Burkert 8022 Series Manuale utente
Type 8022
Flow Transmitter / Pulse divider
Durchflusstransmitter / Impulsteiler
Transmetteur de débit / Diviseur d’impulsions
Quickstart (device Version 2)
English
2
1. QUICKSTART ...............................................................................3
2. INTENDED USE ..........................................................................5
3. BASIC SAFETY INSTRUCTIONS ...............................................6
4. GENERAL INFORMATION .....................................................8
5. DESCRIPTION .............................................................................9
6. TECHNICAL DATA .................................................................. 10
7. INSTALLATION AND START-UP ...................................... 15
8. ADJUSTMENT ........................................................................... 27
9. MAINTENANCE ...................................................................... 27
10. PACKAGING, TRANSPORT, STORAGE, DIS-
POSAL .......................................................................................... 28
English
3
1. QUICKSTART
Keep these instructions in a location which is easily accessible
to every user and make these instructions available to every
new owner of the device.
Important Safety Information!
Read the quickstart carefully and thoroughly. Study in
particular the chapters entitled Basic Safety Instructions
and Intended Use.
▶The quickstart must be read and understood.
The quickstart explains how to install and start-up the
device.
A detailed description of the device can be found in the
Operating Instructions for type 8022.
The Operating Instructions can be found on the
Internet at: country.burkert.com
English
4
1.1. Symbols
The following symbols are used in these instructions.
Caution
Warns of a possible danger!
▶Failure to observe this warning may result in a medium
or minor injury.
notiCe
Warns of damage to property!
Indicates important additional information, tips and
recommendations.
→designates a procedure that must be carried out.
1.2. Definition of the term device
In these instructions the term “device” refers to the Type
8022 flow transmitter or the Type 8022 pulse divider.
English
5
2. INTENDED USE
Use of the device that does not comply with the
Operating Instructions could present risks to people,
nearby installations and the environment.
The Type 8022 flow transmitter, associated to a
Bürkert flow sensor, converts the frequency signal
generated by the flow sensor into an analogue
4...20 mA current signal.
The Type 8022 pulse divider, associated to a Bürkert
flow sensor, converts the frequency signal generated by
the flow sensor into an adjustable frequency signal.
▶The device is designed for use in industrial environments.
▶Use the device in compliance with the characte-
ristics and start-up and use conditions specified
in the contractual documents and in the Operating
Instructions.
▶Do not use the device for security applications.
▶Use the device only if in perfect working order.
▶Properly transport, store, install and operate the device.
▶Only use the device as intended.
English
6
3. BASIC SAFETY INSTRUCTIONS
This safety information does not take into account any con-
tingencies or occurrences that may arise during installation,
use and maintenance of the product.
The operating company is responsible for the respect of
the local safety regulations including for the staff safety.
Risk of injury due to electrical voltage.
▶Before carrying out work on the system or the device,
disconnect the electrical power for all the conductors
and isolate it.
▶All equipment connected to the product must be
double insulated with respect to the mains according to
the standard UL/EN 61010-1.
▶Observe all applicable accident protection and safety
regulations for electrical equipment.
Various dangerous situations
To avoid injury, observe the following instructions:
▶Do not use the device in an environment incompatible
with the device materials.
▶Do not subject the device to mechanical stress.
English
7
Various dangerous situations
To avoid injury:
▶Do not use the device in explosive atmospheres.
▶Do not make any modifications to the device.
▶Prevent any unintentional power supply switch-on.
• Only qualified and skilled staff can carry out the instal-
lation and maintenance work.
• Guarantee a defined or controlled restarting of the
process, after a power supply interruption.
• Observe the general technical rules.
notiCe
Electrostatic sensitive components or modules.
The device contains electronic components, which react
sensitively to electrostatic discharge (ESD). Contact with
electrostatically charged persons or objects is hazardous
to these components. In the worst case scenario, they
will be destroyed immediately or will fail after start-up.
▶Observe the requirements in accordance with
EN 61340-5-1 to minimise and even avoid the pos-
sibility of damage caused by a sudden electrostatic
discharge.
▶Also, ensure that you do not touch electronic compo-
nents when the power supply voltage is present.
English
8
4. GENERAL INFORMATION
4.1. Contact
To contact the manufacturer of the device, use following
address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international sales offices are
available on the internet at: country.burkert.com
4.2. Warranty
The warranty is only valid if the device is used as intended in
accordance with the specified application conditions.
English
9
5. DESCRIPTION
Upon delivery, the device can be fitted or not with a display
unit. You need a display unit to do the settings for a correct
operation of the device. The display unit is available as an
accessory.
The device has either a cable gland or a 4-pin M12 male
connector.
The device has both a 4...20 mA current output and a tran-
sistor output. Thus it can operate either as a flow transmitter
or as a pulse divider.
→Combine the device with a Bürkert flow sensor that has
the following output:
• Type 8022 flow transmitter with a Bürkert flow sensor
that has a transistor output, in the Low Power device
variant of the following types: 8020, 8030, 8070, SE30.
• Type 8022 pulse divider with a Bürkert flow sensor that
has a transistor output of the types 8020, 8030, 8070,
SE30.
English
10
6. TECHNICAL DATA
6.1. Operating conditions
Ambient temperature –10...+60 °C
Operating condition Continuous operation
Mobility of the device Fixed device
Use Indoor use
Protect the device against electromag-
netic interference and ultraviolet rays.
IP-Code according to
IEC / EN 60529
IP65 1), if the following conditions are
respected:
• Cable gland wired or blanked-off,
or female connector plugged-in and
tightened
• Nut of the cable gland tightened with
a torque of 1 N·m ± 20 % (0.74 lbf·ft
± 20 %).
• Housing closed and screw tightened
to a torque of 0.3 N·m ± 20 % (0.22
lbf·ft ± 20 %), or display unit plugged
on the device and screw tightened
to a torque of 0.3 N·m ± 20 %
(0.22 lbf·ft ± 20 %).
Degree of pollution Degree 2 according to
UL/ EN 61010-1
1) not evaluated by UL
English
Altri manuali per 8022 Series
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Burkert Trasmettitore
Burkert
Burkert 8225 Manuale di istruzioni
Burkert
Burkert SE56 Manuale utente
Burkert
Burkert 8026 Manuale utente
Burkert
Burkert 8035 Manuale utente
Burkert
Burkert 8285 Manuale utente
Burkert
Burkert SE58 M Manuale utente
Burkert
Burkert 8081 Manuale utente
Burkert
Burkert 8175 Manuale utente
Burkert
Burkert 8137 Manuale utente
Burkert
Burkert 8025 Series Manuale utente
Burkert
Burkert 8175 Manuale utente
Burkert
Burkert SE58 L Manuale utente
Burkert
Burkert 8222 ELEMENT NEUTRINO Manuale utente
Burkert
Burkert 8026 Manuale utente
Burkert
Burkert 8176 Istruzioni per l'installazione
Burkert
Burkert 8045 Manuale utente
Burkert
Burkert 8025 UNIVERSAL Manuale utente
Burkert
Burkert 8022 Series Manuale utente
Burkert
Burkert 8139 Manuale utente
Burkert
Burkert 8225 Manuale utente
