2
English
SE58 S
INTRODUCTION
• These operating instructions and the description of device functions are provided as part of the scope of
supply.
• They could be modified without prior notice. The improper use, possible tampering of the device or parts of
it and substitutions of any components not original, renders the warranty automatically void.
• The flow meter realizes a measure with liquids of conductivity greater than 20µS/cm in closed conduits, and
is composed of a transmitter (described in this manual) and a sensor (refer to the specific manual).
• The transmitter could be coupled directly on the sensor (compact version).
Any other use than the one described in this manual aects the protection provided by the manufacturer and
compromises the safety of people and the entire measuring system and is, therefore, not permitted.
The manufacturer is not liable for damaged caused by improper or non-designated use.
Transport the measuring device to the measuring point in the original packaging. In case of carton packaging it is
possible to place one above the other but no more than three cartons. In case of wooden packaging don’t place
one above the other.
Disposal of this product or parts of it must be carried out according to the local public or private waste collection
service regulations.
The electromagnetic flow meter must only be installed, connected and maintained by qualified and authorized
specialists (e.g. electrical technicians) in full compliance with the instructions in these Operating Instructions, the
applicable norms, legal regulations and certificates (depending on the application).
The specialists must have read and understood these Operating Instructions and must follow the instructions it
contains. If something isn’t clear to you in these Operating Instructions, you must call the Bürkert service. The
Operating Instructions provide detailed information about the device.
SAFETY INFORMATION
TRANSMITTER
SENSOR
