BSER HS-7321 Manuale utente
HS-7321
Intel® Core™ 2 Duo/Core™ Duo/
Core™ Solo/Celeron® M processor
PICMG1.3 Half-size SBC
•CompactFlash•Mini PCI•8-bit DIO
•DVI-I/CRT/LVDS•Dual GB LAN•Audio•
•SATA•ATA/33/66/100•RS-232/422/485•
•4 COM•USB2.0•WDT•
•Single +12V•H/W Monitor•
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.6, April 29, 2010
Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 2
1.3 Board Dimensions................................................................. 4
Chapter 2 Unpacking ..................................................5
2.1 Opening the Delivery Package............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3 Hardware Installation ..............................7
3.1 Before Installation ................................................................. 7
3.2 Board Layout ......................................................................... 8
3.3 Jumper List ............................................................................ 9
3.4 Connector List ....................................................................... 9
3.5 Configuring the CPU ........................................................... 10
3.6 System Memory ................................................................... 10
3.7 VGA Controller .................................................................... 10
3.8 PCI E-IDE Drive Connector................................................. 13
3.9 Serial ATA Connector ......................................................... 14
3.10 Floppy Disk Drive Connector ............................................. 15
3.11 Serial Port Connectors ....................................................... 16
3.12 Ethernet Connector............................................................. 17
3.13 USB Connector .................................................................... 18
3.14 CMOS Data Clear................................................................. 18
3.15 Power and Fan Connectors................................................ 19
3.16 Keyboard/Mouse Connectors ............................................ 20
3.17 System Front Panel Control ............................................... 20
3.18 Watchdog Timer .................................................................. 21
3.19 Audio Connectors ............................................................... 22
3.20 CompactFlashSocekt ...................................................... 23
3.21 Expansion Interface ............................................................ 24
3.22 8-bit I/O Function................................................................. 24
Chapter 4 AMI BIOS Setup.....................................29
4.1 Starting Setup...................................................................... 29
4.2 Using Setup ......................................................................... 30
4.3 Main Menu............................................................................ 31
4.4 Advanced Settings .............................................................. 32
4.5 Advanced PCI/PnP Settings............................................... 39
4.6 Boot Settings ....................................................................... 40
4.7 Security Settings ................................................................. 41
4.8 Advanced Chipset Settings................................................ 42
4.9 Exit Options ......................................................................... 44
Chapter 5 Software Utilities.....................................45
5.1 Chipset Driver Installation.................................................. 45
5.2 VGA Driver Installation ....................................................... 48
5.3 Audio Driver Installation..................................................... 51
5.4 LAN Driver Installation........................................................ 54
Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class: Information Technology Equipment
Product Model Series: HS-7321
This Product Complies With: EN55022: Class A for Radiated emissions
EN50082-2: Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the product to ensure
harmlessly discharge any static electricity through the strap.
Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.
1
Chapter 1
General Description
The HS-7321 is an Intel® 945GME GMCH chipset-based board
designed. The HS-7321 is an ideal all-in-one PICMG1.3 Half-size SBC.
Additional features include an enhanced I/O with CF, DVI-I/CRT/LVDS,
dual GB LAN, audio, SATA, COM, and USB2.0 interfaces.
Designed with the Intel® 945GME GMCH, the board supports Socket
M for Intel® Core™ 2 Duo/Core™ Duo/Core™ Solo/Celeron® M
processor 1.66~2.33GHz.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows
the HS-7321 to support data transfers of 33, 66 or 100MB/sec. to one
IDE drive connection. The Intel® ICH7-M serial ATA controller with two
ports supporting transfer rates up to 150MB/sec.
Onboard Intel® 945GME GMCH for CRT display with DVMT or option
CHRONTEL 7307 for DVI-I display supporting up to 2048 x 1536. It
also supports 18-bit single/dual channel LVDS interface.
System memory is also sufficient with the one SO-DDRII socket that
can support up to 1GB.
Additional onboard connectors include an advanced USB2.0 port
providing faster data transmission. And two external RJ-45 connectors
for 10/100/1000 Based Ethernet uses.
2
To ensure the reliability in an unmanned or standalone system, the
watchdog timer (WDT) onboard HS-7321 is designed with software
that does not need the arithmetical functions of a real-time clock chip. If
any program causes unexpected halts to the system, the onboard WDT
will automatically reset the CPU or generate an interrupt to resolve
such condition.
1.1 Major Features
The HS-7321 comes with the following features:
¾Socket M for Intel® Core™ 2 Duo/Core™ Duo/Core™ Solo/Celeron® M
processor 1.66~2.33GHz
¾Supports 667/533MHz FSB
¾1 x SO-DIMM up to 1GB DDR2 SDRAM
¾Intel® 945GME/ICH7-M system chipset
¾Intel® 945GME integrated VGA for CRT & LVDS
¾2 x Intel® 10/100/1000 Mbps ethernet
¾AC’97 audio codec
¾Supports CF, mini PCI, 2 x SATA, 4 x COM, 3 x USB2.0
¾Supports 18-bit LVDS, 8-bit I/O, Single +12V power in, H/W Monitor
function
1.2 Specifications
zSystem
CPU:
Socket M for Intel® Core™ 2 Duo/Core™ Duo/Core™ Solo/Celeron® M
processor 1.66~2.33GHz
Core™ 2 Duo: T5500, T5600, T7200, T7400, T7600
Core™ Duo: T2300, T2400, T2500, T2600, T2700
Celeron® M: 410, 420, 430, 440, 450
Bus Interface:
PICMG1.3 Half-size
Front Side Bus:
Supports 667/533MHz FSB (PCB VER:0.5 or later version)
BIOS:
AMI PnP Flash BIOS
System Chipset:
Intel® 945GME/ICH7-M
I/O Chipset:
Winbond W83627EHG
System Memory:
1 x 200-pin SO-DIMM socket DDR2 667MHz up to 1GB
Storage:
1 x Type II CF socket
3
Watchdog Timer:
Software programmable time-out intervals from 1~255 sec. or 1~255
min.
H/W Status Monitor:
Monitoring temperatures, voltages, and cooling fan status
Expansion Interface:
1 x Type III mini PCI socket
Power In:
Single +12V power in
Operating Temperature:
0~60 degrees C
Operating Humidity
0~95%, non-condensing
Size(L x W):
167.6 x 126.4 mm
zI/O Interface
MIO:
3 x RS-232
1 x RS-232/422/485
3 x USB2.0 (2 x internal, 1 x external)
1 x IDE
1 x FDD
2 x SATA
1 x 6-pin header for PS/2 KB/MS
DI/O:
8-bit input/output by parallel port
zDisplay
Chipset:
Intel® 945GME integrated Intel® GMA950
LVDS:
18-bit single/dual-channel
DVI Chipset:
Chrontel 7307 (option)
Resolution:
CRT Mode: 2048 x 1536
zAudio
Chipset:
RealTek ALC202A
Audio Interface (w/pin header):
MIC In, Line Out
4
zEthernet
Chipset:
Dual Intel® 82573L 10/100/1000 Mbps LAN
Ethernet Interface:
2 x RS-45
1.3 Board Dimensions
Indice
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
