i
DISCLAIMER
The information in this document has been checked and
is believed to be entirely reliable, however no
responsibility is assumed for inaccuracies. BVM Ltd.
reserves the right to make changes and/or improvements
in both the product and the product documentation without
notice. BVM Ltd. does not assume any liability arising out
of the application or use of any product described herein;
neither does it convey any licence under its patent rights
or the rights of others.
USE OF PRODUCT
This product has been designed to operate in a PMC
compatible electrical environment. Insertion and removal
of the module or cable(s) from the carrier board must not
be done whilst in a powered condition.
Do not lever out any devices from the product, which uses
surface-mounted devices extensively, as these can be
fractured by excessive force.
This product uses devices sensitive to static electricity.
Ensure adequate static electricity precautions are
observed when handling the product and associated
devices.
RF. INTERFERENCE
This product complies with European Council Directive
89/336/EEC (EMC directive), and conforms to EN55022 :
1994 Class B (Limits and methods of measurement of
radio interference characteristics of information
technology equipment) and EN50082-1 : 1997
(Electromagnetic compatibility - Generic immunity
standard, Part 1: residential, commercial and light
industry) when used in accordance with the BVM EMC
Guidelines Manual part number 454-77000 (available on
request from BVM Ltd.).
GENERAL NOTICES
UNPACKING AND INSPECTION
This product contains components which are
susceptible to static discharge, and should be
handled with appropriate caution.
Upon receipt of this product, visually inspect the board for
missing, broken or damaged components and for physical
damage to the printed circuit board or connectors. This
product was shipped in perfect physical condition. Any
physical damage to the product is the responsibility of the
shipping carrier and should be reported to the carrier's
agent immediately.
RETURN OF GOODS
Before returning a product for repair, verify as well as
possible that the suspected unit is at fault. Then call BVM
Ltd. for a Customer Return (CR) number. Carefully
package the unit, in the original shipping carton if this is
available, and ship prepaid and insured, preferably by
courier, with the CR number written on the outside of the
package.
Include a return address and the telephone number of a
technical contact, and a detailed description of the
observed fault. For out-of-warranty repairs, a purchase
order for repair charges must accompany the return. BVM
Ltd. will not be responsible for damage due to improper
packaging of returned items. Out of warranty repairs can
be arranged, and will be charged on a material and labour
basis, subject to a minimum repair charge. Return
transportation and insurance will be charged as part of the
repair and is in addition to the minimum charge.
SOFTWARE LICENCE NOTICE
Any software that is provided as Copyright BVM Ltd. is
proprietary and confidential property of BVM Ltd., and
each single copy is given on the agreed understanding
that it is licensed for use on product combinations
supplied by BVM Ltd. or their appointed distributors only.
The software product may not be copied (except for
backup purposes), given away, rented, loaned,
reproduced, distributed or transmitted in any way or form,
in whole or in part, without written permission of BVM Ltd.
This applies to any merged, modified or derivative version
of the software including, but not limited to, versions
produced by customising, translating, reverse
engineering, de-compiling or disassembly.
This licence may be automatically terminated without
notice if any of its provisions are breached. Reasonable
legal costs may be awarded to the prevailing party in
connection with this licence agreement. Use of, or
accepted delivery of these products shall constitute your
acceptance of the provisions of this licence agreement.
WARRANTY
A) BVM Ltd. warrants that the articles furnished hereunder
are free from defects in material and workmanship for one
year after the date of shipment.
B) All warranties and conditions, express and implied,
statutory and otherwise, as to the quality of the goods or
their fitness for any purpose are hereby excluded and with
the exception of liability for death or personal injury
caused by negligence as defined in the Unfair Contract
Terms Act 1977 the seller shall not be liable for any loss,
injury or damage arising directly or indirectly from the use,
application or storage of such goods.
C) Subclause (B) above shall not apply where the buyer
deals as a consumer as this expression is defined in the
Unfair Contract Terms Act 1977.
D) The liability of BVM Ltd. hereunder shall be limited to
repair or replacement at the manufacturers discretion of
any defective unit. Equipment or parts which have been
subject to abuse, misuse, accident, alteration, neglect,
unauthorised repair or installation are not covered by this
warranty. BVM Ltd. shall have the right of determination
as to the existence and cause of any defect.
E) The warranty period of the replacement or a repaired
product or part shall terminate with the termination of the
warranty period with respect to the original product or part
for all replacement parts supplied or repairs made during
the warranty period.
F) Although BVM Ltd. offer a high level of technical
support and advice, due to the complex nature and wide
application of product configurations it is the
responsibility of the purchaser to be satisfied at the time
of purchase that the products are suitable for the final
application.
G) The term 'Software' used herein is defined as 'any
program data or code in source or binary format recorded
in or on any readable device or media'.
H) BVM Ltd. will effect all reasonable effort to resolve
accepted reproducible software errors reported within 12
months of purchase. Acceptance of an error shall solely
be based on conformance to supporting specifications.
Proper operation of earlier releases is not guaranteed.
NOTICES
Copyright 2000 by BVM Ltd.
All trademarks are acknowledged to their respective
owners.
