

follow the instructions in this manual, we are not responsible for injury or damage

resulting from improper handling. This will also void the warranty.

Important safety precautions

• Be sure to observe the following guidelines:

- Do not increase speaker volume so high that you cannot hear what is around you.

- Use caution or temporarily discontinue use in potentially hazardous situations.

• Do not make any adjustment on the product when driving or in other situations

where distractions can be hazardous. Responsible and safe driving is your primary

responsibility when operating a vehicle.

• Start volume at a low setting then gradually increase the volume until you can hear it

comfortably, without sound distortion or ear discomfort.

• In the event of smoke, strange noise or odor emitted from the product or any other

abnormal operational signs appearing on the product, disconnect the product from the

power supply. Discontinue use and contact your dealer or our technical support. Using

the product in this condition may result in permanent damage to the system.

• Servicing must only be carried out by a technician. Contact our technical support for

any service question.

Installation precautions

• WARNING: Always consult a professional installer.

• Installation must be performed by a professional. Contact our technical support for any

installation question.

• Use only installation parts provided with the product.

• Before installation, disconnect the negative terminal of the vehicle battery to prevent

damage to the product, re, and/or possible injury.

• If extending the power cable which connects to the vehicle battery, we recommend to

run the extended cable to the battery through a fuse box (not included) with at least 15A.

• The ground cable should be as short as possible. Connect the ground cable to metal

parts of your vehicle, or to the battery if your vehicle does not have a grounded chassis

frame.

If extending the ground cable to the battery, make sure to use a high quality cable with

proper gauge rating.

• Replace the old fuse with the one of the same rating.

• Observe the safety and operating instructions of the devices which are connected to

the product.

Care for your product

• Do not use abrasive cleaning materials on the display or bezel.

• This product is waterproof against splashing water. However, never submerge the

product to water or other liquids.

Care of the environment

Please inform yourself about the local separate collection system for electrical and

electronic products. Do not throw away the product with the normal household waste at the

end of its life, but hand it in at an ofcial collection point or recycling. By doing this, you help

to preserve the environment.

Introduction

The product is designed as a marine gauge radio with a built-in four channel amplier.

Through Bluetooth connection, audio can be streamed from a mobile phone to this product.

Music from an external device (e.g. a USB ash drive, mobile phone or MP3 player) can also

be played on this product via USB port or AUX input jacks.

You can also output audio from this product to an external amplier or powered speakers

via RCA outputs.

Package Contents

Marine gauge radio

Mounting kit

(1x U-bracket, 2x bolt & nut) Rubber cover

User manual &

warranty card

* The rubber cover is designed to protect the radio’s control panel against the harsh marine

environment, and additionally UV exposure, water ingress and abrasion.

Control Panel

1 /

• In USB/Bluetooth mode, select the previous/next music le; hold down to fast search .

• In radio mode, tune to a radio station; hold down to enter manual tuning mode.

2 BAND

• In USB mode, press to enter music folder or le search mode; hold down to activate

setting of repeat or shufe play mode.

• In radio mode, select a radio band (FM1/FM2/FM3/AM1/AM2); hold down to auto search

and store radio stations in FM or AM bands.

• In USB/Bluetooth mode, start, pause or resume play.

• In radio mode, select a preset radio station.

4 LCD display

• Show current status or menu options.

5 SEL

• Navigation menu options, or conrm a selection; hold down to view clock.

6 Function knob

• Press to turn the unit on; press and hold to turn the unit off.

• In power on mode, press to mute or restore volume.

• Rotate to adjust volume.

7 MODE

• Select a source: radio, Bluetooth, AUX In, USB (USB source can only be selected if a

USB ash drive is connected and has playable media).

Mounting On Dashboard

See the section “Installation precautions” on page 2.

Use only installation parts provided with the product. Using other mounting

methods may void the warranty.

Before you drill or cut any holes, investigate your vessel’s layout very carefully.

Take special care when you work near the gas tank, fuel lines, hydraulic lines

and electrical wiring.

1. Cut a mounting hole (Ф 3.13” / 79.5 mm) in the dashboard.

2. Slip the unit through the mounting hole in the dashboard.

Ø 3.13” / 79.5 mm

3. Fasten the unit to the dashboard with the supplied U-bracket and two bolts and nuts.

If needed, remove one or more break-away tabs on the U-bracket to shorten the bracket

for rm fastening to the dashboard.

Break-away

tabs

Wiring

See the section “Installation precautions” on page 2.

Disconnect the negative terminal of the vehicle battery prior to wiring.

Connect the unit to a 12V DC battery and negative ground only.

Connect speaker wires to speakers with 4 - 8 Ω .

Never ground or short the speaker wires.

Insulate all bare wires and unconnected wires with electrical tape.

To front left speaker

To front right speaker

To rear left speaker

To rear right speaker

To an audio output on

a playback device

To the power terminal

on an amplifier

Charging port, or to

a USB device for

audio media play

To radio antenna

White

White/Black

Gray

Gray/Black

Green

Green/Black

Violet

Black

Violet/Black

To an audio input on

an amplifier or signal

processor

AUX IN

Gray

Blue

RCA OUT

USB port

Black

Antenna jack

REMOTE OUT

10A fuse

Yellow (Battery wire)

Red (Ignition wire)

Ground wire

Metal part of the vehicle

To the accessory

power switch

Power On/Standby

• To switch the unit on, press briey the function knob.

When switched on, the unit switches to the last selected source and the button

backlights are illuminated.

• To switch the unit to standby, press and hold the function knob.

When switched to standby, clock is displayed and the button backlights are off.

Set Clock

1. In power on mode, press SEL repeatedly until the clock option/hour digits is selected.

2. When hour digits ash, rotate the function knob to set the hour.

3. Press the function knob (or SEL) to conrm. Minute digits ash.

4. When minutes ash, rotate the function knob to set the minute.

5. Press the function knob (or SEL) to conrm. 12 or 24 hour format prompts for selection.

6. Rotate the function knob to select 12 or 24 hour format.

7. Press the function knob (or SEL) to conrm. The clock is set.

To view clock

In power on mode, press and hold SEL to display clock. The clock is displayed briey.

Adjust/Mute Volume

• To increase or decrease volume, rotate the function knob.

• To mute volume, press briey the function knob.

Reset The Unit

If the unit fails to operate properly, reset the unit. After resetting, all the settings will be

restored to the default.

1. In power on mode, press and hold MODE for ve seconds to reset the unit.

“RESET” is displayed briey. The unit will switch to standby after resetting.

Listen To Radio

You can listen to FM and AM radio, and store the radio stations. The stored radio stations

can be retained if the unit is disconnected from the vehicle battery.

Select a radio band

1. Press MODE repeatedly to select radio. “FM” or “AM” is displayed.

2. Press BAND repeatedly to select FM1, FM2, FM3, AM1 or AM2.

Tune to a radio station

1. Switch the unit to a radio band.

2. Press briey / . The unit automatically tunes to a station with strong reception.

3. Repeat the steps above until your nd your desired station.

To tune to a weak station

1. Press and hold / to enter manual tuning mode. “MANUAL” is displayed briey.

2. Press repeatedly / to adjust radio frequency until you nd optimal reception.

- Manual tuning mode will automatically exit after three seconds of button inactivity.

Then “AUTO” is displayed briey.

Store radio stations automatically

Each radio band (FM1/FM2/FM3/AM1/AM2) can store six radio stations.

1. In radio mode, press BAND to select an FM or AM band.

2. Press and hold BAND for two seconds to search and store stations.

- All FM or AM stations will be searched and stored in FM or AM bands.

Store radio stations manually

Each radio band (FM1/FM2/FM3/AM1/AM2) can store six radio stations.

