BT Decor 2200 Manuale utente
User Guide
BT Decor 2200
Think before
you print!
This new interactive user guide lets you
navigate easily through the pages and allows
you to be directed straight to any websites
or email addresses that are referenced.
Simply hover the cursor over the page number,
website or email reference and click when the
hand icon changes to the icon.
2
If you experience any problems, please visit www.bt.com/producthelp
Got everything?
• BT Decor 2200 telephone
with handset attached
• Telephone line cord
(pre-installed)
• 4 x AA batteries
(pre-installed)
• User Guide
This User Guide provides you with all the
information you need to get the most
from your phone.
Before you make your first call you will
need to set up your phone. Follow the
simple instructions in ‘Getting started’,
on the next few pages.
Need help?
If you need any assistance with your phone or wish to
view answers to Frequently Asked Questions, please visit
www.bt.com/producthelp
IMPORTANT
Only use the telephone line cord supplied.
Hearing aid?
The BT Decor 2200 is fitted with an inductive coupler so it is
compatible with hearings aids.
3
If you experience any problems, please visit www.bt.com/producthelp
In this guide
Getting started
Location 5
Activate the batteries 5
Connect to the telephone line 5
Getting to know your phone 6
Using your phone
Make a call 7
Call timer 7
Preparatory dialling 7
End a call 7
Receive a call 7
Handsfree 8
Make a call in handsfree mode 8
Answer a call in handsfree mode 8
Switch to handsfree mode during a call 8
Adjust the handsfree volume 8
Last number redial 8
View the last number called 8
Call the last number dialled 9
Save the redial number to the directory 9
Delete the last number dialled 9
Mute 9
Directory
Store a name and number in the directory 10
View/dial an entry in the directory 10
Insert a pause in a number 10
Edit an entry in the directory 11
Delete a directory entry 11
Delete the entire directory 11
Caller Display and the calls list
Calls list 12
New calls 12
View the Calls list 12
Dial an entry in the Calls list 12
Copy a number in the Calls list to the directory 13
Delete an entry in the Calls list 13
Delete the entire Calls list 13
1571 Voice Mail indication
To access your voice mail messages 14
Turn 1571 on/off 14
Settings menu
BT Services 15
Pre-stored BT services numbers 15
Dial a pre-stored BT service 15
Add a new service 15
Edit a service 16
Delete a service 16
Restore all services 16
4
If you experience any problems, please visit www.bt.com/producthelp
Ringer volume 16
Ringer tone 16
Set the display time and date 17
Set the time format 17
Display contrast 18
General information
Safety 19
Cleaning 19
Product disposal instructions 19
Guarantee 20
Technical information 20
How many telephones can I have? 20
Switchboard compatibility 20
Switchboard external line access code 21
To insert a pause 21
Recall 21
R&TTE Directive 21
Declaration of Conformance 21
User Guide formats 21
5
If you experience any problems, please visit www.bt.com/producthelp
Battery low warning
When the batteries are low and in
need of replacing the display will
show the battery low icon .
Removing the batteries
If you ever need to remove the
batteries, firstly ensure that the
phone is disconnected from the
phone line and then turn the
phone over and remove the battery
compartment cover by pressing in
on the plastic clip and lifting the
cover off. Pull the ribbon to remove
the batteries.
IMPORTANT
Only use the telephone line cord
supplied otherwise your telephone
may not work.
Using your telephone on a
Broadband line?
If this product is to be used on a
broadband line then you must ensure
that it is connected via an ADSL
microfilter. Using this product on
a Broadband line without an ADSL
microfilter may cause problems with
this product and your Broadband
service. BT ADSL microfilters are
available at www.bt.com/shop and
most consumer electronic stores also
stock ADSL filters.
Getting started
Location
You need to place your BT Decor 2200 within 3 metres of a
telephone line socket so that the cable will reach.
Activate the batteries
1. Activate the batteries by pulling the plastic tab away from the
underside of the phone.
Connect the telephone line
1. Plug the telephone line cord into the telephone wall socket.
Set the display time and date
See page 17 for instructions.
Your BT Decor 2200 is now ready for use
6
If you experience any problems, please visit www.bt.com/producthelp
Getting to know your phone
07900 124456
AM
PM
NEW
07900 124456
AM
PM
NEW
Menu
Press to access the
Settings menu.
When viewing the Calls
list or directory, press to
access the sub menu list.
3 Line display
In standby, displays
the date and time.
Calls light
Red light flashes to
indicate an incoming call.
Directory
Use to store and dial
directory entries.
Back
Press to move back to
the previous menu
screen or press and hold
to return to the standby
display screen.
Redial/Up
Press to dial the last
number called.
Use to scroll up through
the menu, directory or
Calls list.
Calls/Down
Press to access the
Calls list.
Use to scroll down
through the menu,
directory or Calls list.
OK
Press to confirm a
menu selection.
Mute
(with LED indicator)
During a call, mutes your voice
so your caller cannot hear you.
The red LED illuminates when the
mute function is on.
Handsfree
– Vol. +
Use to increase or decrease the
handsfree loudspeaker volume.
Handsfree
(with LED indicator)
Press to use handsfree mode. The
green LED illuminates when the
handsfree function is in use.
1571
(with LED indicator)*
Press to automatically
dial 1571 to easily
access your BT 1571
or Call Minder service.
The green LED will
flash when you have
new messages waiting
on your network’s
answering service.
R (Recall)
Used with
switchboard
services
and certain
BT Calling
Features.
Microphone
When using handsfree your
voice is projected through
the base microphone.
* To use the 1571 feature, you must subscribe to your network provider’s network answering service
and batteries must be installed.
7
If you experience any problems, please visit www.bt.com/producthelp
When the handset is off the hook or
Handsfree is in use the display will
show the icon.
Using your phone
Making and receiving calls
Make a call
1. Lift the handset and wait for the dial tone (or press the
button).
2. Enter the telephone number.
Call timer
Your phone automatically times the duration of every call.
The timer will activate 5 seconds into an outgoing call and will
continue to display the time until 5 seconds after the call has
ended. The timer will be displayed as soon as you pick up the
handset to receive an incoming call.
Preparatory dialling
Preparatory dialling lets you view the telephone number on the
display before it’s dialled out. If the number you enter is more
than 16 digits, only the last 16 digits will be displayed.
1. Enter the telephone number first. If you make a mistake, press
the button to delete incorrect digits.
2. Lift the handset, or press the button to dial the number.
End a call
1. Replace the handset on the base or if using handsfree mode,
press the button.
Receive a call
1. When you receive a call, the telephone rings and the red
incoming call LED will flash. Simply pick up the handset
to answer the call or press the button to answer in
handsfree mode.
If you have subscribed to a Caller
Display Service the caller’s number
(and name if stored in the directory)
will be displayed when you receive a
call, see page 12.
8
If you experience any problems, please visit www.bt.com/producthelp
There are 5 loudspeaker volumes.
You cannot change the volume of the
handset earpiece.
Handsfree
Handsfree mode lets you talk to your caller without holding the
handset. It also allows other people in the room to listen to your
conversation over the loudspeaker. The green LED on the button
will illuminate when handsfree mode is in use and the icon will
be displayed on the screen.
Make a call in handsfree mode
1. Press the button and then enter the telephone number
to be dialled.
Answer a call in handsfree mode
1. When the phone rings, press the button to answer the call.
Switch to handsfree mode during a call
1. During a call, press the button and replace the handset
on the base.
2. To switch back to using the handset, simply pick the handset up.
Adjust the handsfree volume
Use the buttons to increase or decrease the
loudspeaker volume.
Last number redial
The redial memory holds the last telephone number dialled
(up to 32 digits).
View the last number dialled
1. Press the button. The number will be shown on the
display. If the last 6 digits match a number stored in the
directory, the name of the entry will be displayed as well.
9
If you experience any problems, please visit www.bt.com/producthelp
If a redial number is longer than
15 digits, the first 15 digits will be
displayed for about 3 seconds and
then the screen will scroll to display
the remaining digits. After 3 seconds
the screen reverts back and continues
to scroll back and forth until you
change the display information.
For help with entering names, see
page 10.
Call the last number dialled
1. Lift the handset or press the button, then press the
button. The last number called will be redialled.
Save the redial number to the directory
1. Press the button. The last number dialled is displayed.
2. Press the button. Save Number is displayed. Press .
3. Enter Name is displayed. Use the keypad to enter the name
and press .
4. Enter Number is displayed. Use the keypad to enter the
telephone number and press . Entry Saved is displayed.
Delete the last number dialled
1. Press the button. The last number dialled is displayed.
2. Press the button. Save Number is displayed.
3. Press to scroll to Delete Entry and press .
The display will show Entry Deleted.
Mute
When on a call use the mute feature to talk to someone in the
same room without your caller hearing.
1. During a call, press and release the Mute button to mute the
handset microphone. The red LED on the mute button will
illuminate to indicate that the mute feature is on. Your caller
now cannot hear you speak.
2. To switch mute off, press and release the Mute button again.
The LED will turn off and your caller will now be able to
hear you.
10
If you experience any problems, please visit www.bt.com/producthelp
Numbers stored without a name
will be displayed before
alphabetical entries.
Press and hold to exit the directory
and return to standby at any time.
Directory full
If you try to store a new entry and the
directory is full, Directory Full will
be displayed. You will need to delete
entries before you can add new ones,
see page 11.
Entering names
Use the keypad to enter the letters
shown on the buttons, e.g. to store
TOM:
Press once to enter T.
Press three times to enter O.
Press once to enter M.
Writing tips
If you make a mistake, press
to delete the last digit or character.
To enter a space, press once.
Press repeatedly to enter the
following punctuation symbols:
& - ‘ . , 1
Press to toggle between upper
and lower case characters.
If the next letter is on the same
button that you have just pressed,
wait until the cursor moves to the
right before trying to enter it.
If the telephone number is longer
than 15 digits, the first 15 digits will
be displayed for about 3 seconds and
then the screen will scroll to display
the remaining digits. After 3 seconds
the screen reverts back and continues
to scroll back and forth until you
change the display information.
Directory
You can store 50 names and telephone numbers in the directory.
Each name stored can be up to 15 characters and each number up
to 24 digits. Directory entries are stored alphabetically.
Store a name and number in the directory
1. Press the button.
If the directory is empty, the display will show Phonebook
Empty for 2 seconds and then Add Entry. Press the button.
Or, if there are already entries stored, the first alphabetical
entry will be displayed. Press the button, Add New
Entry will be displayed. Press the button.
2. Enter Name is displayed. Use the keypad to enter the name
then press .
3. Enter Number is displayed. Use the keypad to enter the
telephone number and press . Entry Saved is displayed.
View/dial an entry in the directory
1. Press the button, then use the or buttons to
scroll through to the entry you want. Or, to search alphabetically,
enter the first letter of the name you want e.g. for Emma, press
twice to display all entries beginning with the letter E, then
scroll using or to the entry you want.
2. When the entry you want is displayed press to dial in
Handsfree mode or pick up the handset.
Insert a pause in a number
Press the button in the place where you want a pause
inserted in the number.
Altri manuali per Decor 2200
1
Indice
Altri manuali BT Telefono
BT
BT RELATE 700 Manuale utente
BT
BT BT Synergy 5500 Manuale utente
BT
BT Decor 1300 Manuale utente
BT
BT PARAGON 400 PLUS Manuale utente
BT
BT CONVERSE 125 Manuale utente
BT
BT FREEHAND Manuale utente
BT
BT FeatureLine & Embark Manuale utente
BT
BT Synergy 700 Manuale utente
BT
BT DECOR 110 Manuale utente
BT
BT Big Button 200 Manuale utente
BT
BT EDGE 1500 Manuale utente
BT
BT FREELANCE 501 Manuale utente
BT
BT Diverse 6210 Manuale utente
BT
BT DECOR 310 Manuale utente
BT
BT DIVERSE 7150 Manuale utente
BT
BT Decor 2200 Manuale utente
BT
BT Revelation Guida utente
BT
BT PARAGON 400 PLUS Manuale utente
BT
BT Big Button 100 Manuale utente
BT
BT BIG BUTTON PLUS Manuale utente
