BOULT Y1 Pro Manuale utente
Product specification
How to use your Y1 Pro ?
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in
the upper part of the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the
earbud marked with R is worn on the right ear.
Play/Pause
Tap the MFB once
Next Track
Double Tap the right MFB
Previous Track
Double Tap the left MFB
Volume +
Triple Tap the right MFB
Volume -
Triple Tap the left MFB
Textured
Case Indicator
Light
Indicator Light Multifunctional
Touch
Y1 Pro
Product Name – TWS Bluetooth Headset
Model – Boult Audio AirBass
Bluetooth Range - ~10m/33ft (without any obstacles)
Earbuds Charging Time – 60 mins
Frequency Range - 20Hz - 20KHz
Technology - HFP/HSP/A2Dp/AVRCP
Input - DC5V = 1A
Voice Assistant
Long Press the MFB for 2s
Answer the Call
Tap the MFB once
End Call/Reject
Double Tap the MFB
Game/Music Mode
Tap the MFB four times
Charging Case
Earbuds
Type C Charging Cable
Manual
Extra pair of ear tips
Warranty Card
Power ON/OFF:
Power ON:
Auto: Open the charging case and take out the earbuds to
Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3
seconds.
Power OFF
Auto: Place both the earbuds in the charging case, close the lid.
Manually: Hold MFB for 5 seconds.
Bluetooth Lost:
Turn off mobile phone's Bluetooth, earbuds will enter pairing
mode and can pair with other devices.
If the connection range is exceeded, the earbuds will enter
the back connection mode. No connection within 5 minutes,
the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
Delete all “Boult Audio Airbass” Bluetooth records on the
phone and turn off Bluetooth.
Put earbuds in the charging case and then take out to
pairing modes, tap L&R 5 times simultaneously, hear “DU”
prompt voice to clear all pairing.
Put earbuds back into the charging case.
1.
2.
3.
Voice Prompts
You will hear ‘power on’ when the headset powers on.
You will hear ‘power off’ when the headset powers off.
You will hear ‘connected’ when the headset is paired.
You will hear ‘low battery’ when the headset is in low power status
You will hear ‘gaming mode’ when the headset is in gaming mode.
High Fidelity
Acoustics
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal
channels to be applicable for warranty.
Damaging the product intentionally/unintentionally,
or due to natural disasters, etc. is not covered in the warranty.
Touch
Control
.
.
.
.
.
Open the charging case, and take out the earbuds, the earbuds LEDs
will start flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for
pairing name “Boult Audio Airbass” and click on it.
Single Mode: When on dual mode, put one earbud into the charging
case. Only take one earbud out of the charging case and connect it.
Altri manuali BOULT Cuffie