1. Select a radio band and tune to a radio station.

2. Press and hold for two seconds to activate program mode.

3. When “SAVE P1” is displayed, rotate the function knob to allocate a number (1-6) to this

radio station. Then press the function knob (or SEL) to conrm.

- If there are three seconds of button inactivity, program mode will automatically exit

without programming the radio station.

4. Repeat the steps above to store more radio stations.

Select a stored radio station

Each radio band (FM1/FM2/FM3/AM1/AM2) can store six radio stations.

1. Select a radio band.

2. Press briey to select a stored radio station. A preset number is displayed.

Play Audio Through Bluetooth

Pair with a mobile phone

Before you can stream music from your mobile device to the unit, you must pair the unit with

your mobile phone through Bluetooth.

1. Switch the unit to Bluetooth source. Press MODE repeatedly until the display shows “BT

MUSIC”. Then “UNPAIRED” is displayed. This indicates that the unit is not connected to

a mobile device and is currently in pairing mode.

2. On your mobile phone, enable Bluetooth then select “BOSS AUDIO SYSTEMS

MGR300B” to pair the unit with your mobile phone. If prompted for password, input

“0000” on your mobile phone.

- When the unit connects to your mobile phone, is displayed.

- The unit automatically connects to the last paired device each time the two are

powered on. To connect to a second device, you have to disconnect the currently

connected device then repeat the steps above to pair with a second device.

Playback control through Bluetooth

1. When the unit is connected to your mobile phone, play audio les on your mobile device.

Music will be streamed and played through the speakers which are wired to the unit.

- For best sound performance, set the volume of your mobile device to maximum, then

adjust the volume through volume control on the unit.

2. Control playback as follows.

• To pause or resume playback, press .

• To select the previous or next music le, press / .

- During playback, the display scrolls the music title of the le being played.

- If there is an incoming call during play, music play will automatically pause. Music play

will automatically resume after the call ends.

Indice

Altri manuali Boss Audio Systems Ricevitore

Boss Audio Systems

Boss Audio Systems BPS1RS Manuale utente

Boss Audio Systems

Boss Audio Systems MGV520B Manuale utente

Boss Audio Systems

Boss Audio Systems ELITE BV755B Manuale utente

Boss Audio Systems

Boss Audio Systems BV755BLC Manuale utente

Boss Audio Systems

Boss Audio Systems 609UAB Manuale utente

Boss Audio Systems

Boss Audio Systems Elite BE7ACP-SD Manuale utente

Boss Audio Systems

Boss Audio Systems bv960nv Manuale utente

Boss Audio Systems

Boss Audio Systems BV9386NV Manuale utente

Boss Audio Systems

Boss Audio Systems BVB9358RC Manuale utente

Boss Audio Systems

Boss Audio Systems BE7ACP Manuale utente

Boss Audio Systems

Boss Audio Systems 508UAB Manuale utente

Boss Audio Systems

Boss Audio Systems BV9973 Manuale utente

Boss Audio Systems

Boss Audio Systems BV9976B Manuale utente

Boss Audio Systems

Boss Audio Systems 550B Manuale utente

Boss Audio Systems

Boss Audio Systems MGV520B Manuale utente

Boss Audio Systems

Boss Audio Systems BV9695B Manuale utente

Boss Audio Systems

Boss Audio Systems elite BEHDIN98 Manuale utente

Boss Audio Systems

Boss Audio Systems BV735B Manuale utente

Boss Audio Systems

Boss Audio Systems 550B Manuale utente

Boss Audio Systems

Boss Audio Systems ELITE BE62CP Manuale utente

Boss Audio Systems

Boss Audio Systems BV9370B Manuale utente

Boss Audio Systems

Boss Audio Systems 616UAB Manuale utente

Boss Audio Systems

Boss Audio Systems ELITE BV900ACP Manuale utente

Boss Audio Systems

Boss Audio Systems BV9356 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente