BT DECOR 1100 Manuale utente

Please note that you require 4 x AA batteries for

the 1571 feature to work. These are not included.

BT Decor 1100

User Guide

Welcome…

to your BT Decor 1100

Corded Telephone

* Requires subscription to BT’s Call Minder or 1571 Service and 4 x AA batteries

must be fitted (not included) for this feature to work.

•Three one-touch memory buttons for easy dialling of your

most important numbers.

•Quickdial memory to store 10 more useful contact numbers.

•Secrecy feature lets you talk to someone else close by

without your caller hearing you.

•Last number redial at the touch of a button.

•The BT Answer (1571) button flashes to let you know when

you have received new voice mail messages on your

network’s answering service*

This User Guide provides you with all the information you

need to get the most from your phone. Before you make

your first call you will need to set up your phone. Follow

the simple instructions in ‘Getting Started’, on the next

few pages. If you need any assistance with your phone,

please visit www.bt.com/producthelp

Hearing aid?

The BT Decor 1100 is fitted with an inductive coupler so it

is compatible with hearing aids.

Got everything?

BTDecor 1100 telephone

Base plinth

Telephone line cord

Wall mounting screws

User Guide

Getting started

Location

You need to place your BT Decor 1100 within 3 metres of a

telephone socket so that the cable will reach.

Your BT Decor 1100 can be wall mounted, see Wall mounting

your phone, on page 11.

Insert 4 x AA batteries

You will need to insert 4 x AA Alkaline recommended

1.5V batteries (not supplied) for the 1571 feature to work.

•Please note

You will still be able to make and receive calls without the batteries fitted.

•Low battery indication

If the batteries are low, the 1571 button will flash to warn you that they need

replacing.

Turn the phone over, and remove the battery compartment

cover by pressing in on the plastic clip and lifting the cover off.

Insert the batteries making sure to follow the polarity markings

shown inside the battery compartment and replace the cover.

•Warning

When you change the batteries please ensure the phone is disconnected from

the telephone line.

Mode

Ringer

Ringer Vol.

Off

If you need any assistance with your product, please visit www.bt.com/producthelp

Connecting the handset to the base

Turn the phone over and connect the curly handset cord into

the socket marked with the symbol. Turn the phone back

over and position the handset on the receiver.

Removing the base plinth (optional)

Your BT Decor 1100 will come with the base plinth already

attached. If you want to use your BTDecor 1100 on a flat

surface such as a table or desk then we advise you to leave the

plinth attached.

If you prefer to wall-mount your BT Decor 1100, please refer to the instructions

shown on page 11.

If you want to remove the base plinth, turn the plinth lock

switch on the underside of the phone to the ‘unlock’ position

and unclip.

Connecting to the telephone line

Connect the telephone line cord to the socket marked on

the back of the base and plug the other end into the telephone

wall socket.

Your BT Decor 1100 is now ready for use.

Removing the batteries

If you ever need to remove the batteries, firstly ensure that the

phone is disconnected from the phone line and then turn the

phone over and remove the battery compartment cover by

pressing in on the plastic clip and lifting the cover off. Insert

your fingernail under the end of the batteries to pull them out.

3 Getting started

If you need any assistance with your product, please visit www.bt.com/producthelp

Getting to know your phone

* Touse the 1571 feature, you must subscribe to your network’s answering service. Batteries must be installed to be able to use the 1571 button.

Handset hook

Rotates to hold the handset

in place when wall mounted.

Store button (under One-

Touch Memory Card)

Use to store one-touch

memory and quickdial

numbers.

Redial button

Redials the last number

called.

Mode

Ringer

Ringer Vol.

Off

Mode switch

Use to change

the dial mode.

Ringer Switch

Use to change

the ringer

melody.

Ringer Volume

Switch

Use to set the

ringer volume.

Underneath your phone:

Corded telephone

If you need any assistance with your product, please visit www.bt.com/producthelp

2 3

TDecor 1100

tteries must be installed to be able to use the 1571 button.

Call light

Red light flashes to indicate

an incoming call.

3One-Touch Memory

buttons

Use to store and

automatically dial up to

three numbers at the touch

of one button.

Memory button

Use to dial up to 10 quickdial

numbers.

R(Recall) button

Press and hold to enter

apause when storing

anumber in the memory

1571/Messages button*

Press to automatically dial

1571 to easily access BT

Answer 1571 or Call Minder.

The green light flashes when

you have new messages

waiting on your network’s

answering service.

Secrecy button

Lets you talk to someone in

the same room without the

person you are calling

hearing you.

Red light illuminates when

secrecy is on.

Red light flashes when you

are storing one-touch or

quickdial memory numbers.

