Brother HL-DCP-9055CDN Manuale utente

Version B

ARL/ASA/NZ/SAF/GLF

Not all models are available in all countries.

Please read this booklet before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation.

Symbols and

conventions used in

the documentation A

The following symbols and conventions are

used throughout the documentation.

Follow all warnings and instructions marked

on the product.

Note

The illustrations in this guide show the

HL-4150CDN and MFC-9460CDN.

Safety and Legal A

(HL-4140CN / 4150CDN / 4570CDW(T) / DCP-9055CDN / 9270CDN / MFC-9460CDN / 9465CDN / 9970CDW)

Bold Bold typeface identifies

specific buttons on the

product’s control panel, on the

computer screen.

Italics Italicized typeface

emphasizes an important

point or refers you to a related

topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the product.

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

WARNING

CAUTION

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

Notes tell you how you should

respond to a situation that may arise

or give tips about how the operation

works with other features.

Electrical Hazard icons alert you to

possible electrical shock.

Improper Setup icons alert you to

devices and operations that are not

compatible with the product.

Hot Surface icons warn you not to

touch product parts that are hot.

IMPORTANT

Compilation and Publication A

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choosing a location A

Put your product on a flat, level, stable surface that is free of vibration and shocks, such as a desk.

Put the product near a telephone socket and a standard grounded electrical socket. Choose a

location where the temperature remains between 10°C and 32.5°C and the humidity is between

20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, salty or corrosive

gasses, moisture or dust.

DO NOT place the product near heaters, air conditioners, desk fan, refrigerators, water or

chemicals.

CAUTION

Avoid placing your product in a high-traffic area.

DO NOT put the product where the ventilation holes of the product are blocked. Keep a gap of

roughly 100 mm between the ventilation holes and the wall.

DO NOT connect your product to electrical sockets controlled by wall switches or automatic

timers, or to the same circuit as large appliances that might disrupt the power supply.

Disruption of power can delete information from the product’s memory.

Avoid interference sources, such as other cordless telephone systems or speakers.

Make sure cables leading to the product do not constitute a trip hazard.

DO NOT eat the Silica Pack. Discard immediately.

To use the product safely A

WARNING

There are high voltage electrodes inside the product. Before you clean the inside of the product,

make sure you have unplugged the telephone line cord first (MFC only) and then the power cord

from the electrical socket. Doing this will prevent an electrical shock.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

This product must be installed near an electrical socket that is easily accessible. In case of an

emergency, you must unplug the power cord from the electrical socket to shut off the power

completely.

Plastic bags are used in the packing of your product and drum unit. Plastic bags are not toys.

To avoid the danger of suffocation, keep these bags away from babies and children and dispose

of them properly.

DO NOT use flammable substances near the product. DO NOT use any type of spray to clean

the inside or outside of the product. Doing this may cause a fire or electrical shock. See Routine

Maintenance in the User's Guide/Basic User's Guide for how to clean the product.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Be careful not to inhale toner.

• This product is heavy and weighs more than 21.0 kg for Printer, and more than 26.5 kg for

MFC/DCP. To prevent injuries when moving or lifting this product, make sure to use at least

two people. Be careful not to pinch your fingers when you set the product back down.

• If you use a Lower Tray, carry it separately from your product.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged at the wall socket.

Never install telephone wiring during a lightning storm. Never install a telephone wall socket in

a wet location.

(MFC only)

When using your telephone equipment, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and injury to people, including the following:

1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink

or washing product, in a wet basement or near a swimming pool.

2 Avoid using this product during an electrical storm. There may be a remote risk of electric

shock from lightning.

3 DO NOT use this product to report a gas leak in the vicinity of the leak.

4 We DO NOT advise using an extension lead.

5 Never install telephone wiring during a lightning storm. Never install a telephone wall socket

in a wet location.

6 If any cables become damaged, disconnect your product, and contact your Brother dealer.

7 DO NOT place any objects on the product, or obstruct the air vents.

8 This product should be connected to an adjacent grounded AC power source within the

range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If

you are not sure, contact a qualified electrician.

SAVE THESE INSTRUCTIONS

DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high

speed.

Languages on the label may vary depending on your country.

CAUTION

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait for the product to cool down before you touch the internal parts of the product.

(MFC-9460CDN / MFC-9465CDN / DCP-9055CDN only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations.

(MFC and DCP only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

IMPORTANT

DO NOT remove or damage any of the caution or warning labels inside the product.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Brother Stampante

Brother

Brother DCP-9040CN Manuale utente

Brother

Brother TD-4520DN Manuale utente

Brother

Brother 1470N - HL B/W Laser Printer Manuale utente

Brother

Brother ep44 Manuale utente

Brother

Brother MFC-9330CDW Manuale utente

Brother

Brother DCP-J1100DW Manuale utente

Brother

Brother HL-3260N Manuale utente

Brother

Brother MFC 1780 - B/W Inkjet Printer Scheda tecnica

Brother

Brother GTX600SB Guida utente

Brother

Brother HL-4570CDW Manuale utente

Brother

Brother ReChargX RX417XX Manuale utente

Brother

Brother PS 9000 - Print Server - USB Manuale utente

Brother

Brother HL-1470N Manuale utente

Brother

Brother HL-2070N Manuale utente

Brother

Brother HL-5130 Manuale utente

Brother

Brother GTX Series Manuale utente

Brother

Brother DCP-8110DN Manuale utente

Brother

Brother hl 1650 - B/W Laser Printer Manuale utente

Brother

Brother DCP-9020CDN Manuale utente

Brother

Brother DCP-J562DW Manuale tecnico

Brother

Brother RJ-4230B Manuale utente

Brother

Brother HL-1650 Manuale utente

Brother

Brother HL-1060 Series Manuale utente

Brother

Brother GT-341 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente