Broadata Link Bridge LBS-41H2 Manuale utente
LBS-41H2
BCI reserves the right to make changes to the products described herein without
prior notice or consent. No liability is assumed as a result of their use or
application. All rights reserved.
©2017 Broadata Communications, Inc.
Link Bridge 4×1 HDMI 2.0 Switcher
TM
SAFETY INSTRUCTIONS AND
COMPLIANCE DECLARATIONS
PLEASE OBSERVE THE FOLLOWING SAFETY
PRECAUTIONS
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes,
etc. Use of surge protection systems is highly recommended in order
to protect and extend the life of your equipment.
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION............................................................................ 5
2.0 OPERATION CONTROLS AND FUNCTIONS................................................ 6
2.1 FRONT PANEL............................................................................................... 6
2.2 REAR PANEL ................................................................................................. 7
3.0 REMOTE CONTROL...................................................................................... 8
4.0 RS-232 PIN ASSIGNMENT ........................................................................... 8
4.1 RS-232 AND TELNET COMMANDS .............................................................. 9
4.2TELNETCONTROL..........................................................................................12
4.3 GUI CONTROL ..............................................................................................13
4.4 WEBGUI CONTROL PAGE............................................................................14
5.0 SPECIFICATIONS .........................................................................................18
6.0 SERVICE PROCEDURE.................................................................................19
6.1 REPLACEMENT POLICY .............................................................................19
6.2 RETURN & REPAIR SERVICE.........................................................................19
7.0LIMITEDWARRANTY.....................................................................................20
8.0 APPENDIX - VIDEO SPECIFICATIONS ........................................................ 21
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
FEATURES
• An 4x1 (LBS-41H2) HDMI 2.0 switcher with HDCP 2.2 compliance
• Supports video resolutions up to 3840x2160@60Hz &
4096x2160@60Hz with 4:4:4 YUV and HDR format
• Supports pass-through of audio formats including LPCM 2.0~7.1,
Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos
and DTS-HD Master Audio
• Supports congurable EDID management via pre-dened internal
EDIDs and user-dened EDID selections
• Multiple control interfaces including RS-232, Telnet, WebGUI and IR
remote
1.0 PRODUCT DESCRIPTION
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
1.IR WINDOW: Accepts IR signals from the included IR remote for
control of this unit only.
2. POWER: Press this button to power on the unit or place it into
standby mode.
Note: Ethernet and RS-232 remain active while the unit is in stand
by mode.
3. POWER LED: The LED will illuminate RED to indicate the unit is
receiving power but is in stand-by mode. It will illuminate GREEN
to indicate that the unit has been turned on.
4. SYNC LED: This LED will illuminate GREEN when a stable
connection with an output device is detected.
5. INPUT: Press this button to sequentially switch through the 4
available inputs.
6. INPUT LED 1~4: These LEDs will illuminate GREEN to indicate
which of the 4 sources are currently selected.
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
HDCP2.2
+
POWER SYNC
UHD 4 TO 1 SWITCHE R
INPUT 123 4
1 2 53 4 6
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
1. HDMI IN 1~4: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI source equipment may be
connected by using an HDMI to DVI adapter.
2. HDMI OUT: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output. DVI display equipment may be connected
by using an HDMI to DVI adapter.
3. SERVICE: This slot (USB 2.0) is reserved for rmware update use
only.
4. CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
5 RS-232: Connect directly to your PC/laptop to send RS-232
commands to control the unit.
6. IR IN: Connect to the provided IR Extender to extend the IR control
range of the unit. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
7. DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2.2 Rear Panel
1234
HDMI IN HDMI OUT SER VICE CONTROL RS-232 IR IN DC 5V
21 3 4 5 6 7
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
1. POWER: Press this button to power on the unit or
place it into stand-by mode.
2. INPUT 1~4: Press 1 through 4 to select the input
source.
Baud Rates: 115200bps
Data Bits: 8
Parity Bits: None
Stop Bit: 1
Flow Control: None
4.0 RS-232 PIN ASSIGNMENT
3.0 REMOTE CONTROL
3.1 IR Cable Pin Assignments
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
POWER
INPUT
1
2
1
3
2
4
4.1 RS-232 AND TELNET COMMANDS
COMMAND DESCRIPTION AND PARAMETERS
HELP Displays all available commands.
?Displays all available commands.
P0 Turn unit’s power off. (Stand-by mode)
P1 Turn unit’s power on.
INNAME N1 N2 Set the name of input N1 to N2.
N1 = 1~4 [Input number]
N2 = {name} [8 characters max]
INNAME N1 Show the input name of N1.
N1 = 1~4 [Input number]
INNAME Show the names of all inputs.
OUTNAME N1 Set the output name to N1.
N1 = {name} [8 characters max]
OUTNAME Show the current output name.
OUT N1 Set the input to be routed to the output.
N1 = 1~4 [Input number]
OUT Show the current input routing.
SOURCEDET Show all source information.
SINKINFO Show all sink information.
HDCPIN N1 N2 Set the HDCP mode for input N1.
N1 = 1~4 [Input number]
Available values for N2:
0 [Standard]
1 [Apple Mode]
HDCPIN N1 Show the HDCP settings for input N1.
N1 = 1~4 [Input number]
HDCPIN Show all current HDCP input settings.
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
COMMAND DESCRIPTION AND PARAMETERS
EDIDMODE N1 Set the EDID mode.
Available values for N1:
0 [Appoint]
1 [All]
EDIDMODE Show the current EDID mode setting.
EDIDALL N1 Set the EDID to use in “All” mode.
Available values for N1:
0 [SINK]
1 [720P]
2 [1080P]
3 [4K_3G]
4 [4K_Y420]
5 [4K_6G]
EDIDALL Show the current EDID selection for “All”
mode.
EDIDIN N1 N2 Set the EDID to use on input N1 in “Appoint”
mode.
N1 = 1~4 [Input number]
Available values for N2:
0 [SINK]
1 [720P]
2 [1080P]
3 [4K_3G]
4 [4K_Y420]
5 [4K_6G]
EDIDIN N1 Show the current EDID selection for input N1
in “Appoint” mode.
EDIDIN Show the current EDID selections for all inputs
in “Appoint” mode.
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
Indice
Altri manuali Broadata Interruttore
