Boult Audio TRUEBUDS Manuale utente
BOULT AUDIO TRUEBUDS
User Manual
For better sound quality experience, suggest use
IOS 8.0/ Android 4.3 or above operation system.
Pairing
Please refer to the safety precautions mentioned on the last page
of this manual before operating this device.
When using it for the rst time (or not using it for a long time),
please make sure to charge the earbuds and charging box before
use.
ŸOpen the charging case and take out the earbuds, the
earbuds will turn on automatically and enter into the
pairing mode.
ŸThe phone turns on Bluetooth, searches for the Bluetooth
name “Boult Audio TrueBuds” to connect.
Tips:
1. When the red & blue lights of the master earbud ash
alternatively, and the salve earbud indicator ash blue
slowly, the earbuds are ready to pair with your Bluetooth
device.
2. When the earbuds indicator ash blue slowly, they have
connected with cellphone.
3. While using earbuds again, take the L/R earphones out of
the charging case and the L/R earbuds will power on and
connect to each other automatically, also the master
earbud will connect o the bluetooth device automatically,
(The last connected Bluetooth device.)
4. Both earbuds can be used separately.
Product Picture
Microphone
Indicator light
Touch pad control
Ear cap
Charging contacting
Type-C Charging port
Charging contacting
Indicator light
Functional operation
Play /Pause Click
Double-Click
Double-Clickk
Press 3S(right earbuds)
Press 3S(left earbud)
Click
Press 2S
Press 2S
Open the Case Cover/Press 3S
Close the case cover/
No Connected in 10 Minutes
Previous Song
Next Song
Volume +
Volume -
Answer Call/Hang up
Reject Call
Voice Assistant
Power On
Power Off
Warm Tips:
1. When adjusting the earbud volume, please press the
operation area of the earbud without releasing until it
reaches the desired volume.
2. Please use the earbud in reasonable volume and time,
othewise it will damage your hearing if you listen the music
for long time in high volume.
3. In the Mono mode, earbuds cannot adjust the volume. You
can adjusted it by phone.
Charging
Charging for the charging case
Ÿ When charging the indicator light ashes white light.
Ÿ When fully charged, the 4 white indicator lights keep
lighting, please disconnect charging devices from the
charging case.
Charging for earbuds
Ÿ When charging, the indicator light ashes red light.
Ÿ When fully charged, the indicator goes out, the charging
case will power off automatically.
How to reset
If the earbuds cannot be connected to the mobile device, or the
left and right earbud cannot be connected normally, please use
the following reset method to solve the problem.
Open the charging case and take out the earbuds, when the
earbuds ash blue lights, long press the left and right earbud
touch control area for 5 seconds at the same time. The earbuds
indicators ash red and blue light alternately and then release.
They will enter into paring mode automatically.
Note: Please long press when the earbuds ashes blue light, but
loog press is invalid when ashes red and blue light.
red & blue light
Long press for 5s Pairing automatically Search the Bluetooth
and connect
Specication
Bluetooth version: V5.0
Support prole: A2DP/AVRCP/HFP/HSP
Transmission distance: 10M
Frequency range: 2402MHz-2480MHz
Driver: 6MM*2 Hi-Fi Speaker
Voltage: 3.7V
Standby time: About 80H
Talking time: About 5H
Playing time: About 5H
Earbud Battery 45MAH
Earbud charging time: About 1.5H
Support system: IOS/Android/Windows
Certication: CE/FCC/ROHS
Attention
1. Do not remove or ret earbuds for any reason, otherwise it
will lead to headset damaged and burn. These are not
covered by warranty.
2. Do not touch the earbuds in corrosive liquid, otherwise it
will cause serious damage. the manufacturer will not
guarantee the damage caused under this situation.
3. Do not put the equipment under too high or too low
temperature (Below 0 C or above 45 C).
4. Please avoid approaching the eyes of children or animals
when using equipment lights.
5. Do not use equipment in the thunderstorm weather.
Thunderstorms may cause abnormal equipment operation
and increase the risk of electric shock.
6. Due to the limit of the environment & connection distance
for the bluetooth products, do not use our earbuds in large
electromagnetic interference and radiation environment.
7. While driving, try to avoid using earbud to listen to music,
make or receive calls, so as not to distract from danger.
Warning!
This product contains a built-in lithium battery. Please do not
expose this product to strong sunlight, roasting or throwing it into
the re, as they may explode.
0 0
Indice
Altri manuali Boult Audio Cuffie
Boult Audio
Boult Audio Airbass Z1 Manuale utente
Boult Audio
Boult Audio AIRBASS ZX1 Manuale utente
Boult Audio
Boult Audio PROBASS POWERBUDS Manuale utente
Boult Audio
Boult Audio QCHARGE Manuale utente
Boult Audio
Boult Audio PROBASS X1-WL Manuale utente
Boult Audio
Boult Audio PROBASS POWERBUDS Manuale utente
Boult Audio
Boult Audio PROBASS PROPODS X Manuale utente
Boult Audio
Boult Audio ENCORE Manuale utente
Boult Audio
Boult Audio PROBASS TRUFIVE PRO Manuale utente
Boult Audio
Boult Audio PROBASS MUSEBUDS Manuale utente
Boult Audio
Boult Audio Probass Curve Manuale utente
Boult Audio
Boult Audio Probass Buster Manuale utente
Boult Audio
Boult Audio Boult Audio ZigBuds Manuale utente
Boult Audio
Boult Audio PROBASS PROPODS Manuale utente
Boult Audio
Boult Audio ZCHARGE Manuale utente
Boult Audio
Boult Audio SOULPODS Manuale utente
Boult Audio
Boult Audio Rito Pro Manuale utente
Boult Audio
Boult Audio XPods Manuale utente
Boult Audio
Boult Audio ANCHOR Manuale utente
Boult Audio
Boult Audio PROBASS GEARPODS Manuale utente