If you need any assistance with your product, please visit www.bt.com/producthelp

Making and ending calls

Make a call

1. Lift the handset and wait for the dial tone.

2. Dial the telephone number.

End a call

Replace the handset.

Receive a call

When you receive a call, the telephone rings and the red call

light flashes. Simply pick up the handset to answer the call.

Redial the last number called

1. Lift the handset.

2. Press the button. The last number called is dialled.

Aredial number can be no longer than 32 digits.

Secrecy

When on a call you can use the secrecy feature to talk to

someone in the same room, without your caller hearing.

Toswitch secrecy on and off

1. During a call press and release the button.

The secrecy button will illuminate red to show that secrecy

is on.

Your caller will be put on hold. You can now talk to someone in

the room without your caller hearing you.

2. Press and release the button again to return to your

caller. The red secrecy light will go out.

Store

Using your phone

If you need any assistance with your product, please visit www.bt.com/producthelp

7 Using your phone

Adjust the ringer volume

There are 3 volume settings to choose from: HIGH, LOW or

OFF.

The default setting is High (Hi).

If the ringer is set to OFF, the call light will still flash to indicate

when someone is calling you.

Turn the phone over and move the Ringer Vol. Switch to the

volume you want: Hi, Lo or Off.

Set the ringer melody

There are 3 ringer melodies to choose from.

The default melody is R1.

Turn the phone over and move the Ringer Switch to the

position you want: R1, R2 or R3.

Set the dial mode

There are 3 dial mode settings. Tone/Timed break (TB),

Tone/Earth (TE) and Pulse/Earth (P). The default setting is

Tone/Timed break (TB).

You should only have to change this setting if connected to a switchboard that

requires Pulse dialling.

Turn the phone over and move the Mode Switch to the position

you want: P, TE or TB.

Mode

Ringer

Ringer Vol.

Off

Ringer

Ringer Vol.

Off

Mode

Ringer

Ringer Vol.

Off

If you need any assistance with your product, please visit www.bt.com/producthelp

8 Using your phone

One-Touch memories

You can store your three most frequently used telephone

numbers in the One-Touch memories (1, 2 or 3).

The one-touch memory card (located around the one-touch

buttons) can be used to keep a record of your one-touch

memory numbers/contact names. Lift the plastic plate up and

you can write on the card.

To store a One-Touch number

The button is located underneath the one-touch

memory card. You will need to remove the card and

plastic plate before you can access it.

1. Lift the handset.

2. Press the button. The red secrecy light will flash.

3. Press the memory location number (1, 2 or 3), in which you

want to store the number.

4. Enter the telephone number you want to store including the

area code.

Please note that the number can be no longer than 32 digits.

5. Press the button. You will hear a confirmation tone.

6. Replace the handset.

Todial a One-Touch number

1. Lift the handset and wait for the dial tone.

2. Press the memory location number in which the number you

want is stored (1, 2 or 3). The number is dialled automatically.

Toinsert a pause in a memory number

Sometimes you may need to enter a pause when storing a

number, e.g. with an overseas number you may need to enter a

pause after storing the international code.

Press and hold (for approx 1.5 seconds) the button in the

place where you want to enter a pause.

When you dial the number your BT Decor 1100 will

automatically insert the pause where you stored it.

Store

BTDecor 1100

Decor

If you need any assistance with your product, please visit www.bt.com/producthelp

9 Using your phone

Quickdial memories

You can store a further 10 telephone numbers in the Quickdial

memories.

There is a quickdial memory card located under the handset on

your BT Decor 1100 which can be used to keep a record of your

quickdial memory numbers / contact names. Lift the plastic

plate up and you can write on the label.

Please note that quickdial numbers can be a maximum of 32 digits long.

To store a number in the Quickdial memory

1. Lift the handset.

2. Press the button. The red secrecy light will flash.

The Store button is located underneath the one-touch memory card. You will

need to remove the card and plastic plate before you can access it.

3. Using the keypad, enter a memory location number between 0

and 9 in which you want to store the number.

4. Enter the telephone number you want to store including the

area code.

5. Press the button. You will hear a confirmation tone.

6. Replace the handset.

Todial a Quickdial number

1. Lift the handset and wait for the dial tone.

2. Press the button.

3. Using the keypad, enter the memory location number between

0and 9 in which the number is stored. The number is dialled

automatically.

Todelete stored numbers

1. Lift the handset.

2. Press the button. The red secrecy light will flash.

3. Press the memory location number (0-9) or the one-touch

memory button (1, 2 or 3) in which you have stored the number

you wish to delete.

4. Press the button. You will hear a confirmation tone.

Store

If you need any assistance with your product, please visit www.bt.com/producthelp

Indice

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente

Ericsson

Ericsson Dialog 3213 Manuale utente